How Much Does it Cost to Replace Subaru Wheel Studs?

AvatarByCarl Frisch

Subaru wheel stud replacement cost refers to the cost of replacing the wheel studs of a Subaru vehicle. Wheel studs are threaded bolts that attach the wheels to the vehicle’s hub. They are necessary for ensuring proper wheel alignment and safety when driving your Subaru. Replacing these can be expensive, but it is important to ensure that your vehicle is properly maintained and safe on the road. The cost of replacing a wheel stud can vary depending on the make, model, and year of your Subaru as well as where you live. Generally, however, you can expect to pay between $45 and $90 for each wheel stud. This cost may also include additional labor charges if the job requires more than just changing out one or two bolts.

Automobile: Subaru Wheel Stud Replacement Cost

What Are Wheel Studs?

Wheel studs are threaded bolts that attach the wheel to the vehicle’s hub assembly. They are typically made of hardened steel and are designed to secure the wheel in place. The studs also provide a point of contact for the wheel to be attached to the hub when the lug nuts are tightened. For most vehicles, there will be several wheel studs located around each wheel, creating a secure connection between both components.

Why Are Wheel Studs Important?

Wheel studs are important because they provide a secure connection between the wheels and the hub assembly, allowing for safe and efficient operation of your vehicle. Without them, there would be no way for your wheels to be attached to your car, leading to dangerous conditions while driving. Additionally, they help keep your wheels aligned with each other and keep them from slipping off while driving on uneven terrain or during sharp turns.

Common Causes of Wheel Stud Damage

Poor quality parts can cause damage to your wheel studs over time. If you have installed parts that were not designed specifically for your vehicle or were of poor quality, they may cause excessive wear on the threads or become loose over time. Similarly, if you have tightened your lug nuts too much or too frequently it can lead to damage as well. Poor installation practices such as using an air impact wrench instead of a torque wrench can also contribute to damaged or failing wheel studs.

Symptoms of Damaged or Failed Wheel Studs

If you have damaged or failed wheel studs you may experience vibrations and shaking while driving at certain speeds, as well as excessive road noise as air is forced through any gaps caused by worn out threads. You may also notice that it takes more effort when tightening your lug nuts than it should due to any thread damage on the wheel studs.

Subaru Models That Require Wheel Stud Replacement

Subaru models such as Impreza Series and Forester Series require regular replacement of their wheel studs due to their specific design requirements and continual use in various conditions such as off-roading or high speed driving on highways. It is important to check with your local service center before attempting any repairs on these models so that you know exactly what parts need replacing and how long they should last before needing another replacement.

Cost Of Replacing A Subaru Wheel Stud

The cost of replacing a Subaru wheel stud will vary depending on where you take it for repair and what type of part needs replacing. Labor costs will typically range from $50-$100 depending on how long it takes the mechanic to replace all necessary components but this could increase if additional parts need replacing due to extensive damage from wear and tear over time. Parts prices will depend on whether OEM (original equipment manufacturer) parts are used or aftermarket replacements but typically range from $10-$50 per part needed for replacement.

Replacing Subaru Wheel Studs

Subaru vehicles are known for their durability and reliability, but they are not immune to wear and tear. Oftentimes, the wheel studs on a Subaru will need to be replaced in order to keep the vehicle running smoothly. Replacing the wheel studs can be done either with DIY methods or by seeking professional services. This article will explain the benefits and procedures of both options so that you can make an informed decision about how to replace your Subaru’s wheel studs.

DIY Methods for Replacing Subaru Wheel Studs

For those who want to replace their Subaru’s wheel studs on their own, there are a few steps that must be followed. First, it is important to have the proper tools available. A torque wrench and a set of sockets will be needed in order to remove and install the new wheel studs correctly.

Next, it is time to begin the removal process. This involves loosening the lug nuts of the wheels before jacking up the car and then removing them completely. Once this is done, you can begin removing each of the old wheel studs one at a time using a socket wrench and then replacing them with new ones. Finally, it is important to make sure that all of the lug nuts are tightened correctly with a torque wrench before lowering your car back down onto its wheels.

Professional Services for Replacing Subaru Wheel Studs

If DIY methods do not sound appealing or feasible, there are plenty of professional services available for replacing your Subaru’s wheel studs as well. Certified mechanics or mobile mechanics can come directly to your location in order to provide this service quickly and efficiently. Additionally, they will often use quality parts and products when carrying out any repairs or replacements which could help extend the lifespan of these parts even further.

Benefits of Professional Services for Replacing Subaru Wheel Studs

As mentioned above, there are many benefits associated with seeking professional services for replacing your Subaru’s wheel studs compared to attempting it yourself at home using DIY methods. These services can offer quality parts and products which could potentially last longer than those purchased at an auto shop or online store would offer. Additionally, they typically provide timely and efficient service which could save you time in comparison to doing it yourself at home – especially if you have limited mechanical experience or knowledge about how these parts work together as part of an overall system within your car’s design.

FAQ & Answers

Q: What Are Wheel Studs?
A: Wheel studs are cylindrical pieces of metal that attach the wheel of a vehicle to its hub. They are typically made of hardened steel and have a threaded end that is secured to the axle hub with a lug nut. The other end is inserted into the wheel and held in place by the lug nut.

Q: Why Are Wheel Studs Important?
A: Wheel studs are an important part of a vehicle’s suspension system as they help to secure the wheel to the axle and ensure that it remains firmly attached when driving. They also help to reduce vibrations from the road, which can cause wear and tear on other parts of the car.

Q: What Are Common Causes Of Wheel Stud Damage?
A: Common causes of wheel stud damage include poor quality parts and poor installation practices. Poor quality parts can cause premature wear, while improper installation can lead to loose or cross-threaded nuts, which can cause damage over time.

Q: What Are Symptoms Of Damaged Or Failed Wheel Studs?
A: Symptoms of damaged or failed wheel studs include vibrations and shaking while driving, excessive road noise, and difficulty removing or replacing wheels. If you experience any of these symptoms, it’s important to have your vehicle inspected by a qualified mechanic as soon as possible.

Q: What Is The Cost Of Replacing A Subaru Wheel Stud?
A: The cost of replacing a Subaru wheel stud will depend on several factors including labor costs, parts prices, and any additional services required. On average, labor costs for replacing a Subaru wheel stud range from $50-$150 depending on location and mechanic rates. Parts prices will vary depending on model but typically range from $10-$50 per part.

In conclusion, the cost of replacing Subaru wheel studs can vary greatly depending on the type of studs and the labor involved. Depending on the make and model of your Subaru, you may be able to replace your wheel studs yourself or have a professional do it. In either case, it is important to ensure that a quality part is used to ensure a safe ride. Ultimately, it is important to consider all aspects of the replacement when deciding whether or not to replace your Subaru wheel studs.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts