2013 Honda CR-V 100,000 Mile Service: What to Expect

The 2013 Honda CR-V 100,000 mile service is a comprehensive maintenance package designed to ensure that your vehicle continues to perform at its best. The service includes an oil change, oil filter replacement, tire rotation and inspection of brakes, suspension components and hoses. All fluids will be checked and topped off as needed. The air filter will be replaced if necessary. Any necessary adjustments or repairs will be performed and all parts will be inspected for wear and tear. Finally, a thorough diagnostic test will be conducted to ensure the proper functioning of all systems. Completion of this service will help keep your Honda in peak condition for many more miles of driving pleasure.

Automobile: 2013 Honda CR-V 100,000 Mile Service

Check Engine Oil and Replace

It is important to check the engine oil in your Honda CR-V regularly, as well as change it when necessary. Engine oil lubricates the moving parts of your engine, which helps it function correctly. If the oil becomes dirty or too old, it will not be able to protect the engine from wear and tear, which can result in expensive repairs. To replace your engine oil, start by removing the oil filter and draining out the old oil. Then fill with fresh oil and replace the filter. Be sure to use the correct type of oil for your vehicle, as specified in the owner’s manual.

Replace Air Filter

Your vehicle’s air filter is responsible for removing dirt and debris from the air before it enters your engine. Over time this filter can become clogged with dirt and dust, reducing airflow and causing damage to your engine. It is important to replace this filter every 10,000 miles or as recommended in your owner’s manual. To replace the air filter on a Honda CR-V start by locating the air box under your hood (it will be located near the back of the engine). Remove the lid from this box and remove the old filter. Then install a new air filter into place and close up the box.

Check and Replace Wiper Blades

The wipers on a Honda CR-V are responsible for keeping your windshield clean during inclement weather conditions such as rain or snowstorms. Over time these blades can become worn or damaged due to exposure to sunlight or debris on roads. It is important to inspect these blades regularly and replace them when needed. To do so you will need a new set of wiper blades that are designed specifically for a Honda CR-V – consult with an automotive parts store if you have any questions about which ones are best for you vehicle. Then raise each wiper arm off of its resting point on your windshield and slide off each old blade – then slide on each new blade until it clicks into place on its arm rest point.

Examine Tire Tread and Pressure

Your tires play an essential role in keeping you safe while driving – they provide traction that helps keep you going in a straight line while braking or turning corners safely. As such it is important to examine their treads regularly (as well as making sure they have proper inflation). To check treads start by examining each tire’s sidewall – there should be raised ridges known as “treadwear indicators” that let you know when they are too worn down (replace them if they look significantly lower than other treads). For inflation use a tire pressure gauge (available at any auto shop) to make sure that all tires have enough pressure – this should be around 30 PSI for a Honda CR-V (consult with an automotive parts store if you have any questions about this).

Examine Brake Pads

Your brake pads play an essential role in keeping you safe while driving by providing friction between your brake rotors/drums and wheels when stopping/slowing down quickly – without them your car would not be able to stop efficiently! As such it is important to examine these pads regularly so that they don’t become too worn down or damaged, leading to expensive repairs later on down the road! To check brake pads start by inspecting their surface area – if there appears to be any cracks or signs of wear then they will need replacing right away! Additionally use a small mirror or flashlight underneath each pad so that you can see how much material remains inside them (if there is less than 1/4 inch left then they also need replacing!).

Check Coolant Levels And Condition

The coolant system within a Honda CR-V plays an essential role in keeping its engine temperature regulated during peak performance conditions – without enough coolant flowing through its system then serious damage may occur! As such it is important to inspect both levels & condition of coolant at least once per month (more often if possible), especially during hotter months when temperatures rise quickly! Start by checking levels using either a dipstick or plastic measuring cup depending on what kind of reservoir tank is fitted within your car – fill up with coolant if needed & monitor condition using either sight inspection or an electronic diagnostic tool such as an OBD scanner – replace & flush system if necessary!

Inspect Hoses, Belts And Wiring Harness

Hoses within a Honda CR-V are responsible for transporting various liquids throughout its system including fuel, coolant & hydraulic fluid – without them certain components won’t be able operate correctly! As such it is important inspect these hoses regularly for signs of wear & tear including cracking, bulging/splitting & discoloration – replace any suspect hoses immediately before further damage occurs! Belts also need inspecting once per month for signs of fraying/cracking – tensioners should also be inspected at same time using either sight inspection or special tools available from most auto stores! Lastly wiring harnesses should be checked twice per year using an OBD scanner – look out for broken wires & corroded connectors which could lead short circuits & other electrical faults!

Clean Battery Terminals And Posts

The battery within a Honda CR-V provides energy not only when starting but also throughout various operating systems including lights & electronics – having properly maintained battery terminals ensures maximum performance throughout life span! Start by cleaning both terminals & posts using either terminal brush kit available from most auto stores or simply mix baking soda solution together with water until thick paste forms before spreading over affected areas – use wire brush/toothbrush scrub away corrosion build up before rinsing off before reassembling everything back together again afterwards!

100 000 Mile Service For Honda Cr V

When reaching 100 000 miles service interval within your Honda CR-V several key maintenance procedures need carrying out including changing engine oil & replacing filters plus rotating tires where necessary along with inspecting front end components among others – this will ensure optimal performance throughout lifespan whilst avoiding expensive repairs down road thanks regular maintenance checks being carried out every now then! Start by changing engine oil & replacing filters followed by rotating tires where needed along side checking brake system plus steering system afterwards ensuring all components remain functional during journey ahead!.

Regular maintenance checks carried out on vehicles offer numerous advantages not just limited increased lifespan but also improved safety features amongst others – thanks modern diagnostic tools used today more precise inspections can take place detecting even minor issues before turning into major problems later down line saving large amounts money eventually spent repairing faulty components otherwise left unnoticed over period time had regular checks been avoided altogether!.

Honda Cr V Maintenance Tips
When carrying out regular maintenance checks upon vehicle some tips worth following order get best results include checking headlights making sure functioning correctly plus examining brakes pads ensuring plenty material present inside avoiding replacement costs along side inspecting battery terminals posts cleaning away corrosion build prior reassembling everything back again afterwards!.

Tools Needed For Maintenance On A Honda Cr V
To carry out regular maintenance checks upon vehicle some tools required include wire brush toothbrush used clean battery terminals posts corrosion build up baking soda mixture mixed water until thick paste forms spread over affected areas terminal brush kit available most auto stores OBD scanner detect broken wires corroded connectors short circuits other electrical faults finally special tire pressure gauge used measure inflation level around 30 PSI specific get job done successfully!.


The 2013 Honda CR-V is a popular crossover SUV that has been around since 1995 and continues to be one of the most preferred vehicles for families. It is reliable, affordable, and performs well in all kinds of terrain. Unfortunately, as with any vehicle, it requires routine maintenance to stay in top condition. The 100,000-mile service is an important milestone for any car, and the 2013 Honda CR-V is no exception. This article will cover all the necessary components that should be inspected and serviced at this milestone to keep your car running smoothly for years to come.

Oil Change

Getting an oil change at the 100,000-mile mark is essential for keeping your engine running efficiently and preventing costly repairs down the road. The oil should be changed using high-quality synthetic oil specifically designed for your vehicle’s engine. It is also important to check the oil filter during this service as well as any other filters needed such as air filters or fuel filters.

Fluid Level Inspection

The fluid levels in the engine should also be checked during a 100,000-mile service. This includes checking levels of coolant, brake fluid, transmission fluid, power steering fluid, and other essential fluids that keep your car functioning properly. It is important to make sure these levels are topped off if needed so that your vehicle does not overheat or suffer from other issues due to low fluid levels.

Brake Inspection

The brakes are one of the most important safety features on any vehicle and it is essential to have them inspected at the 100,000-mile mark. This includes checking brake pads for wear and tear as well as inspecting brake lines for any signs of leakage or damage. If there are any issues with the brakes they should be addressed immediately as they can lead to serious safety concerns if left unchecked.

Transmission Flush

A transmission flush is recommended at this milestone service in order to help keep your transmission functioning properly and prevent any potential problems down the road. A transmission flush involves draining old fluid from your vehicle’s transmission system and replacing it with new fluid which helps clean out dirt and debris that can build up over time causing damage to your car’s transmission system if left unchecked.

Tire Rotation & Alignment

It is also important to have your tires rotated and aligned every 100,000 miles in order to maintain even tire wear which helps extend their life span while improving performance on all types of terrain. During this process a technician will rotate all four tires around each other while also adjusting them so they are parallel with each other which helps ensure proper alignment when driving down rough roads or through potholes which can cause uneven wear otherwise if left unchecked for long periods of time.


Overall getting a 100,000 mile service on your 2013 Honda CR-V is essential for keeping it running smoothly while avoiding costly repairs down the road due to neglecting routine maintenance tasks such as getting an oil change or inspecting vital components such as brakes lines or transmissions systems which could lead to serious safety concerns if left unchecked for too long of a period of time so make sure you take care of it today!

FAQ & Answers

Q: What are the maintenance requirements for a 2013 Honda CR-V?
A: The maintenance requirements for a 2013 Honda CR-V include changing the engine oil and filter, replacing the air filter, checking and replacing wiper blades, examining tire tread and pressure, examining brake pads, checking coolant levels and condition, inspecting hoses, belts, and wiring harness, cleaning battery terminals and posts as well as rotating tires and balancing as needed.

Q: What is included in a 100,000 mile service for a Honda CR-V?
A: A 100,000 mile service for a Honda CR-V includes changing the engine oil and filter, rotating tires and balancing as needed, inspecting front end components, checking brake system and inspecting steering system.

Q: What are the advantages of regular maintenance on a Honda CR-V?
A: The advantages of regular maintenance on a Honda CR-V include extending its lifespan by preventing wear on engine components due to inadequate lubrication and maintaining peak performance so that it runs smoothly. Additionally, regular maintenance can help identify issues early on so that they can be fixed before they become more serious or lead to costly repairs.

Q: Are there any tips for maintaining a Honda CR-V?
A: Yes, there are several tips for maintaining a Honda CR-V such as regularly checking the oil level to ensure it is at the correct level; scheduling regular tune ups; checking fluids regularly; changing your air filter according to manufacturer’s recommendations; replacing spark plugs when necessary; cleaning battery terminals; inspecting hoses frequently; and having your brakes checked regularly.

Q: What tools are needed for Honda CR V maintenance?
A: The tools needed for Honda CR V maintenance include an oil filter wrench to remove old filters when changing engine oil; an OBD II scanner to diagnose any potential issues with on board systems; socket sets or wrenches to remove parts such as spark plugs or air filters; pliers or wire cutters to clean battery terminals or inspect wiring harnesses; jack stands or ramps to lift the vehicle safely when performing tire rotations or other tasks underneath the car. Additionally you will need basic hand tools such as screwdrivers and adjustable wrenches.

In conclusion, the 2013 Honda CR-V 100,000 mile service is a great way to keep your car running smoothly and safely. It provides regular inspections, oil and filter changes, tire rotations, and other services to keep your car in top shape. This service is an important part of owning a car, and it can help you save money on future repairs. Taking advantage of the Honda CR-V 100,000 mile service will ensure that you get the most out of your vehicle for many miles to come.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts