What Is the Honda CRV Oil Filter Wrench Size?

AvatarByCarl Frisch

The Honda CRV is a popular and reliable mid-size SUV manufactured by Honda. It is important to regularly maintain the engine of the CRV, which includes changing the oil and oil filter. To do this, you will need the right size of oil filter wrench for your specific model of Honda CRV. The size of the wrench will vary depending on the model year. For most 2005-2011 models, a 14mm wrench is recommended. For 2012-2017 models, an 18mm wrench should be used. It is always best to consult your owner’s manual or speak with a certified mechanic to confirm the correct size wrench for your Honda CRV.

Automobile: Honda CRV Oil Filter Wrench Size

Tools Required for Changing Oil in a Honda CRV

When it comes to changing the oil in a Honda CRV, you will need to have the right tools and supplies on hand. The most important tool that you will need is an oil filter wrench. This wrench is designed to fit over the oil filter and allow you to easily unscrew it from its housing. Other necessary items include an oil filter, an oil drain pan, gloves, and rags or towels.

How to Use an Oil Filter Wrench for a Honda CRV

Using an oil filter wrench on your Honda CRV is relatively simple. First, make sure that your vehicle is parked on a level surface and that the engine has been turned off for several hours so that any excess heat can dissipate. Next, locate the oil filter near the engine block and use the wrench to loosen it counter-clockwise. Once loosened, remove the old filter from its housing and replace it with a new one of the same size or type. Finally, reattach the new filter using your oil filter wrench and tighten until snug.

Different Types of Oil Filter Wrenches

When selecting an oil filter wrench for your Honda CRV, there are several different types available on the market today. The most basic type is an adjustable strap wrench which can be used on various sizes of filters depending on how tight or loose it needs to be adjusted. Another popular option is a ratcheting style which allows you to easily turn large filters with minimal effort while also providing maximum grip strength when needed. Finally, there are specialty wrenches such as those designed specifically for Japanese cars which are often required due to their unique designs and materials used in their construction.

Benefits of Investing in an Oil Filter Wrench Set

Investing in an oil filter wrench set can be beneficial if you own multiple vehicles or plan on changing your car’s oil regularly. With a set, you will have all of the necessary tools at hand instead of having to purchase each individually when needed. Some sets even come with additional accessories such as extension bars for reaching deeper into tight spaces or universal joints for working around awkward angles. Having these extra items can save time by eliminating trips back and forth from stores in search of specific tools for each job.

Which Oil Filter Wrench is Best for a Honda CRV?

When it comes to changing the oil in your Honda CRV, you will need to make sure that you have the correct oil filter wrench size. The proper size will depend on the model and year of your vehicle. It is important to use the correct size or else the filter may not be properly seated and could cause damage to your engine.

The Honda CRV oil filter wrench size for models from 2001-2016 is 64mm x 14 flutes. This size is also suitable for other models such as Civic, Accord, and Odyssey. If you are unsure of what size you need, it is best to consult your owner’s manual or ask an expert at an auto store.

Steps for Changing the Oil in a Honda CRV

Changing the oil in your Honda CRV is a simple process that can be done in just a few easy steps. Before beginning, make sure that you have all of the necessary tools and supplies such as an oil filter wrench, new oil filter, new oil, drain pan, and funnels.

First, prepare your vehicle by parking on level ground and turning off the engine. Then open up the hood and remove the old oil filter using an appropriate sized oil filter wrench. To do this, unscrew it counterclockwise until it comes off easily without forcing it too much or damaging any parts. Place it in a bowl so that any remaining residue can be disposed of properly later on.

Next step is to drain out all of the old engine oil into a drain pan or other collection container before replacing with new oil. To do this, locate the drain plug underneath the car near where transmission meets engine and remove it with an appropriate sized wrench or socket set before allowing all of the old oil to drain out completely into collection container below. Replace plug when finished draining old fluid out completely before disposing of it properly according to local regulations.

Once all of old fluid has been drained out completely, install new oil filter by screwing it onto engine block until tight but not overly so as this could cause damage if done incorrectly or too tightly! Finally fill up with new motoroil according manufacturer’s specifications found either online or in owner’s manual while ensuring not to overfill past full line on dipstick gauge indicator located underneath hood near windshield side panel before closing up hood securely after completion!

Benefits of Regularly Changing The Oil In A Honda CRV

Regularly changing your vehicle’s motoroil can help improve its overall performance and fuel efficiency significantly over time as well as increase its lifespan significantly versus not changing regularly at all! This is because fresh motoroil helps lubricate moving parts which reduces friction between them which leads to less heat buildup thus improving fuel efficiency while also helping reduce wear & tear on internal components which helps extend lifespan significantly! Additionally regular motoroil changes can help ensure that any contaminants are removed from system which helps keep running smoothly without interruption due troubleshooting issues caused by dirt buildup over time!

FAQ & Answers

Q: What is the size of an oil filter wrench for a Honda CRV?
A: The size of an oil filter wrench for a Honda CRV is a 64mm 16-flute end cap wrench.

Q: What tools are required to change the oil in a Honda CRV?
A: Tools required to change the oil in a Honda CRV include an oil filter wrench, an oil pan, a ratchet and socket set, and new oil and filter.

Q: How do I use an oil filter wrench for a Honda CRV?
A: To use the oil filter wrench, attach it to the old oil filter and turn it counterclockwise to loosen and remove it. Then use the same tool to attach and tighten the new filter by turning clockwise.

Q: What are the different types of oil filter wrenches?
A: There are several types of oil filter wrenches available including strap wrenches, cup wrenches, end cap wrenches and socket wrenches.

Q: What are the benefits of regularly changing the oil in a Honda CRV?
A: The benefits of regularly changing the oil in a Honda CRV include improved engine performance, increased fuel efficiency, reduced wear on engine components, and prevention of sludge buildup.

In conclusion, the Honda CRV oil filter wrench size is 14 flutes and 3/8 inch drive. This size can be used to easily remove and replace the oil filter on your Honda CRV. It is important to follow the manufacturer’s instructions when using the wrench to ensure a safe and successful operation.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts