How Much Does a Dodge Ram Brake Job Cost?

AvatarByCarl Frisch

A brake job on a Dodge Ram can be a costly repair. The cost of a brake job is dependent on several factors, such as the type of vehicle, the type of brakes, and the components that need to be replaced. Typically, the cost of a brake job will include the cost of labor and parts. Labor costs can range from $70 to over $200 per hour depending on the technician and location. Parts costs will vary depending on the type of brakes and components needed for the repair. The cost for new brakes, rotors, calipers, brake pads, etc., will add up quickly. Additionally, there may be additional fees for things like alignment or extra labor involved in replacing more complicated components. On average, you can expect to pay anywhere between $300 and $1000 for a complete brake job on your Dodge Ram depending on all of these factors.

Dodge Ram Brake Job Cost: Everything You Need to Know

Regular maintenance and repair of a Dodge Ram is essential for its longevity and performance. Knowing the cost of a brake job can help you stay ahead of any potential issues and ensure your vehicle is running safely and efficiently. This guide will discuss the common problems, repairs, and parts needed for a brake job on a Dodge Ram, as well as the cost associated with each repair.

Cost of Brake Job for Dodge Rams

The cost of a brake job on a Dodge Ram can vary from vehicle to vehicle depending on the parts needed, labor costs, and any additional repairs that may be necessary. Parts may include new brake pads, rotors, calipers, hoses, and hardware. Labor costs will depend on the type of brakes installed in your vehicle. On average, you can expect to pay anywhere from $400-$800 for a standard brake job on a Dodge Ram.

Regular Maintenance and Repair for Dodge Rams

Regular maintenance and repair of your Dodge Ram is important in order to keep it running smoothly and safely. The benefits of regular maintenance include improved fuel economy, smoother rides, better handling, longer life expectancy of the vehicle, and fewer costly repairs down the road. It’s recommended that you have your brakes checked every 15-20 thousand miles or every 6 months whichever comes first. Having an experienced professional perform routine maintenance will ensure that any potential problems are diagnosed early before they become major issues.

Common Issues with Dodge Ram Brakes

Common issues with Dodge Ram brakes can include poor braking performance due to worn out parts or components; pulsating brakes; soft or spongy pedal feel; grinding noises when braking; squealing noises when braking; pulling to one side when braking; leaking fluid from the brakes; or burning smell coming from the brakes. It’s important to have any issues diagnosed by a professional as soon as possible in order to prevent further damage or costly repairs down the road.

Parts Required for a Dodge Ram Brake Job

When performing a brake job on your Dodge Ram it’s important to use quality parts in order to ensure optimal performance and longevity of your brakes. Parts required for the job may include new brake pads, rotors, calipers, hoses, hardware kits (if applicable), and possibly even drums (if applicable). It’s recommended that you use OEM parts whenever possible as they are designed specifically for your model year vehicle which ensures proper fitment and performance. Quality aftermarket parts are also available if needed but be sure to research them thoroughly before purchasing them as some brands may not live up to expectations or offer warranties like OEM parts do.

Safety Considerations with a Dodge Ram Brake Job

Ensuring proper installation is key when it comes to safety considerations with any type of repair but especially so when dealing with brakes since they are responsible for stopping your vehicle safely in all conditions. Professional installation is highly recommended as improper installation can lead to dangerous situations such as poor braking performance or complete failure which could result in an accident or injury if not addressed promptly by an experienced technician familiar with repairing vehicles like yours specifically. After having any type of brake work done it’s important to drive cautiously until you’re certain that all components have been properly installed and adjusted properly so they function correctly while driving under normal conditions at normal speeds without issue or fail unexpectedly without warning after more aggressive driving scenarios such as highway speeds/conditions etc…

DIY vs Professional Brake Job on Dodge Rams

When it comes to brake jobs on Dodge Rams, you have two options: do it yourself or hire a professional. Doing the job yourself is often cheaper, but it also requires knowledge and skill in order to complete the repair correctly. On the other hand, hiring a professional can be more expensive but you can trust that the job will be done properly and safely. Let’s look at the pros and cons of each option.

Doing a brake job on your own requires an understanding of automotive repair, as well as some specialized tools. If you don’t have these skills or tools, then this may not be the best option for you. However, if you are comfortable with doing repairs yourself and have all the necessary tools, then doing a brake job on your own can save you time and money. It also gives you a sense of satisfaction knowing that you were able to accomplish the task yourself.

On the other hand, there are certain repairs that should only be done by professionals due to their complexity or safety risks involved. If your brakes need any major repairs such as replacing calipers or rotors, then it is best to leave this task to a professional technician who is experienced in completing these types of jobs. A professional technician will also have access to parts that may not be available for purchase by an individual consumer. This can help ensure that your brake job is done correctly and safely using quality parts with proper installation techniques.

Detailed Steps to Follow When Doing a Brake Job on a Dodge Ram

If you decide to attempt a brake job on your own Dodge Ram, then there are some specific steps that must be followed in order to ensure proper installation and safety of your brakes:
1) Begin by ordering all necessary replacement parts from either an online retailer or an auto parts store – this includes new pads and rotors (if needed).
2) After receiving all replacement parts, double-check that they are compatible with your vehicle before beginning work on the brakes themselves.
3) Thoroughly inspect existing components for signs of wear or damage before removing them from the vehicle – this includes pads, rotors, calipers, hub assemblies etc…
4) Once all components have been removed from the vehicle, it’s important to properly dispose of any old parts according to local laws and regulations – many auto part stores offer recycling programs for used automotive components such as brakes pads/rotors etc…
5) When installing new components onto the vehicle make sure they are properly secured using the appropriate hardware – if unsure about what type of hardware is required refer back to manufacturer specifications for your particular model year/make/model vehicle; otherwise take it into a professional service center who can provide assistance with installation steps if needed.
6) Finally when all components have been reinstalled test drive your vehicle under various conditions such as braking hard at different speeds in order ensure proper functionality before driving normally again; if any issues arise during testing take it back into a service center immediately for further inspection/repair work as needed.

Troubleshooting Problems with Your Dodge Ram’s Brakes

If problems arise while driving or when attempting repairs on your Dodge Ram’s brakes there are several diagnostic tests available which can help identify potential issues:
1) Visually inspect all components such as pads/rotors/calipers etc… for signs of wear or damage – some common issues include worn out friction material on pads as well as warping/scoring on rotors due to excessive heat buildup during use; if any irregularities are found replace affected component(s).
2) Perform “brake drag” tests by gently pressing down on pedal while stationary – this will help determine if caliper pistons are sticking due either lack of lubrication or debris build-up; if so clean affected area(s) with brake cleaner before reassembling calipers again; additionally make sure parking brake is completely released before attempting this test otherwise results may not accurately reflect actual issue at hand.
3) Check fluid levels both inside master cylinder reservoir (located under hood near firewall) as well as inside wheel cylinders (located behind each wheel); low fluid levels indicate either leak somewhere along hydraulic system which needs attention immediately (as driving without enough fluid can cause further damage); alternatively high levels could indicate trapped air inside system which needs bleeding out professionally in order restore optimal performance again (as air bubbles cannot be compressed like hydraulic fluid).

Costs Associated With Owning a Dodge Ram

The costs associated with owning and maintaining a Dodge Ram vary depending upon factors such as model year/make/model purchased along with frequency of use/mileage driven per year etc… However some basic upfront costs include purchasing price itself along with taxes & registration fees depending upon state where purchased; additionally fuel economy should also be taken into consideration when estimating long-term ownership costs since diesel engines tend consume more fuel than gas alternatives so keep this mind when shopping around for vehicles based upon budget constraints etc… Additionally DIY projects such as brake jobs may offer potential savings over hiring professionals although certain tasks should always left up experienced technicians due complexity involved so factor cost these services into overall budget accordingly before making final purchase decision accordingly.

Finding Quality Repair Services For Your Dodge Ram

Before entrusting someone else with repairing your beloved Dodge Ram there some key factors consider ensuring quality results: first off always choose experienced mechanic who has experience working specifically Dodges Rams since they will know exactly what look out for when diagnosing potential problems quickly & efficiently; secondly check references & reviews verify previous clients were satisfied services provided; finally compare prices different shops order get best deal possible taking time factor into account since sometimes paying bit extra worth getting job done quickly especially when dealing emergencies like broken down vehicles stranded side road somewhere remote location etc… In end taking care find reliable quality repair service worth effort invest upfront order avoid costly mistakes down line which could potentially lead even bigger headaches later down road!

FAQ & Answers

Q: What is the average cost of a brake job for a Dodge Ram?
A: The average cost of a brake job for a Dodge Ram is between $200 and $500, depending on the parts used and labor costs. This includes the price of pads, rotors, calipers, and other necessary components. Labor costs will vary depending on the mechanic you choose and their rates.

Q: What are some common problems with Dodge Ram brakes?
A: Some common problems with Dodge Ram brakes include worn or broken brake pads, damaged rotors, leaking fluid lines, and worn calipers. Other issues can include air in the lines or an inadequate amount of brake fluid.

Q: Are there any benefits to regularly maintaining my Dodge Ram’s brakes?
A: Yes! Regularly maintaining your Dodge Ram’s brakes can help prevent major issues from occurring in the future. It can also help ensure that your vehicle remains safe to drive by providing optimal braking performance. Additionally, regular maintenance can save you money in the long run by avoiding costly repairs down the road.

Q: What should I look for when choosing replacement parts for my Dodge Ram’s brake job?
A: When looking for replacement parts for your Dodge Ram’s brake job, you should look for quality parts that will last. You should also research different brands to find one that fits your budget and has a good reputation for reliability. Additionally, consider ordering OEM (original equipment manufacturer) parts to ensure they are compatible with your vehicle model.

Q: Is it possible to do a brake job on my Dodge Ram myself?
A: It is possible to do a brake job on your own if you have the right tools and have done research into what needs to be done beforehand. However, it is highly recommended that you take your vehicle to a certified mechanic if you are not experienced with performing repairs on vehicles yourself due to safety concerns.

In conclusion, the cost of a brake job on a Dodge Ram varies depending on the type of brakes and the service provider. It is important to do your research and shop around to get the best price. Additionally, it is important to make sure that you are dealing with a reputable service provider who has experience working on Dodge Rams. Doing so can help you ensure that your brake job is done correctly and safely, ultimately saving you money in the long run.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts