Subaru Front Wheel Bearing Replacement Cost – What You Need to Know
Subaru Front Wheel Bearing Replacement Cost is the amount of money needed to replace the front wheel bearing in a Subaru vehicle. This cost is dependent on the specific model of the Subaru vehicle and may vary depending on the labor costs, parts availability, and any additional repairs needed. Generally, wheel bearing replacement for a Subaru will range from $250-$450 for labor and parts combined. In some cases, additional repair work may be necessary such as replacing brakes or suspension components which can increase the overall cost. It is important to ensure that all necessary repairs are completed in order to ensure optimal performance and safety of your vehicle.
Subaru Front Wheel Bearing Replacement
Replacing the front wheel bearing on your Subaru is a relatively straightforward process with some basic tools. The front wheel bearing helps to reduce friction, enabling your car to move smoothly and safely. It is important to replace your front wheel bearings as soon as you start noticing signs of wear and tear. These signs can include a noisy or grinding sound coming from the wheels, increased vibration when driving, or uneven tire wear.
Replacement Parts
When replacing your Subaru’s front wheel bearings, you have two options: Original Equipment Manufacturer (OEM) parts or aftermarket parts. OEM parts are made by the same manufacturer as the original part, and they are designed to fit perfectly and last longer than aftermarket parts. Aftermarket parts are not made by the original manufacturer, but they generally come at a lower cost.
Repair Shops and Services
When it comes to replacing your Subaru’s front wheel bearings, there are three main options: dealerships, independent repair shops, and mobile repair services. Dealerships will often have access to original equipment manufacturer (OEM) parts and can provide expertise in servicing Subarus specifically; however, this option tends to be more expensive than independent repair shops or mobile services. Independent repair shops can usually provide a cheaper option for replacing front wheel bearings on Subarus; however, they may not always have access to OEM parts. Finally, mobile repair services offer convenience as they come directly to you; however, their rates may be higher than other options depending on location and service type.
Subaru Front Wheel Bearing Replacement Cost Estimates
The cost of replacing your Subaru’s front wheel bearings will depend on several factors such as labor costs and the type of replacement part used. Labor costs can vary widely depending on where you take your car for service; however, an average labor hour for a Subaru bearing replacement is around 2 hours. The cost of replacement parts also varies depending on whether you choose OEM or aftermarket parts; OEM components tend to be more expensive but last longer while aftermarket components tend to be cheaper but may need more frequent replacements in the future. It is always advisable to shop around for the best price when it comes to both labor costs and replacement parts in order to get the best value for money possible when replacing your Subaru’s front wheel bearings.
Preparation for Subaru Front Wheel Bearing Replacement
Before beginning work on replacing your Subaru’s front wheel bearings it is important that you take some time preparing properly first so that everything goes smoothly on the day of service. This preparation should include researching which replacement part would be best suited for your vehicle (OEM or aftermarket), gathering necessary tools such as jack stands and wrenches, double-checking that any necessary fluids have been replaced beforehand (e.g brake fluid), confirming that all lug nuts are properly tightened before lifting up the car with a jack stand, ensuring that no loose objects are in the way prior to lifting up the car with a jack stand (e.g rocks or stones), wearing safety glasses throughout all work being done under the car being serviced etcetera . Ultimately taking these steps before beginning work will help make sure that everything runs smoothly during service and that no unnecessary damage occurs during work being done under the car being serviced .
Automobile: Subaru Front Wheel Bearing Replacement Cost
Replacing the front wheel bearings on a Subaru is a common repair that can be done at home, with the right tools and safety gear. DIY replacement can save you money, but it’s important to understand the process and common mistakes to avoid. Professional services provide accurate diagnosis and expertise in repair, so there are advantages to seeking professional service as well.
Tools Needed for the Job
Before beginning the repair, it’s important to have all of the tools and supplies needed for the job. Generally, you will need a jack and stands, jack points, lug wrench or breaker bar, torque wrench, impact gun or socket wrench set, lock nut tool or adjustable wrench, bearing press tool or bearing puller set, wheel bearing grease and replacement bearings. You should also have safety gear including safety glasses and gloves.
Vehicle Preparation Tips
Before beginning any repair work on your vehicle, it’s important to ensure that it is properly prepared for the job. This includes checking all of your tools and supplies before starting as well as making sure that you have an adequate workspace with good visibility. Additionally, you should block off any area around your vehicle in case of an emergency stop during the repair process.
DIY Subaru Front Wheel Bearing Replacement Process
The step-by-step instructions for replacing front wheel bearings on a Subaru is fairly straightforward when done correctly:
• Lifting the Vehicle – First you must safely lift your vehicle using a jack and stands. Make sure to use appropriate jack points when lifting your car so that you don’t damage anything underneath.
• Removing the Old Bearings – Once your car is securely lifted off of the ground, remove the wheels so that you can access the wheel bearings by removing their retaining clips. Then use a bearing press tool or bearing puller set to carefully remove them from their housing without damaging them further.
• Installing New Bearings – After cleaning out any debris from around where the old bearings were removed from their housings, apply fresh grease to them before inserting them back into place. Use either an impact gun or socket wrench set to secure them in place with new retaining clips before putting your wheels back on securely with a torque wrench set to manufacturer’s specifications..
Common Mistakes to Avoid During DIY Replacements
When performing DIY repairs on vehicles like Subarus it’s important to pay attention to detail in order to avoid common mistakes such as over-tightening bolts or not lubricating replacement parts adequately beforehand. Additionally, always make sure that all tools are properly calibrated before every use in order to ensure accuracy during repairs as well as avoiding potential injury due to improper tightening techniques.
Professional Subaru Front Wheel Bearing Replacement Service
Although DIY repairs can be done safely at home with proper preparation and understanding of techniques involved in completing such repairs correctly; professional services offer advantages such as accurate diagnosis of issues causing wear on wheel bearings as well as expertise in repairing those issues correctly without damaging other components of your vehicle during repair process. Professional services also often come with warranties so if there are any problems after service has been completed they can be addressed quickly without having any additional costs associated with resolving those issues yourself at home afterwards..
FAQ & Answers
Q: What is Front Wheel Bearing Replacement?
A: Front wheel bearing replacement is a type of car repair that involves removing and replacing the bearings that are located in the front wheels of a vehicle. The purpose of these bearings is to reduce friction and noise while driving, and they also help to improve steering stability.
Q: What are the Signs of Wear and Tear on a Front Wheel Bearing?
A: Signs of wear and tear on a front wheel bearing can include increased noise from the wheels, vibration when braking, or an uneven feeling when driving. If any of these signs are present, it may indicate that the front wheel bearings need to be replaced.
Q: What are the Different Replacement Options for Subaru Front Wheel Bearings?
A: There are two main options for replacing Subaru front wheel bearings – Original Equipment Manufacturer (OEM) parts and aftermarket parts. OEM parts are made by the original manufacturer, while aftermarket parts are made by third-party companies. Depending on your budget and needs, either option can be suitable for replacing your front wheel bearings.
Q: How Much Does Subaru Front Wheel Bearing Replacement Cost?
A: The cost of a Subaru front wheel bearing replacement will depend on factors such as labor costs, parts costs, and shop fees. On average, labor costs for this replacement range from $100-$200 per hour depending on location and complexity of job. Parts costs can range from $50-$150 depending on type, size, brand and quality. Additionally, shops may charge additional fees depending on the type of service provided.
Q: Is it Possible to Replace Subaru Front Wheel Bearings Yourself?
A: While it is possible to replace Subaru front wheel bearings yourself using DIY methods, this should only be attempted by experienced mechanics with knowledge in automotive repairs. It is important to have all necessary tools available before attempting this job as well as taking necessary safety precautions when working with vehicles.
In conclusion, Subaru front wheel bearing replacement cost is an important factor to consider when purchasing a new vehicle or replacing parts in an existing one. The cost of the front wheel bearing replacement can vary depending on the model and year of the vehicle, as well as the quality of the parts. It is important to research different brands and models to find the best value for money when replacing a front wheel bearing. Additionally, it is recommended to have a professional mechanic replace any worn or damaged bearings as they will have the necessary tools and knowledge required for a successful job.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.
As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- July 26, 2023BodyFind the Best Grill for Your 2007 Toyota Tacoma – A Complete Guide
- July 26, 2023BodyUpgrade Your Ford Escape with the Best 2008 Grill – Here’s How!
- July 26, 2023Bumper Stickers, Decals And MagnetsBest Chevy 1500 Door Emblem: Upgrade Your Truck with a Stylish Emblem
- July 26, 2023Marker Light AssembliesGive Your 2008 Dodge Dakota a Makeover with the Best Grill Upgrade