What is the Cost of Honda CRV Brake Pads and Rotors?

AvatarByCarl Frisch

Honda CRV brake pads and rotors cost depends on the type of brake pads and rotors chosen. Generally, brake pads are priced between $30 and $50 per axle, while rotors are priced between $50 and $100 per axle. The cost may increase if higher quality or performance parts are selected. Additionally, labor rates for installation can range from $50 to $100 per axle depending on the skill level of the mechanic performing the job. It is important to consider both parts and labor costs when estimating overall brake repair costs for a Honda CRV.

Automobile: Honda CRV Brake Pads and Rotors Cost

Types of Brakes

When it comes to brakes, there are several different types available. The most common type is the disc brake, which uses a set of brake pads to press against a rotor that is attached to the wheel hub. This causes friction which slows or stops the wheel. Drum brakes are another type of brake that uses a drum to slow or stop the wheel. Both disc and drum brakes can be found on most modern cars and trucks. Other less common types of brakes include ABS (anti-lock braking system) and regenerative braking systems, which use electrical motors to slow the vehicle.

Cost of Brake Pads

The cost of brake pads can vary significantly depending on the type of vehicle you have and the quality of the parts you purchase. Generally speaking, brake pad sets for standard vehicles typically cost between $30-$120 for a set, with higher-end cars requiring more expensive parts. Additionally, some vehicles require specialty parts that may cost more than standard sets. When purchasing brake pads, it’s important to ensure that you get parts specifically designed for your vehicle as generic pads may not fit properly or provide adequate stopping power.

Cost of Rotors

The cost of rotors also varies based on vehicle make and model as well as quality of parts purchased. Generally speaking, rotors typically cost between $30-$200 per rotor depending on size and type needed for your specific vehicle. Again, it’s important to ensure that you purchase parts specifically designed for your car in order to get optimal performance from your brakes.

Factors That Affect Price

When purchasing brake parts, there are several factors that can affect the overall price such as brand name, materials used in construction, additional features offered by each product (e.g., noise reduction technology), labor costs associated with installation and shipping costs if purchased online. Additionally, some manufacturers offer discounts or promotions from time to time so be sure to check their websites periodically for any deals they might have going on at any given time.

DIY Instructions for Replacing Brake Pads and Rotors on a Honda CRV

If you’re looking to save money on replacing your Honda CRV’s brakes then doing it yourself is an option worth considering! To start off with you’ll need some basic tools such as an adjustable wrench set, socket set and torque wrench as well as some new brake pads and rotors specifically designed for your Honda CRV model year/make/model combination (these can be found online or at most auto stores). Once you’ve gathered all the necessary tools and supplies you’ll want to refer to your owner’s manual or an online guide such as one provided by Haynes Repair Manuals before proceeding with any work on your car’s brakes system in order to ensure proper safety precautions are taken while working!

Removing the Wheels and Tires

When it comes to replacing Honda CRV brake pads and rotors cost, the first step is to remove the wheels and tires. This process requires a tire iron or lug wrench, depending on the type of wheel lugnuts you have. Start by loosening all of the lugnuts on each wheel before jacking up the vehicle and removing each wheel one at a time. Place each wheel off to the side on a flat surface so that they are not in your way while you work.

Accessing the Brakes

The next step is to access your brakes in order to inspect them before replacing them. You will need to remove the caliper bolts in order to gain access to your brake pads and rotors. Make sure that you are gentle with these bolts, as they can become stripped if too much force is applied. Once you have removed them, carefully slide off the caliper from its mount so that it is hanging freely from its brake line.

Inspecting the Brake System Components

Now that you have access to your brakes, it’s time to inspect them for any signs of wear or damage before replacing them. Inspect both your brake pads and rotors for any signs of uneven wear or cracking that would indicate they need to be replaced soon. If there are no signs of damage, then you should be able to reuse your existing components when replacing Honda CRV brake pads and rotors cost.

Removing the Old Brake Pads and Rotors

Once you’ve inspected your brakes, it’s time to remove them in preparation for their replacement. Start by removing any clips or brackets that may be connected with your current brake pad or rotor setup as well as any other components such as heat shields or dust shields that may be present in order for replacement parts will fit properly when installed later on. Once everything has been disconnected from its original mounting points, carefully slide out each component from its location within the vehicle one at a time until all old parts have been removed from their respective locations within the vehicle.

Installing New Components

The final step when it comes to replacing Honda CRV brake pads and rotors cost is installing new parts into place within your vehicle’s braking system. Start by placing all new components into their respective locations within the vehicle before reconnecting any clips or brackets that were removed during disassembly earlier on. Make sure everything is securely fastened down before moving onto installing new caliper bolts into place so that everything is secure once again before taking a test drive in order to ensure everything functions properly after installation has been completed successfully.

FAQ & Answers

Q: How much does it cost to replace the brake pads and rotors on a Honda CRV?
A: The cost of replacing the brake pads and rotors on a Honda CRV can vary widely depending on the type of brakes, the quality of the parts and other factors. Generally speaking, you can expect to pay anywhere from $300 to $800 for all parts and labor.

Q: What types of brakes are used in a Honda CRV?
A: The majority of Honda CRVs come with either disc brakes or drum brakes. Disc brakes use calipers to squeeze brake pads against a rotor, while drum brakes press brake shoes against an internal drum.

Q: How much do brake pads typically cost?
A: The price of brake pads varies based on their type, size, material, and brand. You can usually expect to pay anywhere from $20-$100 for replacement brake pads.

Q: How much do rotors typically cost?
A: The price of replacement rotors also varies greatly depending on size, type, material, and brand. Generally speaking, you can expect to pay anywhere from $30-$150 for replacement rotors.

Q: What factors affect the price of replacing brake pads and rotors in a Honda CRV?
A: There are several factors that can affect the cost of replacing brake pads and rotors in a Honda CRV including the type of brakes used (disc or drum), the quality of parts used, labor rates at your local repair shop, applicable taxes or fees, etc.

In conclusion, the cost of replacing the brake pads and rotors on a Honda CRV can vary significantly depending on the model year, condition of the vehicle, and replacement parts chosen. The parts themselves can be relatively affordable; however, labor costs can add up quickly. It is important to factor in all costs associated with replacement when budgeting for repairs.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts