What is the Subaru Forester Rear Wheel Bearing Replacement Cost?

AvatarByCarl Frisch

The Subaru Forester is a popular compact SUV that has earned a reputation for being reliable and affordable. One of the most common repairs associated with the Forester is replacing the rear wheel bearing. The cost of replacing a rear wheel bearing on a Subaru Forester can range from $200-$400, depending on the complexity of the repair and the parts required. The labor cost can be anywhere from $100 to $150, depending on the mechanic and their experience level. It is important to note that this cost does not include any additional taxes or fees that may be associated with the repair. Additionally, it is important to make sure that any replacement parts are of good quality, as sub-par parts can lead to further issues down the road.

Definition

A rear wheel bearing is an essential part of a car’s suspension system. It is a metal device that connects the axle shaft to the wheel hub, allowing the wheel hub to rotate freely while keeping the axle shaft stable. The rear wheel bearings are responsible for supporting the weight of the car and providing stability while driving. Without them, your car would be unstable and prone to accidents.

How it Works

Rear wheel bearings are usually made up of two components: an inner race and an outer race. The inner race is mounted on the axle shaft and has grooves where small steel balls can roll between it and the outer race, which is mounted on the wheel hub assembly. As you drive, these steel balls roll along in their grooves and provide smooth motion for your wheels. This allows for a very efficient transfer of power from your engine to your wheels so you can get where you need to go safely.

Common Problems

When rear wheel bearings fail, they can cause several problems with your car’s performance such as vibration in the steering wheel, noises from the rear wheels, and increased fuel consumption due to friction between parts. Additionally, worn out bearings can lead to excessive wear on other suspension components such as shocks and struts which will also decrease your car’s performance and safety.

Subaru Forester Rear Wheel Bearing Replacement Cost

Replacing a rear wheel bearing on a Subaru Forester typically costs anywhere from $400 to $600 depending on labor costs in your area. It is important to note that this repair should only be done by a professional mechanic as improper installation could lead to more costly repairs down the line. Additionally, if you are replacing both rear bearings at once then expect to pay double or more for this repair job due to extra labor involved in replacing both parts at once.

Automobile – Subaru Forester Rear Wheel Bearing Replacement Cost

Having a reliable car is incredibly important for our day-to-day lives, and one of the most important components in our vehicles is the wheel bearing. A wheel bearing plays an essential role in keeping our wheels turning, and if it begins to wear out it can lead to potentially dangerous situations. In order to keep your vehicle running smoothly and prevent any accidents from occurring, it is important that you replace your rear wheel bearing when necessary.

The Subaru Forester is one of the most popular vehicles on the market, and its rear wheel bearing replacement cost can vary depending on the type of repair needed. It is always best practice to consult with a certified mechanic before undertaking any repairs on your vehicle. In this article, we will cover some of the reasons why you should consider replacing your rear wheel bearing in a Subaru Forester, as well as provide some DIY steps on how to do so.

Difficulty Turning At Low Speeds

One of the first warning signs that you may need to replace your rear wheel bearing in a Subaru Forester is difficulty turning at low speeds. This could be a sign that something is wrong with your vehicle’s suspension or steering system. If you experience difficulty turning at slower speeds, it may be time for you to replace your rear wheel bearing in order to ensure that everything is functioning properly.

Wear and Tear on Tires

Another warning sign that you may need to replace your rear wheel bearing in a Subaru Forester is excessive wear and tear on tires. When tires begin to wear unevenly or excessively, it could be an indication that something isn’t quite right with the suspension or steering system of the vehicle. As such, replacing the rear wheel bearing can help restore proper balance and alignment to ensure smooth operation of these components.

Why Should You Replace Your Rear Wheel Bearing?

It is important for drivers to understand why they should consider replacing their rear wheel bearings in a Subaru Forester when necessary. Not only does this help ensure safety on the roadways but it can also improve overall performance as well as increase fuel efficiency. Below are some of the key reasons why you should consider replacing your rear wheel bearings:

  • Safety Considerations: Replacing your rear wheel bearings helps promote safety by reducing potential risks associated with worn out components.
  • Impact On Vehicle Performance: Replacing worn out parts helps improve overall performance by improving steering response times.
  • Increased Fuel Efficiency: Replacing worn out parts can reduce drag which can ultimately lead to improved fuel efficiency.

DIY Steps for Replacing a Subaru Forester Rear Wheel Bearing

If you are interested in replacing your own rear wheel bearings in a Subaru Forester there are certain steps that must be followed in order to do so safely and correctly. Before beginning any type of repair process it is always best practice to consult with a certified mechanic first. Below are some DIY steps for replacing a Subaru Forester’s rear wheel bearings:

  • Disconnect Battery: Disconnecting battery power helps prevent any electric shocks.
  • Remove Tire: The tire must be removed from its position so that access may be granted for removal of other components.
  • Remove Hub Assembly: The hub assembly must then be carefully removed using appropriate tools such as wrenches or sockets.
  • Replace Rear Wheel Bearing:
    Once all components have been removed, remove old bearing and replace with new one using greased bolts.
    • < li >< strong >Install Hub Assembly & Tire : Carefully reinstall hub assembly onto axle hub flange being sure not over tighten bolts . After securing assembly , reinstall tire being sure not over tighten lug nuts . < li >< strong >Reconnect Battery : Reconnect battery power after all repairs have been completed .

    Following these simple steps will help ensure successful replacement of rear wheel bearings in a Subaru Forester . Be sure not take any shortcuts during process , ask qualified mechanic if unsure about procedure . Doing so will help ensure safety while driving , as well as improving vehicle performance .

    FAQ & Answers

    Q: What is a rear wheel bearing?
    A: A rear wheel bearing is a component of the wheel assembly that allows the wheels on your vehicle to rotate smoothly. The rear wheel bearing helps to reduce friction between the axle and the wheels, decreasing wear and tear on the tires.

    Q: What are common symptoms of a failing rear wheel bearing?
    A: Common symptoms of a failing rear wheel bearing include vibrations in the steering wheel, noises from the rear wheels when turning, difficulty turning at low speeds, and wear and tear on tires.

    Q: Why should I replace my rear wheel bearing?
    A: It is important to replace the rear wheel bearing because it impacts your safety while driving. A damaged or worn out bearing can cause your vehicle to become unstable while turning or braking. Additionally, replacing your rear wheel bearing can improve your car’s performance and fuel efficiency.

    Q: How much does it cost to replace a Subaru Forester rear wheel bearing?
    A: The cost of replacing a Subaru Forester’s rear wheel bearing depends on factors such as labor costs and parts availability. Generally speaking, it can cost anywhere from $150 – $1000 for parts alone, plus additional labor costs depending on where you take your vehicle for repair.

    Q: Is it possible to replace a Subaru Forester’s rear wheel bearing myself?
    A: Yes, depending on your level of mechanical experience, you may be able to replace the Subaru Forester’s rear wheel bearing yourself with basic tools and supplies. Before attempting any repairs yourself, make sure you consult a professional mechanic if you are unsure about any of the steps involved in replacing the part.

    In conclusion, the cost of replacing the rear wheel bearing on a Subaru Forester is not cheap. Depending on the model and year, it can range from a few hundred dollars to over a thousand. However, if done correctly, this repair can last for many years and help ensure a safe and reliable ride. The cost of replacing such an important component is well worth it to ensure the safe operation of your vehicle.

    Author Profile

    Carl Frisch
    Carl Frisch
    With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

    As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

    As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts