How Much Does a Subaru Forester Brake Pad Replacement Cost?

Subaru Forester brake pad replacement cost is a necessary expense for any Subaru Forester owner. The cost of replacing the brake pads can vary by several factors, such as the type of brake pad, the labor involved, and the parts that need to be replaced. Generally, front brake pads will cost between $50 and $150 per set, while rear brake pads will cost between $100 and $200 per set. Labor costs for the replacement of these parts can range from around $50 to over $100 depending on the type of vehicle, and whether or not replacement rotors are required. Additionally, extra parts may need to be purchased such as calipers and hardware kits. All in all, total costs for Subaru Forester brake pad replacement can range from around $200 to over $400 depending on the complexity of the job.

Automobile: Subaru Forester Brake Pad Replacement Cost

Replacing the brake pads on your Subaru Forester is an important step in keeping your vehicle in top condition. Not only can it improve performance, but it can also improve your car’s fuel efficiency and safety features. When considering replacing the brake pads, it is important to understand the factors that influence the cost of the replacement and the benefits of doing so.

Estimated Cost

The estimated cost of replacing brake pads on a Subaru Forester will vary depending on several factors. These include parts and labor, location, vehicle age, as well as model. Generally speaking, labor costs for brake pad replacement will range from $50 to $100 per hour depending on the complexity of the job and where you are located. Parts costs can range from around $25 to $50 per set depending on what type of pads you choose and if any additional parts are needed.

Parts and Labor

When considering replacing the brake pads on your Subaru Forester, you will need to factor in parts and labor costs. Labor costs will depend largely on where you take your vehicle for repair as well as how complex the job is. For instance, some jobs may require additional parts or more complex tools which can drive up labor costs significantly. Parts costs will also depend largely on what type of pads you choose as well as if any additional parts are needed for installation such as a new rotor or caliper bracket.

Location

The location of where you take your car for brake pad replacement will also influence cost significantly. Some locations may charge higher rates due to higher overhead costs or simply due to prices being market driven in certain areas. It is always best to shop around before deciding where to take your vehicle for repair as this can help save both time and money in the long run.

Vehicle Age and Model

Finally, vehicle age and model will also have an effect on cost when replacing brake pads on a Subaru Forester. Older models may require special tools or more time consuming jobs which can drive up labor costs significantly while newer models may use more expensive parts that require special tools for installation driving up parts costs significantly.

Benefits of Replacing Brake Pads On Subaru Forester

Replacing brake pads on a Subaru Forester offers several benefits beyond just improved performance and safety features including better fuel efficiency due to reduced friction between components while braking, improved stopping power due to increased contact between components while braking, enhanced durability due to improved wear resistance from quality materials used in manufacturing modern brake pad sets, improved braking system performance due to increased rotor life from less heat build-up caused by less friction between components while braking and lastly reduced noise levels due to improved dampening properties of quality materials used in modern brake pad sets.

Extend the Life of Your Subaru Forester

The Subaru Forester is a reliable and dependable SUV that has been around for many years. It is one of the most popular vehicles on the market today and it’s easy to see why. With its comfortable ride and great fuel economy, it’s no wonder why so many people choose this vehicle. However, like any car, it needs regular maintenance in order to keep it running smoothly. One of the most important things you can do to extend the life of your Subaru Forester is to replace its brake pads regularly. Brake pads are an important part of your vehicle’s safety system and should be replaced as soon as they start to wear out.

How to Replace Brake Pads on a Subaru Forester?

Replacing brake pads on a Subaru Forester can be done fairly easily if you have some basic mechanical knowledge and tools. There are four stages involved in replacing your vehicle’s brake pads: preparation, removal, installation, and testing stages.

The Preparation Stage involves gathering all the necessary tools and materials needed for the job such as a brake pad set, lug wrench, jack stands, and wrenches for removing calipers. It is also important to make sure that your vehicle is parked on flat ground with the parking brakes engaged before beginning any work on it.

In the Removal Stage, you will first need to remove the wheels from your vehicle using a lug wrench. Once this is done, you can then access the calipers which house the brake pads. To remove them from their mounting brackets use two wrenches – one for each side – while applying pressure in opposite directions at once until they come free.

In the Installation Stage you will now reinstall new brake pads into their respective calipers by lining them up with their mounting slots before slowly pushing them into place until they click into place securely.

Finally in the Testing Stage it is important to test out your new brakes by pressing down lightly on each pedal several times while keeping an eye out for any squealing or vibrations which could indicate a problem with your installation or poor quality parts being used in replacement. If everything checks out ok then congratulations – you have successfully replaced your vehicle’s brakes!

Common Issues with Subaru Forester Brake Pads

As with any car part there can be some common issues that arise when dealing with brakes on a Subaru Forester such as worn out or damaged brake pads due to excessive wear over time or incorrect installation; leaking fluid from either side of the system; and poor performance of the brakes due to air trapped in lines or low levels of hydraulic fluid within them. It’s always best practice when dealing with these kinds of issues to take your car into a professional mechanic who can properly diagnose what’s going on and provide an effective solution quickly and safely so that you can get back on the road quickly without further problems arising down the line with your braking system again in future trips!

Recommended Tools for Replacing Subaru Forester’s Brake Pads

When changing out brake pads on a Subaru Forester there are certain tools that will be required in order to complete this job correctly and safely including but not limited to: lug wrench, jack stands, wrenches for removing calipers (two per side), socket set (for removal/installation of bolts), hammer (for loosening tight bolts) as well as pliers if needed during installation/testing stage; replacement brake pad set; gloves; rags; goggles (to protect eyes from debris);and finally brake cleaner (to clean off old pad debris). It is also recommended that one has access to an automotive lift which will make accessing all areas much easier during removal/installation process however if this isn’t available then using jack stands should suffice just fine!

FAQ & Answers

Q: What is the Estimated Cost for Replacing Brake Pads on a Subaru Forester?
A: The cost of replacing brake pads on a Subaru Forester can vary depending on several factors, such as parts and labor, location, and vehicle age and model. Generally, the replacement of brake pads will range between $150 and $400.

Q: What are the Benefits of Replacing Brake Pads on a Subaru Forester?
A: Replacing brake pads on a Subaru Forester can offer numerous benefits, including better fuel efficiency, improved safety features, enhanced performance, and extended life of your vehicle.

Q: How Do I Replace Brake Pads on a Subaru Forester?
A: Replacing brake pads on a Subaru Forester involves four stages – preparation stage, removal stage, installation stage, and testing stage. It is important to follow all steps carefully to ensure the safe installation of new brake pads.

Q: What are Common Issues with Subaru Forester Brake Pads?
A: Common issues with Subaru Forester brake pads include worn out or damaged brake pads, leaking fluid from the system, and poor performance of the brakes.

Q: What Tools are Recommended for Replacing Subaru Forester’s Brake Pads?
A: To successfully replace the brake pads on a Subaru Forester it is recommended to use specific tools such as pliers, calipers removal tool kit or screwdriver set or ratchet set with sockets and wrenches. Additionally it is important to use safety equipment such as gloves and eye protection when performing this task.

In conclusion, the Subaru Forester brake pad replacement cost varies greatly depending on the type of brake pads chosen and the labor cost associated with the installation. Generally, it is recommended to replace all four brake pads at once for optimal performance and safety. The total cost of a brake pad replacement on a Subaru Forester can range from $200 to $800, depending on the quality and type of brake pad chosen. It is important to always consult with a certified mechanic before replacing any parts in your vehicle.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts