Unlock the Benefits of a Top-Rated Gas Furnace Ignition Sensor – Don’t Miss Out!
The best gas furnace ignition sensor is a vital component of any efficient home heating system. It ensures that your furnace is functioning at the highest level of efficiency and reliability, while also providing superior safety to you and your family. With its precise control over the ignition process, the best gas furnace ignition sensor can reduce energy consumption and decrease emissions, ensuring that your home remains warm and comfortable. Its unique combination of perplexity and burstiness makes it a top-choice for any homeowner looking to maximize the performance of their furnace.
Why Best Gas Furnace Ignition Sensor Is Necessary?
A best gas furnace ignition sensor is necessary to ensure that your gas furnace is functioning safely and efficiently. The sensor helps to detect the presence of a flame in the furnace and can be used to prevent dangerous accumulation of gas in the home. If a gas leak is detected, the sensor will shut off the flow of gas into the furnace, thus preventing an explosion or other types of damage. Additionally, the sensor helps to ensure that the furnace is operating at its optimal level for maximum efficiency and cost savings. By preventing dangerous gas accumulations and optimizing efficiency, a best gas furnace ignition sensor helps to keep your family safe and your energy bills low.
Comparison Chart for Best gas furnace ignition sensor
Recommended Product Briefs on Best gas furnace ignition sensor Are Listed Below
Flame Sensor for Goodman Furnace – Flame Sensor Igniter Sensing Rod for Goodman Janitrol Amana York Furnace, Replacement for The Part# 0130F00010 B1172606 B11726-06 (2)
Flame Sensor for Trane Furnace – Flame Sensor Igniter Sensing Rod for Trane XR80 XR90 XB80 XE80 and American Standard Gas Furnace, Heat Sensor Replace SEN01114 SEN00491 SEN0337 B340888P01-2PCS
Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004
Supplying Demand S8610U1003 S8610U3009 Furnace Pilot Ignition Control Module Natural Gas or Liquid Propane
62-22868-93 Furnace Ignitor Hot Surface Ignitor Compatible with Rheem Ruud Weatherking Furnace Replace 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S
Flame Sensor for Goodman Furnace – Flame Sensor Igniter Sensing Rod for Goodman Janitrol Amana York Furnace Replacement for The Part# 0130F00010 B1172606 B11726-06 (2)
Are you looking for a reliable flame sensor for your Goodman Janitrol Amana York furnace? Look no further! The Flame Sensor for Goodman Furnace is your perfect solution. This flame sensor has been designed to be easy to install and works well. It is an exact replacement for part 0130F00010 B1172606 B11726-06 20488501 and well-tested by the manufacturer before shipment. Crafted from durable material, this flame sensor resists wear and is sure to last you a long time.
Why We Like This
Easy to install
Perfect replacement for part 0130F00010 B1172606 B11726-06 20488501
Crafted from durable material that resists wear
Well-tested by the manufacturer before shipment
Perfect solution for Goodman Janitrol Amana York furnaces
Common Questions & Answers
Q: Is this a genuine product?
A: Yes, this flame sensor is an exact replacement for part 0130F00010 B1172606 B11726-06 20488501 and has been tested by the manufacturer before shipment.
Q: Is it easy to install?
A: Yes, this flame sensor has been designed to be easy to install.
Q: How durable is this product?
A: This flame sensor has been crafted from durable material that helps resist wear and tear.
Additional Product Information
| Length | 4.88 |
| Width | 3.31 |
Flame Sensor for Trane Furnace – Flame Sensor Igniter Sensing Rod for Trane XR80 XR90 XB80 XE80 and American Standard Gas Furnace Heat Sensor Replace SEN01114 SEN00491 SEN0337 B340888P01-2PCS
If you have a Trane Furnace or American Standard Gas Furnace and need a flame sensor, then look no further than this Flame Sensor for Trane Furnace. This flame sensor is designed to fit models such as the Trane: TUH2B080A9V3VAA, XR80 TUD1D120A9601AA, TUE060A936KO, XE90 TUC060C936B4, XB80 TUE080A936L3, and TUD1B060A9361AB. It can also fit American Standard models such as AUC1C100A9481AD, CUB100A948C4, UC1B080A9421AE, ADD080C936C3, AUX1B060A9361AB and AUH2B060A9V3VAB. With its 3.4″ length and 90 degree “crook” on end approximate 2″, this is an ideal replacement part for your furnace.
Why We Like This
Easy to install – With its 3.4″ length and 90 degree “crook” on end approximate 2″, this is an easy to install replacement part for your furnace.
Compatible with various models – This flame sensor is designed to fit models such as the Trane: TUH2B080A9V3VAA, XR80 TUD1D120A9601AA, and American Standard models such as AUC1C100A9481AD, CUB100A948C4, UC1B080A9421AE.
Saves time – Replacing your flame sensor can save you time in troubleshooting why your furnace isnt heating correctly or running only for a few minutes.
Durable construction – This flame sensor is made from durable material to ensure it will last for many years of use.
Affordable – It comes in a pack of two which makes it an affordable option when you need to replace your flame sensors quickly and effectively.
Common Questions & Answers
Q: What are the most common reasons for replacing the flame sensor?
A: The most common reasons for replacing the flame sensor are when the furnace doesnt heat or runs only for a few minutes.
Q: Will this flame sensor work with my furnace?
A: Yes, this flame sensor is designed to fit various models including Trane and American Standard furnaces so it should work with your furnace model. Please confirm your original part number against our product description before ordering.
Q: Is this product durable?
A: Yes! This flame sensor is made from durable material to ensure it will last through many years of use without needing replacement again soon after installation.
Additional Product Information
| Length | 3.5 |
| Weight | 0.03 |
| Width | 1.9 |
Furnace Hot Surface Ignitor Direct Replacement for Carrier Bryant Payne OEM Part LH33ZS004
This Furnace Hot Surface Ignitor is a direct replacement for Carrier Bryant Payne OEM Part LH33ZS004. It offers an easy installation and is made of high-quality materials that are long-lasting and reliable. Model Number CECOMINOD002711, with Item Package Length 6.099999993778, Item Package Width 3.099999996838, and Item Package Height 3.099999996838, this product is sure to make your furnace run efficiently and effectively.
Why We Like This
Easy installation
High-quality materials
Reliable
Long-lasting
Direct replacement for Carrier Bryant Payne OEM Part LH33ZS004
Common Questions & Answers
Q: How does this product install?
A: It has an easy installation process that is designed for user convenience.
Q: What material is this product made of?
A: This product is made of high-quality materials that are reliable and long-lasting.
Q: Is this a direct replacement for Carrier Bryant Payne OEM Part LH33ZS004?
A: Yes, it is a direct replacement for Carrier Bryant Payne OEM Part LH33ZS004.
Additional Product Information
| Height | 6 |
| Length | 6 |
| Weight | 0.2 |
| Width | 6 |
Supplying Demand S8610U1003 S8610U3009 Furnace Pilot Ignition Control Module Natural Gas or Liquid Propane
The Supplying Demand S8610U1003 S8610U3009 Furnace Pilot Ignition Control Module is the perfect solution for those with natural gas or liquid propane furnaces. This module offers an alternate to traditional parts and can be used to replace a variety of part numbers including AP3157443, 780-715, 780-735, 780-737, 780-845, G600AX-1, G600AY-1, G600MX-1, G600NX-1, G600RX-1 and more! It is important to disconnect from the power and gas supply before servicing. This module is compatible with major brands and comes in a Supplying Demand packaging.
Why We Like This
24VAC | 50/60 Hz | 0.2A Current draw | Prepurge: 1 second 90 second trial | 5 minute retry
Compatible with major brands
Easy to install
Comes in Supplying Demand packaging
Alternate part numbers available
Common Questions & Answers
Q: Is this compatible with my furnace?
A: This module is compatible with major brands so it’s likely that it will be compatible with your furnace. You should always verify fitment with your specific application.
Q: How do I install this?
A: It’s easy to install! Make sure to disconnect from the power and gas supply before servicing.
Q: What are the alternate part numbers?
A: Alternate part numbers include AP3157443, 780-715, 780-735, 780-737, 780-845, G600AX-1, G600AY-1, G600MX-1, G600NX-1, G600RX-1, G670AW-1
Additional Product Information
| Height | 1.5 |
| Length | 5 |
| Width | 3 |
62-22868-93 Furnace Ignitor Hot Surface Ignitor Compatible with Rheem Ruud Weatherking Furnace Replace 62-22441-01 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S
The 62-22868-93 Furnace Ignitor Hot Surface Ignitor is an excellent choice for anyone who has a Rheem, Ruud, or Weatherking furnace. With this ignitor, you’ll be able to easily adjust the temperature in your furnace and keep it running properly. The ignitor is compatible with a variety of replacement models, including 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, and more. The high quality materials ensure greater power connection and longer service life. Installation is also easy with the included wire connectors.
Why We Like This
Compatible with a variety of replacement models
High quality materials for greater power connection
Longer service life
Easy installation with included wire connectors
Perfect fit for Rheem, Ruud, and Weatherking furnaces (not GEC or GED drum type)
Common Questions & Answers
Q: Does the ignitor come with instructions?
A: Yes! The package includes instructions for easy installation.
Q: Is this model compatible with all Rheem furnaces?
A: Yes! This model is compatible with all Rheem furnaces except GEC or GED drum type furnaces.
Q: Can I use this model to replace an older ignitor?
A: Yes! This model is designed to replace older models such as 62-22441-01, 62-22548-01, and more.
Additional Product Information
Benefits of Best Gas Furnace Ignition Sensor
1. Increased Efficiency: The best gas furnace ignition sensor helps to optimize the fuel/air mixture and ensure efficient combustion, leading to lower energy costs and a longer lifespan for the furnace.
2. Improved Safety: The sensors help to reduce the risk of dangerous gases building up in your home by monitoring the levels of Carbon Monoxide and other gases.
3. Reduced Noise: The latest gas furnace ignition sensors are designed with noise reduction technology, helping to keep your home quiet and comfortable.
4. Easy Maintenance: A good quality ignition sensor requires minimal maintenance and can be easily replaced if needed.
5. Reliable Performance: A good quality gas furnace ignition sensor is designed to provide reliable performance over a long period of time, helping you stay warm without worry.
Buying Guide for Best gas furnace ignition sensor
Types of Ignition Sensors
When shopping for the best gas furnace ignition sensor, it is important to understand what types of ignition sensors are available. There are two main types of ignition sensors hot surface igniters (HSI) and intermittent pilot (IP).
HSI sensors are electronic devices that use a high-voltage spark to ignite the gas. They are reliable and durable, and often require very little maintenance. They can be used in both natural gas and propane furnaces. The downside to HSIs is that they can be relatively expensive.
IP sensors are more commonly found in older systems, though some newer furnaces still use them. IPs utilize a standing pilot light that is constantly on and uses a thermocouple to sense when the flame has been extinguished. IPs require more maintenance than HSIs, but they tend to be more affordable.
Factors to Consider When Buying an Ignition Sensor
When purchasing an ignition sensor for your gas furnace, there are several factors you should consider. These include:
– Compatibility Make sure the sensor you choose is compatible with your furnace model and fuel type (natural gas or propane).
– Efficiency Look for an efficient sensor that will help reduce energy costs while providing reliable performance.
– Cost Both HSI and IP sensors come in a variety of price ranges, so make sure you get one within your budget with the features you need.
Where to Buy
When shopping for the best gas furnace ignition sensor, it is important to buy from a reputable source such as a certified HVAC dealer or online retailer. This will ensure that you get a quality product that meets all safety standards and comes with a warranty if something goes wrong.
The best gas furnace ignition sensor is an essential component of a gas furnace system. It is responsible for ensuring that the furnace starts up safely and efficiently. With proper maintenance, the best gas furnace ignition sensor can last for many years, helping to provide a reliable and efficient heating system. By researching and understanding the various types of these sensors available, homeowners can choose the one that best fits their needs and budget.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.
As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- July 26, 2023BodyFind the Best Grill for Your 2007 Toyota Tacoma – A Complete Guide
- July 26, 2023BodyUpgrade Your Ford Escape with the Best 2008 Grill – Here’s How!
- July 26, 2023Bumper Stickers, Decals And MagnetsBest Chevy 1500 Door Emblem: Upgrade Your Truck with a Stylish Emblem
- July 26, 2023Marker Light AssembliesGive Your 2008 Dodge Dakota a Makeover with the Best Grill Upgrade