What Is the Proper 2017 WRX Lug Nut Torque?
The 2017 Subaru WRX is a performance vehicle that requires a specific lug nut torque to ensure the wheel is properly secured to the car. The manufacturer recommends a torque of 93 ft-lbs (127.1 Nm) for all wheel lug nuts on the 2017 WRX. This torque level should be used for all wheel sizes and any type of aftermarket wheels. It is important to use a quality torque wrench and use the correct pattern when tightening the lug nuts to ensure proper seating. Improperly torqued lug nuts can cause excessive vibration, premature tire wear, or even wheel detachment while driving.
Automobile – 2017 WRX Lug Nut Torque
Tire Size
The 2017 Subaru WRX is equipped with 225/45R17 tires. This size provides excellent performance and handling in all conditions. The tire size is also compatible with most aftermarket wheels, allowing for further customization of the vehicle.
Wheel Material
The wheels used on the 2017 WRX are made from high-strength aluminum alloy. This material provides strength and durability, while still remaining lightweight and relatively inexpensive. The aluminum alloy also provides superior corrosion resistance, making it ideal for use in all weather conditions.
Lug Nut Torque Specifications
For optimum performance and safety, the lug nut torque specifications for the 2017 Subaru WRX must be followed. The recommended torque specification for the front and rear lug nuts is 86 lb-ft (115 Nm). To ensure proper tightening of the lug nuts, a torque wrench should be used to obtain accurate results.
How to Properly Tighten Lug Nuts on a 2017 Subaru WRX?
When tightening lug nuts on a 2017 Subaru WRX, it is important to follow the manufacturer’s recommended steps to ensure proper installation and prevent any damage to the vehicle or its components. The following steps should be followed when tightening the lug nuts:
- Steps for Tightening Lug Nuts:
1. Place a jack stand under each side of the vehicle, ensuring adequate support before beginning work.
2. Apply lubricant such as anti-seize compound or penetrating oil to each of the threads on each lug nut prior to installation.
3. Place a new wheel onto each hub assembly and thread on each lug nut finger tight before using a torque wrench to tighten them completely according to the manufacturer’s specifications (86 lb-ft).
4. Using a star pattern when tightening (alternating between adjacent lugs) will help ensure even tension across all lugs and prevent warping or other damage to either wheel or hub assembly due to unequal stress distribution during installation process.
- Tools Needed:
In order to properly install new wheels on a 2017 Subaru WRX, you will need a jack stand set, lubricant such as anti-seize compound or penetrating oil, socket set with appropriate sockets for your type of wheel lugs, torque wrench capable of measuring 86 lb-ft (115 Nm), and possibly an impact wrench depending on your type of wheel lugs if manual tightening is not possible due to their design or other factors such as rust buildup etc..
2017 WRX Lug Nut Torque
Tightening lug nuts on a 2017 Subaru WRX is an important part of proper car maintenance. The torque rating for the lug nuts is 89 lb-ft (121 N-m). Over-tightening the lug nuts can cause damage, while under-tightening can lead to wheel imbalance and could be dangerous. It is important to use the correct torque rating when tightening the lug nuts on a 2017 Subaru WRX.
Tools Needed To Tighten Lug Nuts On a 2017 Subaru WRX
The tools needed to properly tighten the lug nuts on a 2017 Subaru WRX are a torque wrench, socket set, and possibly an impact gun. A torque wrench and socket set are necessary for ensuring that the lug nuts are tightened to the correct torque rating. An impact gun may be necessary if any of the lug nuts are very tight or if they have been over-tightened in the past.
Safety Precautions When Tightening Lug Nuts On a 2017 Subaru WRX
When tightening the lug nuts on a 2017 Subaru WRX, it is important to take safety precautions. First, make sure that all of the other wheels are chocked securely before beginning any work. This will prevent the car from moving while you are working on it. Next, make sure that your workspace is clear and free of any debris or obstructions that could cause injury or damage to parts of your car or yourself during work. Finally, it is always wise to wear protective gear such as gloves and safety glasses when working with tools and machinery such as this.
Benefits of Properly Tightening Lug Nuts On a 2017 Subaru WRX
There are many benefits to properly tightening your lug nuts on a 2017 Subaru WRX. Most importantly, properly tightened lug nuts ensure that your wheels remain securely attached to your vehicle which leads to improved handling and increased safety when driving at high speeds or in hazardous conditions. Additionally, correctly tightened lug nuts will reduce wear and tear on both your wheels and tires as they will not be loosened by vibrations while driving which can lead to premature damage over time.
What Type Of Lug Nuts Are Used On A 2017 Subaru WRX?
The type of lug nut used on a 2017 Subaru WRX depends on what type of wheel you have installed but most commonly they come with 12mm x 1.25 thread pitch conical seat steel lugs with an outer diameter of 21mm (0.83 inches). It is also recommended that you use anti-seize lubricant when installing aftermarket wheels as this helps protect against corrosion which can cause loosening over time due to vibrations from driving at high speeds or poor road conditions.
FAQ & Answers
Q: What is the 2017 Subaru WRX lug nut torque?
A: The 2017 Subaru WRX uses a torque of 89 ft-lbs (120 Nm), and lug nuts should be tightened in a crisscross pattern.
Q: What type of lug nuts does the 2017 Subaru WRX use?
A: The 2017 Subaru WRX uses 12mm x 1.25mm lug nuts with a 60° conical seat.
Q: What tools are needed to properly tighten the lug nuts on the 2017 Subaru WRX?
A: A torque wrench and socket that fits the size of the lug nut is needed to properly tighten the lug nuts on the 2017 Subaru WRX.
Q: What safety precautions should be taken when tightening the lug nuts on a 2017 Subaru WRX?
A: When tightening the lug nuts on a 2017 Subaru WRX, it is important to make sure that they are not over-tightened, as this could cause damage to both the wheel and tire. It is also important to take care when placing jack stands and other equipment around your vehicle while working on it.
Q: What are some benefits of properly tightening the lug nuts on a 2017 Subaru WRX?
A: Properly tightening the lug nuts on a 2017 Subaru WRX will ensure that your wheels remain secure while driving, improving handling and reducing wear and tear of your wheels and tires. It will also help improve safety by preventing any loose or potentially dangerous wheel components from coming off while driving.
In conclusion, the 2017 WRX lug nut torque is an important factor to consider when servicing your vehicle. Properly torquing the lug nuts ensures that the wheels are securely fastened to the car, protecting both you and your car from potential accidents or damage. If you are unsure of the correct torque setting, it is recommended to refer to a qualified mechanic or dealer for assistance in order to ensure that your car is serviced correctly.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.
As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- July 26, 2023BodyFind the Best Grill for Your 2007 Toyota Tacoma – A Complete Guide
- July 26, 2023BodyUpgrade Your Ford Escape with the Best 2008 Grill – Here’s How!
- July 26, 2023Bumper Stickers, Decals And MagnetsBest Chevy 1500 Door Emblem: Upgrade Your Truck with a Stylish Emblem
- July 26, 2023Marker Light AssembliesGive Your 2008 Dodge Dakota a Makeover with the Best Grill Upgrade