Troubleshooting

The P0322 Ignition Distributor Engine Speed Sensor is located on the engine block, typically near the crankshaft pulley. It is responsible for monitoring the rotational speed of the engine. The sensor sends a signal to the ignition control module, which then uses this information to determine when and how much fuel should be injected into…

The set button on a Toyota Corolla is a control used to set the car’s speed. This can be used to maintain a consistent speed when driving on highways or other roads where it is advantageous to maintain a steady speed. The Set button can be found on the left side of the instrument panel…

P2098 is a diagnostic trouble code (DTC) that indicates an issue with the secondary air injection system. This code can be caused by a faulty air pump, clogged hoses, or defective valves. To fix the P2098 code, you may need to replace the air pump and/or replace clogged or defective components in the air injection…

The 2012 Honda CR-V is a crossover SUV that comes with a 2.4L 4-cylinder engine and front-wheel drive. This model has a refrigerant capacity of 34 ounces (1,000 ml), which is the amount of refrigerant that should be used for the air conditioning system in this vehicle. The refrigerant helps to keep the air conditioning…

The Throttle/Pedal Position Sensor/Switch B Circuit High is an error code that is generated when the powertrain control module (PCM) detects an abnormally high voltage in the circuit of the throttle/pedal position sensor/switch B. This sensor is responsible for monitoring and regulating the air intake of the engine. When this error code is triggered, it…

When an engine is cold, a radiator fan is designed to turn on to help cool the engine. The fan’s blades draw in cooler air from outside the vehicle and push it through the radiator, which helps transfer heat away from the engine. This helps keep the engine running at a safe operating temperature, preventing…

A spark plug explosion in a cylinder is a rare but dangerous event that can occur in any internal combustion engine. This occurs when the spark plug is subjected to extreme pressure, temperature, and/or vibration, leading to the spark plug being pushed out of its position in the cylinder head. This can cause extensive damage…

Gas cap stuck on car is a common problem that many car owners have to face. This occurs when the gas cap becomes stuck on the fuel tank, either due to corrosion or because the threads of the cap have worn down. In some cases, the gas cap may be stuck due to a faulty…

The transmission speed sensor is located in the transmission of a vehicle. It is used to measure the rotational speed of the transmission’s input shaft. The sensor can be found on the side or rear of the transmission housing and is connected to a wiring harness. Depending on the make and model of a vehicle,…

A fuel pressure sensor circuit low is an indication that the fuel pressure sensor (FPS) is not working properly or is malfunctioning. This could be due to a loose or corroded wiring connection, a faulty component in the circuit, or a malfunctioning FPS itself. A low fuel pressure can cause a decrease in engine power…