Unlock the Power of Your Chevy 350 with the Best TBI Intake Manifold!
If you’re looking to maximize your Chevy 350’s performance, a high-quality TBI intake manifold is essential. Not only does it provide increased air flow and fuel delivery, but it also helps to reduce engine heat and increase power output. With so many options available, choosing the best TBI intake manifold for your Chevy 350 can be a perplexing task. To ensure the best performance while maintaining a balanced perplexity and burstiness in your engine’s output, it is important to choose the right intake manifold for your specific needs. In this guide, we’ll take a look at some of the best TBI intake manifolds for Chevy 350s and offer helpful tips for selecting one that fits your specific needs.
Why Best tbi Intake Manifold Chevy 350 Is Necessary?
The best TBI intake manifold for a Chevy 350 engine is necessary to ensure that the engine runs efficiently and effectively. It ensures that the car receives enough air and fuel to produce the power and torque needed to reach its maximum performance. The intake manifold also helps to create a balance between air and fuel, which is important for optimal combustion. Without a properly functioning intake manifold, the engine may experience decreased performance, increased fuel consumption, or even damage due to lack of airflow. Additionally, having an aftermarket TBI intake manifold can help boost horsepower and torque, making the vehicle more powerful than before.
Comparison Chart for Best tbi intake manifold chevy 350
Recommended Product Briefs on Best tbi intake manifold chevy 350 Are Listed Below
Speedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He
Holley 300-66 Strip Dominator Intake – Chevy Small Block V8
TYFYB Aluminum Satin Intake Manifold For Small Block Chevy SBC 305 327 350 400 1957-1986 1500-6500 RPM
Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75″ bore throttle body injection 1″ thick Fits Pattern 4-barrel Manifold Alloy Durable
Tektall Intake manifold adapter for TBI adapts a small block 1.75″ bore throttle body injection 1″ thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable
Speedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He
The Speedmaster 1-147-001 LowRise Intake Manifold is the perfect choice for a small block Chevy 350 engine from 1957-1995. This manifold features a low profile design and is street legal on pollution controlled vehicles. It comes with an adapter plate that allows for use of a square bore carb, if you wish to remain street legal. This manifold is a direct replacement for the stock manifold and provides superior performance with improved air flow and RPM range between idle-5,500. The Satin finish adds an ideal touch to any engine bay.
Why We Like This
Low Profile Design: This LowRise Intake Manifold is designed to be as low profile as possible while still providing superior performance.
Street Legal: The Speedmaster LowRise Manifold is street legal on pollution controlled vehicles, even when using a square bore carb.
RPM Range: The RPM range of this manifold ranges from idle-5,500, giving you improved air flow and performance without sacrificing your engines health.
Satin Finish: The Satin finish adds an ideal touch to any engine bay, making sure that your engine looks great as well as performs great!
Direct Replacement: This manifold is a direct replacement for the stock manifold on 1957-95 Small Block Chevy 350 engines, making it an easy upgrade for those looking for improved performance without major modifications or overhauls.
Common Questions & Answers
Q: What type of engines can this intake manifold fit?
A: This intake manifold fits all 1957-1995 Small Block Chevy 350 engines.
Q: Is this intake manifold street legal?
A: Yes, this intake manifold is street legal on pollution controlled vehicles when using either a spread bore or square bore carburetor.
Q: What kind of finish does this intake manifold have?
A: This intake manifold has a Satin finish which provides an ideal touch to any engine bay.
Additional Product Information
| Height | 6.6 |
| Length | 22.7 |
| Weight | 18 |
| Width | 12.1 |
Holley 300-66 Strip Dominator Intake – Chevy Small Block V8
The Holley 300-66 Strip Dominator Intake is the perfect solution for serious power performance from your Chevy Small Block V8. With a high rise dual plane design, you’ll get an impressive idle to 6,000 RPM power band that will meet all of your needs. The port size is 1.89″ tall by 1.15″ wide with a front of 3.91″ and a rear of 5.40″. For easy installation, extra hardware is included as well as a 90-day warranty for added security.
Why We Like This
High rise dual plane design provides excellent performance
Port size offers great fitment
Extra hardware included for easy installation
90-day warranty provides added security
Impressive idle to 6,000 RPM power band meets all power needs
Common Questions & Answers
Q: What type of engine will this intake fit?
A: It’s designed specifically for Chevy Small Block V8 engines.
Q: Does this come with a warranty?
A: Yes, it comes with a 90-day warranty for added security.
Q: What kind of performance can I expect from this intake?
A: You can expect impressive idle to 6,000 RPM power band that will meet all of your needs.
Additional Product Information
| Length | 21.5 |
| Weight | 17 |
| Width | 13 |
TYFYB Aluminum Satin Intake Manifold For Small Block Chevy SBC 305 327 350 400 1957-1986 1500-6500 RPM
The TYFYB Aluminum Satin Intake Manifold is the perfect upgrade for your Small Block Chevy SBC 305 327 350 400 engine. This dual plane, 180 street manifold is designed to be used with Holley, Carter AFB or Edelbrock square flange carbs and provides ample power for a range of 1500-6500 RPM. It’s made from aluminum and has 1.23″ wide x 1.99″ tall port holes with a bolt hole pattern of 5.160″ x 5.625″. This intake manifold fits 1957-86 SBC Chevy engine applications, so you can rest assured that it’ll be a great fit!
Why We Like This
It provides maximum power between 1500-6500 RPM
The aluminum construction is lightweight yet durable
The 1.23″ wide x 1.99″ tall port holes allow for optimal airflow
The 5.160″ x 5.625″ bolt hole pattern ensures an easy installation process
It’s compatible with Holley, Carter AFB or Edelbrock square flange carbs
Common Questions & Answers
Q:What engines will this intake manifold fit?
A:This intake manifold fits 1957-86 SBC Chevy engine applications.
Q:What type of carburetor does this use?
A:This uses Holley, Carter AFB or Edelbrock square flange carbs.
Q:How much power does it provide?
A:This intake manifold provides maximum power between 1500-6500 RPM.
Additional Product Information
| Height | 5.51 |
| Length | 22.44 |
| Weight | 17.6 |
| Width | 10.63 |
| Size | For SBC 305 327 350 400 57-86 |
Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75 bore throttle body injection 1 thick Fits Pattern 4-barrel Manifold Alloy Durable
Tektall Intake Manifold Adapter is the perfect choice for anyone looking to upgrade their throttle body injection system. Made from a durable, heat resistant composite material, this adapter is 1″ thick and fits perfectly on a 4-barrel manifold. With tapered bores to match the width of the TBI unit and the narrow Holley Edelbrock pattern 4bl manifold, it helps ensure that you get maximum performance from your setup. Plus, the mounting holes are slotted for easy tuning adjustments. The package includes one intake manifold adapter, one gasket, one mounting stud kit with nuts and washers and one manual.
Why We Like This
Made from a super durable and heat resistant composite material
Fits perfectly on a 4-barrel manifold
Tapered bores to match the width of the TBI unit and the narrow Holley Edelbrock pattern 4bl manifold
Slotted mounting holes for easy tuning adjustments
Includes an intake manifold adapter, gasket, mounting stud kit with nuts and washers and a manual
Common Questions & Answers
Q: What is included in this package?
A: The package includes one intake manifold adapter, one gasket, one mounting stud kit with nuts and washers and one manual.
Q: How thick is this adapter?
A: The Tektall Intake Manifold Adapter is 1″ thick.
Q: Does this fit on other types of manifolds?
A: Yes, this adapter fits perfectly on a 4-barrel manifold.
Additional Product Information
Tektall Intake manifold adapter for TBI adapts a small block 1.75 bore throttle body injection 1 thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable
Are you looking for an efficient and easy-to-install intake manifold adapter? Tektall has just the perfect solution for you! The Tektall Alloy Intake manifold adapter is designed to adapt a small block 1.75″ bore throttle body injection 1″ thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs. It is made of solid alloy with high finish, providing a durable and long lasting solution. This adapter comes with installation hardware, sealing gaskets, and manual, so you can install it easily without the need of purchasing additional bolts.
Why We Like This
Durable: The Tektall Alloy Intake manifold adapter is made of solid alloy with high finish, providing a durable and long lasting solution.
Easy Installation: This adapter comes with installation hardware, sealing gaskets, and manual, so you can install it easily without the need of purchasing additional bolts.
Smooth Transition: The shape of the holes provides a smooth transition from carbohydrates to air intakes.
Improved Throttle Response: With this intake manifold adapter installed, you’ll have improved throttle response.
Fits Most Carbs: The Tektall Alloy Intake manifold adapter fits most carburetors for small block 1.75″ bore throttle body injection 1″ thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs.
Common Questions & Answers
Q1: Is this compatible with other brands?
A1: Yes, this is compatible with most brands that use small block 1.75″ bore throttle body injection 1″ thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs.
Q2: How long will this last?
A2: Thanks to its solid alloy construction with high finish, the Tektall Alloy Intake manifold adapter should last you a very long time!
Q3: Will I need to purchase additional hardware for installation?
A3: No, everything you need is included in the package installation hardware and sealing gasket are included in the package as well as a manual for easy installation!
Additional Product Information
Benefits of Best tbi intake manifold chevy 350
1. Improved Airflow: The best TBI intake manifold for Chevy 350 is designed to improve the overall airflow in the engine, resulting in better performance and greater efficiency.
2. Increased Power and Torque: With improved airflow, the engine is able to make more power and torque, resulting in an increase in acceleration and overall power output.
3. Better Throttle Response: The improved airflow also results in better throttle response, giving the driver more control of their vehicle.
4. Improved Fuel Economy: By improving the airflow, the engine is able to burn fuel more efficiently, resulting in improved fuel economy.
5. Reduced Emissions: As the engine is able to burn fuel more effectively, it produces fewer emissions, making it an environmentally friendly option for those looking to reduce their carbon footprint.
Buying Guide for Best tbi intake manifold chevy 350
What to Look for in a TBI Intake Manifold Chevy 350?
1. Construction: The intake manifold should be made from a durable material such as aluminum or cast iron. If it is made from plastic, make sure it is of good quality and will not crack or break easily under pressure.
2. Bolts and Connectors: Make sure the intake manifold comes with all necessary bolts and connectors for installation. It should also have properly fitting gaskets to ensure a tight seal.
3. Design: The intake manifold should be designed to provide the optimal airflow for your engine, allowing for better performance and fuel efficiency. Look for one that has been designed specifically for the Chevy 350 engine.
4. Fuel System Compatibility: Make sure the intake manifold you choose is compatible with your fuel system, including the injectors, air meter, throttle body, and other components of your fuel system.
5. Ease of Installation: The intake manifold should be easy to install on your engine without any modifications or special tools required.
Cost-Effective Options
When shopping for an intake manifold, its important to consider cost as well as performance and other factors mentioned above. Here are some cost-effective options available that provide good performance and value for money:
1. Edelbrock Performer TBI Intake Manifold This is an affordable option that provides good performance and fits most Chevy 350 engines without modification or additional parts required.
2. Holley Sniper EFI TBI Intake Manifold This is an economical option that fits most Chevy 350 engines and provides excellent airflow for better power output and fuel efficiency.
3. Weiand Team G Intake Manifold This is an affordable option that provides improved airflow over stock manifolds but requires some modification for installation on some engines due to its length
The Best TBI Intake Manifold Chevy 350 is a great choice for anyone looking to give their engine a performance boost. With its lightweight design and large plenum, it gives your engine more power and torque while still maintaining excellent fuel economy. It is also easy to install and comes with all the necessary hardware and instructions. With its affordability, quality construction, and improved performance, the Best TBI Intake Manifold Chevy 350 is the perfect upgrade for any Chevy 350 engine.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.
As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- July 26, 2023BodyFind the Best Grill for Your 2007 Toyota Tacoma – A Complete Guide
- July 26, 2023BodyUpgrade Your Ford Escape with the Best 2008 Grill – Here’s How!
- July 26, 2023Bumper Stickers, Decals And MagnetsBest Chevy 1500 Door Emblem: Upgrade Your Truck with a Stylish Emblem
- July 26, 2023Marker Light AssembliesGive Your 2008 Dodge Dakota a Makeover with the Best Grill Upgrade