Solving the Subaru Clicking Noise When Accelerating

AvatarByCarl Frisch

Subaru clicking noise when accelerating is a common problem reported by many Subaru owners. It is usually caused by a worn or damaged CV joint or axle, or due to the accumulation of dirt and debris in the wheel hub. The clicking sound usually occurs when driving over bumps, going around corners, or during acceleration and deceleration. If left unchecked, it can lead to further mechanical damage and expensive repair bills. To prevent further damage, it is important to diagnose the cause of the clicking sound and take corrective measures as soon as possible. It is advisable to take your Subaru to a qualified mechanic for a thorough inspection and diagnosis as soon as you notice any clicking noises while accelerating.

Automobile: Subaru Clicking Noise When Accelerating

Common Causes of Clicking Noise When Accelerating Subaru Cars

When it comes to clicking noises during acceleration, there are several components that could be the cause in Subaru cars. The most common culprits are the engine, driveline, and transmission components. Other potential causes include worn tires and wheel bearings, as well as damaged or worn belts and pulleys. It is important to properly diagnose the source of the clicking noise to prevent further damage.

Diagnosing Clicking Noise in Subaru Cars

In order to properly diagnose the source of a clicking noise during acceleration in a Subaru car, it is important to first gather information about the noise. Listen for any changes in the sound when accelerating and decelerating, and pay attention to whether or not the sound is related to engine speed. Additionally, inspect all engine and transmission components for signs of wear or damage that could be causing an issue. Consider replacing any parts that are worn out or damaged.

Troubleshooting Tips for Clicking Sound When Accelerating Subaru Cars

There are several troubleshooting tips that can be used when dealing with a clicking sound during acceleration in a Subaru car. First, it is important to check the oil level regularly and make sure it is at an appropriate level. Additionally, check the exhaust system for any obstructions that could be causing an issue. Finally, listen for any loose or damaged parts during acceleration that could be causing a problem.

Repair Options for Subaru Cars with Clicking Noise During Acceleration

When dealing with a clicking noise during acceleration in a Subaru car, it is important to consider repair options as soon as possible in order to prevent further damage from occurring. If fluid leaks or broken hoses are present, make sure they are replaced immediately. Additionally, consider replacing any worn or faulty tires and wheel bearings as well as any damaged or worn belts and pulleys in order to ensure optimal performance of your vehicle’s powertrain system.

Tips To Avoid Clicking Noise In Subaru Cars While Accelerating

In order to avoid excessive clicking noises while accelerating in your Subaru car, there are several steps you can take to ensure optimal performance of your vehicle’s powertrain system. Make sure all tire air pressure levels are maintained at an appropriate level and ensure all fluids are at appropriate levels as well. Additionally, if you notice any loose parts while accelerating make sure those parts are secured properly before driving again. This will help reduce unnecessary wear on your vehicle’s powertrain system which can lead to costly repairs down the line if left unchecked.

Lower Maintenance Costs

Subaru cars are renowned for their long-term durability and reliability, but they also require regular maintenance to ensure they stay in tip-top condition. When a Subaru car is not properly maintained, it can cause unnecessary clicking noise while accelerating. This clicking noise is caused by worn or misaligned parts in the drivetrain, which can lead to increased wear and tear on the car’s components. By taking care of your Subaru car and performing regular maintenance checks, you can prevent unnecessary clicking noise while accelerating and save yourself money in the long run by avoiding costly repairs.

Improved Fuel Efficiency

When a Subaru car is not properly maintained, it can lead to decreased fuel efficiency due to the extra strain placed on the engine by the clicking noise while accelerating. By taking care of your Subaru car and performing regular maintenance checks, you can improve your car’s fuel efficiency as well as reduce emissions and help the environment. Regular engine tune-ups will also help your car run more efficiently and use less gas.

Reduced Chances of Breakdowns and Accidents

When a Subaru car is well-maintained, it will reduce the chances of breakdowns or accidents occurring due to the clicking noise while accelerating. Regularly checking fluid levels, brakes, suspension systems, tires, lights, filters and other important components will help prevent unexpected breakdowns or accidents caused by worn or misaligned components that may be causing the clicking noise while accelerating. By taking care of your Subaru car and regularly performing maintenance checks you can ensure that your vehicle runs smoothly and safely for many years to come.

FAQ & Answers

Q: What are the common causes of clicking noise when accelerating Subaru cars?
A: The common causes of clicking noise when accelerating Subaru cars include engine, driveline, and transmission components.

Q: How do you diagnose clicking noise in Subaru cars?
A: To diagnose clicking noise in Subaru cars, it is important to gather information about the sound as well as inspect the engine and transmission components. Consider replacing any worn parts that may be causing the issue.

Q: What are some troubleshooting tips to reduce clicking sound when accelerating Subaru cars?
A: Troubleshooting tips for reducing clicking sound when accelerating Subaru cars include regularly checking the oil level, examining the exhaust system for obstructions, and listening for loose or damaged parts during acceleration.

Q: What repairs should be made to a Subaru car with a clicking noise during acceleration?
A: Repairs that should be made to a Subaru car with a clicking noise during acceleration include replacing fluid leaks and broken hoses, replacing worn or faulty tires and wheel bearings, and replacing damaged or worn belts and pulleys.

Q: What can I do to avoid unnecessary clicking noises in my Subaru car while accelerating?
A: To avoid unnecessary clicking noises in your Subaru car while accelerating it is important to maintain proper tire air pressure levels and make sure all fluids are at appropriate levels. It is also beneficial to take care of your car in order to prevent unnecessary clicking noises while accelerating.

In conclusion, the Subaru clicking noise when accelerating is a common issue that can be caused by various factors. It is important to get the car serviced regularly and to replace worn out parts if necessary in order to prevent this from occurring. If the clicking noise persists even after regular maintenance, it is recommended to take the vehicle to a professional mechanic for further diagnosis and repair.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts