Troubleshooting

P0404 is an OBDII code that signifies a fault in the Exhaust Gas Recirculation (EGR) system in a Jeep Wrangler. This code indicates that there is an issue with the EGR valve, which controls the flow of exhaust gases back into the engine. The valve might be stuck open or not opening at all, resulting…

The 2013 Honda Accord VTC Actuator Recall is a safety recall issued by Honda Motor Co. in 2013 for certain Honda Accord vehicles due to a defect in the Variable Timing Control (VTC) actuator. The VTC actuator is responsible for controlling the timing of the engine valves and could become stuck, resulting in the engine…

o2 sensor signal stuck lean bank 1 sensor 2 is a diagnostic code indicating a malfunction within the oxygen (O2) sensor circuit on Bank 1 Sensor 2, which is located on the exhaust system of an internal combustion engine. The O2 sensor is responsible for monitoring the oxygen levels in the exhaust gases and sending…

When a vehicle’s VSA (Vehicle Stability Assist) and brake light come on simultaneously, it indicates that the vehicle’s stability control system has been activated due to a potential traction or stability issue. This can be caused by reduced tire pressure, uneven tire wear, worn brakes, or other mechanical issues. In some cases, it can also…

The Engine Malfunction/Power Reduced warning light in a Nissan Altima indicates that the vehicle’s engine control system has detected an issue with the engine, causing it to reduce power output. This can be caused by a number of different issues, such as a faulty spark plug, a dirty air filter, or a malfunctioning fuel injector….

Replacing the wheel bearings on a Chrysler 300 can be an involved process, but the cost of replacement parts and labor is relatively affordable. Generally, the front wheel bearings will need to be replaced more frequently than the rear ones, as they take more of a beating from everyday driving. The cost for parts and…

The Check Engine Light (CEL) is an indicator that something is wrong with the engine of your vehicle. When accelerating, it can be a sign that there is a problem with the emission control system or other components of the vehicle. If the CEL comes on when accelerating, it could mean that there is an…

Jeep Grand Cherokee Stuck in Park is a common problem that can occur in some models of this vehicle. It typically happens when the vehicle is in Park mode and the brake pedal is not being pressed, which prevents the shift lever from being moved out of Park. In some cases, the problem can be…

Honda CRV Shutter Grill Problem is a common issue that affects many vehicles. This problem occurs when the shutter grill, which is located behind the grille in front of the radiator, becomes clogged and causes air to be restricted from flowing into the radiator and cooling the engine. The shutter grill can become clogged with…

A pitman arm is a component of a vehicle’s steering system, located between the steering box and the steering linkage. When it becomes worn or damaged, it can cause a variety of symptoms, including difficulty steering, clunking noises and vibration when turning. Other signs that may indicate a bad pitman arm include loose steering and…