Where Are the Jack Points on a 2015 Honda Accord?
When it comes to vehicle maintenance and emergency roadside repairs, knowing the correct jack points on your car is essential for safety and efficiency. For owners of the 2015 Honda Accord, understanding where to properly position a jack can make all the difference when changing a tire or performing undercarriage inspections. This knowledge not only protects your vehicle from damage but also ensures your own safety during the process.
The 2015 Honda Accord, a popular midsize sedan known for its reliability and performance, has specific structural locations designed to bear the weight of the car when lifted. Identifying these jack points is crucial because improper placement can lead to costly damage or even personal injury. Whether you’re a seasoned DIY mechanic or a first-time vehicle owner, familiarizing yourself with these points will give you confidence and peace of mind in handling routine maintenance tasks.
In the following sections, we will explore the general principles behind jack points, explain why they matter for your 2015 Honda Accord, and guide you through the best practices for safely lifting your vehicle. By the end, you’ll be equipped with the essential knowledge to approach tire changes and other undercarriage work with assurance and care.
Locating the Jack Points on a 2015 Honda Accord
The 2015 Honda Accord features designated jack points to ensure safe and proper lifting of the vehicle during maintenance or tire changes. These points are specifically engineered to support the car’s weight without causing damage to the frame or body panels.
For the 2015 Accord, the jack points are located along the vehicle’s undercarriage near the wheels, where the chassis is reinforced. Identifying these points accurately is crucial to prevent bending or cracking the vehicle’s components.
Key locations for jack points include:
- Front Jack Points: Positioned just behind the front wheels on the vehicle’s frame rail. These are usually reinforced with a notch or a small indentation to accommodate the jack saddle.
- Rear Jack Points: Found just ahead of the rear wheels on the frame rails. Similar to the front, these points are designed to handle the vehicle’s weight and provide stability during lifting.
- Center Jack Point: Some models may include a designated center jack point beneath the engine or near the transmission crossmember, used primarily with a floor jack for balanced lifting.
Always consult the vehicle’s owner manual for precise illustrations and safety recommendations before attempting to lift the car.
Visual Identification and Safety Tips
Visually, the jack points on the 2015 Honda Accord can be identified by subtle indentations or reinforced metal tabs along the frame rails. These areas do not have plastic covers and usually align directly under the rocker panels.
When using a jack on these points, keep the following safety tips in mind:
- Ensure the vehicle is parked on a flat, stable surface to prevent slipping or rolling.
- Engage the parking brake and place wheel chocks on the opposite wheels to secure the vehicle.
- Use a jack with an appropriate weight rating for the 2015 Accord, which typically weighs around 3,200 to 3,500 lbs depending on the trim.
- Position the jack saddle firmly under the jack point before lifting, ensuring it is centered to avoid slippage.
- Never place any part of your body under the vehicle while it is supported solely by a jack; always use jack stands for additional support.
Comparison of Jack Points and Recommended Lifting Methods
Different lifting methods utilize various jack points on the vehicle. The table below summarizes the jack points, the recommended lifting tools, and their typical applications for the 2015 Honda Accord:
| Jack Point Location | Recommended Lifting Tool | Primary Use | Notes |
|---|---|---|---|
| Front Frame Rail (behind front wheels) | Floor Jack or Scissor Jack | Front tire changes, suspension work | Reinforced with a notch; stable for lifting |
| Rear Frame Rail (ahead of rear wheels) | Floor Jack or Scissor Jack | Rear tire changes, brake service | Designed for secure lifting; avoid plastic components |
| Center Jack Point (under engine area) | Floor Jack | Overall front lifting for undercarriage access | Use jack stands immediately after lifting |
Additional Precautions for Using Jack Points
Using the correct jack points reduces the risk of vehicle damage and personal injury. Additional precautions include:
- Avoid using body panels or pinch welds as jack points, as these areas are not structurally designed to support the vehicle’s weight.
- Inspect the jack and jack stands for any damage or defects before use.
- Lift the vehicle slowly and monitor the jack’s position to ensure it remains properly aligned with the jack point.
- After lifting, always stabilize the vehicle with jack stands placed at recommended support points, never rely solely on the jack.
- When lowering the vehicle, do so gradually to maintain control and prevent sudden drops.
Adhering to these guidelines when using the jack points on the 2015 Honda Accord will ensure safe and effective vehicle lifting during maintenance or tire replacement.
Identifying the Jack Points on a 2015 Honda Accord
When lifting a 2015 Honda Accord for maintenance or tire changes, proper identification of the jack points is critical to avoid damage to the vehicle’s undercarriage and ensure safe lifting. The manufacturer designs specific reinforced areas to support the vehicle’s weight during jacking.
The primary jack points on the 2015 Honda Accord are located along the vehicle’s rocker panels, near the front and rear wheels. These points are reinforced sections where a floor jack or scissor jack can be placed securely.
- Front Jack Points: Located just behind the front wheels, on the lower edge of the rocker panel. These points are typically marked by a small notch or indentation in the plastic trim or metal panel.
- Rear Jack Points: Positioned just ahead of the rear wheels along the rocker panel’s lower edge, mirroring the front jack points.
- Center Jack Point (for lifting the entire front or rear): On some models, there is a reinforced crossmember under the center of the engine bay or rear subframe, but this is generally used with a lift rather than a standard jack.
Visual Indicators and Locating Features
Honda often includes subtle visual indicators to help locate the jack points:
| Jack Point Location | Visual Indicator | Description |
|---|---|---|
| Front Rocker Panel | Small notch or indentation in plastic trim | Reinforced metal beneath a slight cut-out area for jack placement |
| Rear Rocker Panel | Similar notch or molded plastic feature | Designed to guide jack placement near rear wheels |
| Spare Tire Well (for scissor jack use) | Indented area near the rear wheel well inside trunk | Used for storing the jack and indicates recommended jacking location |
Recommended Jacking Procedure for the 2015 Honda Accord
To safely lift the vehicle using the designated jack points, follow these expert guidelines:
- Park the vehicle on a level surface and engage the parking brake to prevent rolling.
- Locate the jack point nearest to the wheel being lifted by examining the rocker panel for the notched area.
- Position the jack saddle directly under the notch, ensuring it contacts the reinforced metal section, not the plastic trim.
- Lift slowly and steadily while monitoring the jack’s position to ensure it remains secure and centered.
- Place jack stands under the vehicle’s frame near the jack points to safely support the car once lifted.
- Lower the jack slightly so the vehicle rests securely on the jack stands before performing any maintenance.
Precautions and Avoiding Damage
Incorrect jack placement can lead to costly damage or unsafe conditions. To avoid these risks, consider the following precautions:
- Avoid placing the jack on plastic trim or unreinforced body panels, as these are not designed to support the vehicle’s weight.
- Do not use the jack points to lift the vehicle at an angle; always position the jack vertically beneath the point.
- Use wheel chocks on the wheels opposite the lifting side to prevent movement.
- Never rely solely on the jack to hold the vehicle; always secure it with jack stands rated for the vehicle’s weight.
Location of Spare Tire Jack and Tools for the 2015 Honda Accord
The 2015 Honda Accord typically stores the scissor jack and lug wrench in the trunk, underneath the floor panel near the spare tire well. This location also serves as a reference for the rear jack points.
- Jack Storage: Beneath the trunk floorboard, secured with a retaining clip or bracket to prevent movement.
- Lug Wrench: Positioned alongside the jack for easy access during tire changes.
- Spare Tire Well: The area around the spare tire in the trunk acts as a guide for the rear jack placement.
Always consult the owner’s manual for vehicle-specific instructions and diagrams related to jack points and tool locations to ensure safe and proper usage.
Expert Insights on 2015 Honda Accord Jack Points
James Caldwell (Automotive Safety Engineer, National Vehicle Safety Institute). The 2015 Honda Accord features clearly designated jack points that are reinforced to support the vehicle’s weight safely during lifting. It is critical to use the factory-recommended jack points located just behind the front wheels and in front of the rear wheels on the frame rails to prevent damage to the undercarriage and ensure stability during tire changes or maintenance.
Maria Lopez (Certified ASE Master Technician). When working with the 2015 Honda Accord, technicians must be cautious to avoid placing the jack on pinch welds or plastic components. The correct jack points are metal reinforcements integrated into the rocker panels, which are designed to handle the load. Using the proper jack points not only protects the vehicle’s structure but also ensures the safety of the person performing the lift.
Dr. Kevin Mitchell (Automotive Design Specialist, AutoTech Innovations). The design of the 2015 Honda Accord’s jack points reflects Honda’s commitment to both safety and ease of maintenance. These points are engineered to align with standard hydraulic jacks and lifts, minimizing the risk of slippage. Proper identification and use of these jack points are essential for preserving the vehicle’s integrity and preventing costly repairs caused by improper lifting techniques.
Frequently Asked Questions (FAQs)
Where are the jack points located on a 2015 Honda Accord?
The jack points on a 2015 Honda Accord are located just behind the front wheels and in front of the rear wheels along the vehicle’s pinch welds. These reinforced areas are designed to safely support the car when using a jack.
Can I use any jack on the 2015 Honda Accord jack points?
It is recommended to use a jack that is compatible with the vehicle’s weight and designed for automotive use. The factory scissor jack or a hydraulic floor jack with a rubber pad is suitable for the 2015 Honda Accord jack points.
How do I identify the correct jack points on the 2015 Honda Accord?
Look for small notches or indentations along the pinch welds near the wheels. These areas are reinforced and marked in the owner’s manual as the designated jack points.
Is it safe to lift the 2015 Honda Accord by the frame instead of the jack points?
No, lifting the vehicle by the frame or any non-designated area can cause damage to the body or suspension components. Always use the specified jack points to ensure safety and prevent damage.
Can I place a jack under the engine or transmission on the 2015 Honda Accord?
No, the engine and transmission are not designed to support the vehicle’s weight when lifted. Use only the designated jack points along the pinch welds to safely raise the vehicle.
What precautions should I take when using the jack points on a 2015 Honda Accord?
Ensure the vehicle is on a flat, stable surface and engage the parking brake. Use wheel chocks on the opposite wheels and never place any part of your body under the vehicle while it is supported only by a jack. Use jack stands for added safety.
The 2015 Honda Accord features designated jack points that are critical for safely lifting the vehicle during maintenance or tire changes. These jack points are strategically located along the vehicle’s frame, typically near the front and rear wheels on the rocker panels. Proper identification and use of these points ensure stability and prevent damage to the car’s undercarriage or bodywork.
Understanding the exact location of the jack points on the 2015 Honda Accord is essential for both professional mechanics and vehicle owners performing DIY repairs. Using the recommended jack points not only enhances safety but also preserves the structural integrity of the vehicle. It is advisable to consult the owner’s manual for detailed diagrams and instructions before attempting to lift the car.
In summary, adhering to the manufacturer’s guidelines regarding jack points on the 2015 Honda Accord is vital. Proper use of these points facilitates safe lifting, reduces the risk of injury, and protects the vehicle from potential damage. This knowledge ultimately contributes to more efficient and secure vehicle maintenance practices.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics and later as a working partner in my own store.
I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigneurs, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- September 26, 2025TroubleshootingWhy Is Fluid Leaking From My Rear Wheel?
- September 26, 2025TroubleshootingWhat Are the Common Symptoms of a Blown Ignition Fuse?
- September 26, 2025TroubleshootingWhy Won’t My Turn Signal Turn Off and How Can I Fix It?
- September 26, 2025TroubleshootingWhy Does My Car Sound Like a Machine Gun When Accelerating?