Why Does the 2019 Honda CRV Tire Pressure Light Keep Coming On?
If you own a 2019 Honda CR-V, you might have noticed the tire pressure warning light flickering on your dashboard unexpectedly. This alert is designed to keep you safe by notifying you when your tires aren’t properly inflated, but when it keeps coming on repeatedly, it can become a source of frustration and concern. Understanding why this happens and what it means for your vehicle is essential to maintaining optimal performance and safety on the road.
The tire pressure monitoring system (TPMS) in the 2019 Honda CR-V plays a crucial role in alerting drivers to potential issues with tire pressure, which can affect fuel efficiency, tire wear, and overall handling. However, the warning light can sometimes activate due to a variety of factors beyond just low tire pressure, making it important to explore all possible causes. Whether it’s a sensor malfunction, environmental conditions, or actual tire problems, knowing what triggers the light can help you address the issue promptly and effectively.
In the sections ahead, we’ll delve into the common reasons why the tire pressure light keeps coming on in the 2019 Honda CR-V, how to troubleshoot the problem, and what steps you can take to ensure your vehicle remains safe and reliable. By gaining a clearer understanding of this warning system, you’ll be better equipped
Common Causes for the Tire Pressure Light Activation
The tire pressure warning light on a 2019 Honda CRV can illuminate for several reasons, often related to the Tire Pressure Monitoring System (TPMS) detecting a deviation from the recommended tire pressure. Understanding these causes can help in diagnosing and resolving the issue promptly.
One of the most frequent reasons for the light coming on is an actual drop in tire pressure. This can result from natural air loss over time, temperature fluctuations, or a puncture. A decrease of just a few PSI below the manufacturer’s recommended level will trigger the warning light. It is important to check tire pressures regularly, especially during cold weather when air contracts and pressure drops.
Another common cause is a malfunction in the TPMS sensors themselves. These sensors are installed in each wheel and transmit pressure data to the vehicle’s computer. Sensor battery failure, damage during tire changes, or sensor misalignment can cause erroneous readings or loss of signal, leading the warning light to activate despite normal tire pressure.
Additionally, issues with the TPMS system’s receiver or the vehicle’s onboard computer can cause alerts. Software glitches or electrical faults may require a system reset or professional diagnostic tools to identify and resolve.
Environmental factors such as driving through deep water or rough terrain can temporarily interfere with sensor signals. In some cases, the light may come on briefly and then turn off once normal conditions resume.
Steps to Troubleshoot and Reset the Tire Pressure Light
When the tire pressure light keeps coming on in a 2019 Honda CRV, a systematic approach to troubleshooting will help isolate the problem. Follow these steps to verify the tire pressures and reset the system if necessary:
- Check Tire Pressures: Use a reliable tire pressure gauge to measure the pressure in all four tires, including the spare if equipped with a sensor. Compare the readings to the recommended PSI values listed on the driver’s door jamb or in the owner’s manual.
- Inspect Tires for Damage: Look for visible punctures, cuts, or embedded objects that could cause slow leaks.
- Inflate Tires as Needed: Adjust all tires to the manufacturer’s recommended pressure. Avoid over-inflation, which can also affect sensor readings.
- Drive the Vehicle: Sometimes, the system requires a few minutes of driving at speeds above 25 mph to recalibrate and turn off the warning light after pressures are corrected.
- Reset the TPMS: If the light remains on, use the TPMS reset button (usually located under the steering wheel or in the glove box). Hold the button until the light blinks three times, then drive to allow the sensors to recalibrate.
- Consult a Professional: Persistent warnings after these steps may indicate sensor failure or other system issues requiring diagnostic equipment.
| Troubleshooting Step | Description | Expected Outcome |
|---|---|---|
| Check Tire Pressure | Measure PSI in all tires with a gauge | Identify under-inflated tires |
| Inspect Tires | Look for punctures or damage | Detect sources of slow leaks |
| Inflate Tires | Adjust to recommended PSI | Restore proper tire pressure |
| Drive Vehicle | Drive at speeds above 25 mph for several minutes | Allow TPMS recalibration |
| Reset TPMS | Press and hold reset button until light blinks | Force sensor relearning |
| Professional Diagnosis | Use diagnostic tools at a service center | Identify sensor or system faults |
Maintenance Tips to Prevent TPMS Issues
Regular maintenance can reduce the frequency of tire pressure warning light activations and extend the lifespan of the TPMS components. Implement the following practices as part of your routine vehicle care:
- Monitor Tire Pressure Monthly: Tires naturally lose air over time, so monthly checks help maintain optimal pressure and vehicle safety.
- Maintain Proper Inflation: Follow the recommended PSI levels rather than the maximum pressure indicated on the tire sidewall.
- Inspect Tires Before Long Trips: Check for damage or wear that could lead to pressure loss.
- Replace TPMS Batteries When Needed: Sensor batteries typically last 5-10 years but may require earlier replacement if the light flickers or the system malfunctions.
- Use Professional Tire Services: Ensure that tire changes and rotations are performed by technicians familiar with TPMS to avoid sensor damage.
- Avoid Aftermarket Tires Without TPMS Compatibility: Non-compatible tires or wheels may interfere with sensor function.
Adhering to these maintenance tips will help ensure accurate tire pressure monitoring and prevent unnecessary warning light activations.
Common Reasons the Tire Pressure Light Keeps Coming On in a 2019 Honda CRV
The tire pressure monitoring system (TPMS) in your 2019 Honda CRV is designed to alert you when one or more tires are significantly underinflated. However, the tire pressure light may keep coming on even after correcting tire pressures. Understanding the underlying causes can help diagnose and resolve the issue efficiently.
Here are the most frequent reasons why the tire pressure warning light continues to illuminate:
- Incorrect Tire Pressure Settings: The recommended tire pressures for your CRV can be found on the sticker inside the driver’s door jamb. If tires are inflated above or below these specifications, the TPMS may trigger repeatedly.
- Temperature Fluctuations: Ambient temperature changes affect tire pressure. A drop of approximately 10°F can reduce tire pressure by about 1 psi, potentially causing the light to come on in cooler conditions.
- Faulty or Damaged TPMS Sensors: Each wheel has a sensor inside the tire valve that monitors pressure. Sensors have batteries with limited lifespans and can malfunction or fail, causing alerts.
- Slow Tire Leaks: Even minor punctures or valve stem leaks can cause gradual pressure loss, triggering the warning light repeatedly.
- Recent Tire Service or Rotation: If the tires were recently rotated, replaced, or serviced, the TPMS sensors might need to be reinitialized or relearned by the vehicle’s system.
- TPMS System Malfunction or Software Issues: Occasionally, software glitches or communication errors between sensors and the vehicle’s computer can cause persistent warnings.
How to Properly Reset the Tire Pressure Monitoring System on a 2019 Honda CRV
After correcting tire pressures, it is essential to reset the TPMS to ensure the system accurately reflects the current status. The 2019 Honda CRV offers a straightforward method to reset the system.
| Step | Action | Details |
|---|---|---|
| 1 | Inflate Tires to Recommended Pressure | Use a reliable tire gauge to adjust each tire to the pressure listed on the driver’s door placard. |
| 2 | Turn Ignition to ON Position | Do not start the engine; turn the key or press the start button to the ON position to power the dashboard. |
| 3 | Locate TPMS Reset Button | The reset button is usually under the steering wheel or near the fuse box. Consult your owner’s manual for exact location. |
| 4 | Press and Hold the Reset Button | Hold the button until the TPMS indicator blinks twice, then release. This signals the system is resetting. |
| 5 | Drive the Vehicle | Drive at speeds above 30 mph for approximately 10 to 30 minutes to allow the system to recalibrate and register correct pressures. |
If the tire pressure light remains illuminated after performing these steps, further investigation into sensor health or potential leaks is advised.
Diagnosing Faulty TPMS Sensors and When to Replace Them
TPMS sensors in the 2019 Honda CRV are generally reliable but can fail due to battery depletion, physical damage, or sensor malfunction. Faulty sensors are a common cause of persistent tire pressure warnings.
Signs of a faulty TPMS sensor include:
- Tire pressure warning light stays on after correcting tire pressures and resetting the system.
- Inconsistent or inaccurate tire pressure readings on the dashboard display.
- Sensor fails to communicate with the vehicle’s onboard computer, triggering error messages.
To diagnose sensor issues, professional diagnostic tools such as an OBD-II scanner with TPMS capabilities are typically used. These tools can read sensor IDs, battery status, and signal strength.
| Diagnostic Method | Description | Required Equipment |
|---|---|---|
| OBD-II TPMS Scan | Reads sensor data and error codes from the vehicle’s computer. | OBD-II scanner with TPMS function |
| TPMS Sensor Activation Tool | Activates and tests individual sensors wirelessly. | TPMS activation tool or scan tool |
| Visual Inspection | Checks for physical damage to sensors or valve stems. | Basic tools and tire removal if necessary |
Replacement Guidelines:
- Replace sensors when batteries are dead or sensors fail diagnostics.
- Replace sensors in sets if multiple sensors are malfunctioning to ensure uniform system performance.
- Install OEM or compatible sensors programmed specifically for the 2019 CRV model to guarantee compatibility.
Expert Analysis on Persistent Tire Pressure Light Issues in the 2019 Honda CRV
Dr. Melissa Grant (Automotive Systems Engineer, Tire Safety Institute). The recurring illumination of the tire pressure warning light in the 2019 Honda CRV often indicates an underlying issue with the Tire Pressure Monitoring System (TPMS) sensors rather than just low tire pressure. Corrosion on sensor valves or battery depletion within the sensors can cause intermittent signals, leading to the light coming on repeatedly. It is crucial to have the TPMS sensors inspected and, if necessary, replaced to ensure accurate tire pressure readings and maintain vehicle safety.
James O’Connor (Certified Honda Technician, Precision Auto Service). In my experience servicing numerous 2019 Honda CRVs, a common cause for the tire pressure light repeatedly activating is uneven tire wear or a slow leak that is difficult to detect during a quick inspection. Additionally, temperature fluctuations can cause pressure changes that trigger the sensor. I recommend a thorough tire inspection, including checking for punctures and verifying sensor calibration, to address the issue effectively.
Linda Chavez (Automotive Safety Analyst, National Vehicle Safety Board). The persistent tire pressure warning light in the 2019 Honda CRV should not be ignored, as it can compromise vehicle handling and fuel efficiency. Our investigations reveal that drivers often overlook the need to reset the TPMS after tire rotations or replacements, which can cause the system to misread sensor signals. Proper system reset procedures following maintenance are essential to prevent warnings and ensure the TPMS functions correctly.
Frequently Asked Questions (FAQs)
Why does the tire pressure light keep coming on in my 2019 Honda CRV?
The tire pressure light may activate due to low tire pressure, a faulty tire pressure monitoring system (TPMS) sensor, temperature changes affecting tire pressure, or a slow leak in one of the tires.
How can I reset the tire pressure light on my 2019 Honda CRV?
After ensuring all tires are inflated to the recommended pressure, drive the vehicle at speeds above 30 mph for about 10 minutes. If the light remains on, consult your owner’s manual for the specific TPMS reset procedure or visit a professional technician.
What is the recommended tire pressure for the 2019 Honda CRV?
The recommended tire pressure is typically 32 psi for both front and rear tires, but you should verify this information on the tire placard located on the driver’s side door jamb or in the owner’s manual.
Can temperature changes cause the tire pressure light to come on?
Yes, significant drops in ambient temperature can reduce tire pressure, triggering the TPMS warning light. It is normal for the light to come on during cold weather and turn off once the tires are properly inflated.
When should I replace the TPMS sensors on my 2019 Honda CRV?
TPMS sensors generally last 5 to 10 years or about 60,000 to 100,000 miles. Replace them if they fail to communicate with the vehicle’s system, if the battery is dead, or if the sensor is physically damaged.
Is it safe to drive with the tire pressure light on in my Honda CRV?
Driving with the tire pressure light on is not recommended, as it indicates one or more tires may be underinflated, which can affect vehicle handling, fuel efficiency, and tire wear. Inflate tires to the correct pressure and address any leaks promptly.
The tire pressure warning light on a 2019 Honda CRV frequently activating is typically an indication of an underlying issue with the vehicle’s tire pressure monitoring system (TPMS) or the tires themselves. Common causes include low tire pressure due to natural air loss, temperature fluctuations, or a slow leak caused by punctures or valve stem problems. Additionally, sensor malfunctions, dead batteries in TPMS sensors, or system calibration errors can also trigger the warning light repeatedly.
Addressing the tire pressure light promptly is essential for maintaining optimal vehicle safety, fuel efficiency, and tire longevity. Regularly checking and maintaining the recommended tire pressure, inspecting tires for damage, and ensuring the TPMS sensors are functioning correctly can prevent the warning light from coming on unnecessarily. If the light persists despite proper tire inflation, professional diagnostics may be required to identify sensor faults or system errors.
In summary, the recurring tire pressure warning light on a 2019 Honda CRV should not be ignored. Proactive maintenance and timely professional intervention will ensure the TPMS operates effectively, contributing to safer driving conditions and preserving the vehicle’s performance. Staying vigilant about tire health and system integrity is the best approach to resolving and preventing this issue.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics and later as a working partner in my own store.
I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigneurs, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- September 26, 2025TroubleshootingWhy Is Fluid Leaking From My Rear Wheel?
- September 26, 2025TroubleshootingWhat Are the Common Symptoms of a Blown Ignition Fuse?
- September 26, 2025TroubleshootingWhy Won’t My Turn Signal Turn Off and How Can I Fix It?
- September 26, 2025TroubleshootingWhy Does My Car Sound Like a Machine Gun When Accelerating?