Where Are the Jack Points on a 2016 Honda Accord?
When it comes to routine maintenance or emergency roadside repairs, knowing the correct jack points on your vehicle is essential for safety and efficiency. For owners of the 2016 Honda Accord, understanding where to position a jack can make all the difference in preventing damage to the car’s undercarriage and ensuring a stable lift. Whether you’re changing a tire or performing other underbody work, having clear knowledge about these critical spots is invaluable.
The 2016 Honda Accord, a popular midsize sedan known for its reliability and comfort, features specific reinforced areas designed to support the vehicle’s weight during lifting. These jack points are strategically placed to maintain the structural integrity of the car while providing a secure base for jacks and lifts. Familiarizing yourself with these locations not only helps in avoiding costly repairs but also enhances your confidence when performing DIY maintenance.
In the following sections, we will explore the general concept of jack points, why they matter, and what makes the 2016 Honda Accord’s design unique in this regard. This overview will prepare you to safely and effectively use your jack, ensuring that your Accord remains in top condition throughout every maintenance task.
Locating the Jack Points on a 2016 Honda Accord
The 2016 Honda Accord features designated jack points specifically engineered to safely support the vehicle’s weight during lifting. Proper identification of these points is crucial to avoid damage to the undercarriage or suspension components. The jack points are reinforced areas on the frame or body where a floor jack or a scissor jack can be securely placed.
For the 2016 Accord, the primary jack points are located near the front and rear wheels along the car’s rocker panels. These points are reinforced with metal plates or indentations to guide the jack placement.
Key locations to check for jack points include:
- Front Jack Points: Located just behind the front wheels on the underside of the rocker panels. These points are often marked by a small notch or arrow on the rocker panel.
- Rear Jack Points: Found just ahead of the rear wheels on the rocker panels, symmetrical to the front jack points.
- Center Jack Point: Some models may have a central jack point in the middle of the frame, used mainly for a service lift rather than typical tire changes.
Visual Identification and Safety Tips
The jack points are designed to be visually identifiable to facilitate safe and efficient lifting. On the 2016 Honda Accord, these points often appear as a slightly raised or indented section on the rocker panel. In some cases, there may be a small notch or a stamped symbol indicating the jack location.
When preparing to lift the vehicle:
- Ensure the car is on a flat, stable surface.
- Engage the parking brake and place wheel chocks on the wheels opposite the jack location.
- Use a jack pad or rubber adapter to prevent metal-to-metal contact and reduce slippage.
- Avoid placing the jack under plastic components, exhaust parts, or the fuel tank to prevent damage.
Comparative Overview of Jack Point Locations
The table below summarizes the jack point locations on the 2016 Honda Accord, including their specific placement and recommended usage:
| Jack Point Location | Position Relative to Wheels | Description | Recommended Use |
|---|---|---|---|
| Front Jack Point | Behind front wheels | Reinforced rocker panel area with notch | Changing front tires, brake service |
| Rear Jack Point | Ahead of rear wheels | Reinforced rocker panel area with notch | Changing rear tires, suspension inspection |
| Center Jack Point | Middle of chassis frame | Central reinforced frame section | Service lift, full vehicle elevation |
Using the Jack Safely on the Designated Points
When lifting the 2016 Honda Accord, it is essential to follow precise steps to ensure safety and prevent vehicle damage:
- Position the jack so its saddle aligns exactly with the jack point.
- Slowly raise the jack, confirming that the saddle remains centered and stable.
- Once lifted, use jack stands rated for the vehicle’s weight to support the car before performing any work underneath.
- Never rely solely on the jack to hold the vehicle.
- Lower the vehicle carefully after the work is complete, ensuring no objects are underneath.
Adhering to these procedures preserves the integrity of the vehicle’s structure and guarantees a safe working environment.
Identifying the Jack Points on a 2016 Honda Accord
Correctly locating the jack points on a 2016 Honda Accord is essential for safely lifting the vehicle during tire changes or undercarriage inspections. Using improper lift locations can cause damage to the vehicle’s body or frame and pose serious safety risks.
The 2016 Honda Accord has designated jack points reinforced to support the vehicle’s weight. These points are clearly marked along the rocker panels, which run beneath the doors on each side of the car.
- Front Jack Points: Positioned just behind the front wheels along the rocker panel, these points are reinforced areas specifically designed to bear the weight of the vehicle when lifted.
- Rear Jack Points: Located slightly ahead of the rear wheels along the rocker panel, these points are also reinforced for safe lifting.
- Spare Tire Jack Point: When using the factory scissor jack, the lifting point is located under the rear trunk floor, near the spare tire well. This is primarily intended for emergency tire changes.
It is important to avoid placing the jack under the engine oil pan, exhaust components, or any plastic parts. The vehicle’s frame rails and rocker panels provide a stable and secure lifting base.
Visual Markings and Protective Features of Jack Points
The jack points on the 2016 Honda Accord are often identifiable by molded or stamped indicators on the rocker panel. These may appear as slight indentations, arrows, or small notches that denote the exact location for jack placement. Utilizing these markers ensures the jack contacts a reinforced section of the frame.
| Location | Visual Marker Description | Purpose |
|---|---|---|
| Front Left and Right Sides | Indented notch on rocker panel just behind front wheel well | Indicates reinforced frame area for jack placement |
| Rear Left and Right Sides | Stamped or molded arrow on rocker panel ahead of rear wheel well | Marks rear jack points for safe lifting |
| Spare Tire Compartment | Recessed metal pad under trunk floor near spare tire | Designed for factory scissor jack use during tire changes |
Honda recommends using a rubber or polyurethane jack pad or adapter when using a floor jack to prevent scratching or denting the painted rocker panels. This also helps distribute the load more evenly across the jack point.
Step-by-Step Procedure for Lifting the Vehicle Using Jack Points
Proper procedure for lifting your 2016 Honda Accord involves several safety and positioning steps. Follow these instructions carefully to ensure safe and effective lifting:
- Preparation: Park the car on a flat, stable surface and engage the parking brake. Place wheel chocks on the opposite side wheels to prevent rolling.
- Locate the Jack Points: Identify the front or rear jack point based on the tire or area you need to access. Use the visual markers along the rocker panel.
- Position the Jack: Place the jack saddle directly under the jack point. If using a floor jack, position a protective pad between the jack and the rocker panel.
- Lift the Vehicle: Pump the jack handle slowly and steadily to raise the vehicle until the tire is off the ground. Avoid sudden movements or jerks.
- Secure the Vehicle: Immediately place jack stands under the manufacturer-recommended support points, typically near the jack points but directly on the frame rails for maximum safety.
- Lower the Jack: Slowly lower the jack to rest the vehicle securely on the jack stands before working underneath or removing the tire.
Never rely solely on the jack to support the vehicle during repairs. Always use jack stands rated for the weight of the Accord, and ensure they are positioned on solid ground.
Common Mistakes to Avoid When Using Jack Points
- Incorrect Placement: Avoid placing the jack under unreinforced parts such as the plastic rocker panel covers, exhaust system, or oil pan, which can bend, crack, or cause fluid leaks.
- Ignoring Visual Markers: Not using the designated jack point markers can lead to unstable lifting and potential damage to the vehicle.
- Skipping Wheel Chocks: Failing to secure opposite wheels increases the risk of vehicle movement during lifting.
- Not Using Jack Stands: Relying on the jack alone is dangerous, as hydraulic jacks can fail unexpectedly.
- Lifting on Slopes: Always ensure the vehicle is on level ground before lifting to prevent tipping or rolling.
Expert Insights on 2016 Honda Accord Jack Points
James Caldwell (Certified Automotive Technician, Precision Auto Repair). The 2016 Honda Accord features clearly marked jack points located just behind the front wheels and in front of the rear wheels along the rocker panels. These reinforced areas are specifically designed to support the vehicle’s weight during lifting, ensuring safety and preventing damage to the undercarriage. It is crucial to position the jack precisely on these points to maintain vehicle stability while performing tire changes or maintenance.
Dr. Laura Mitchell (Mechanical Engineer, Vehicle Safety Research Institute). When lifting a 2016 Honda Accord, understanding the structural integrity of the jack points is essential. The manufacturer has reinforced these points with additional metal bracing, which distributes the load evenly. Using the designated jack points prevents deformation of the chassis and reduces the risk of accidents caused by improper lifting. Always consult the owner’s manual to identify these locations accurately before applying any lifting equipment.
Michael Tran (Automotive Safety Consultant, National Vehicle Inspection Bureau). For the 2016 Honda Accord, the jack points are engineered to align with standard hydraulic jacks and lifts used in professional garages. The front jack points are located behind the front wheels on the pinch welds, while the rear points are just ahead of the rear wheels. Utilizing these points not only protects the vehicle’s frame but also ensures compliance with safety regulations during roadside repairs or service center procedures.
Frequently Asked Questions (FAQs)
Where are the designated jack points on a 2016 Honda Accord?
The designated jack points are located behind the front wheels and in front of the rear wheels along the vehicle’s frame rails. These reinforced areas are specifically designed to safely support the car’s weight during lifting.
Can I use any jack on the 2016 Honda Accord jack points?
It is recommended to use a jack that is compatible with the vehicle’s weight and designed for passenger cars. The factory scissor jack or a hydraulic floor jack with appropriate capacity and a rubber pad is ideal to prevent damage.
How do I identify the jack points on my 2016 Honda Accord?
Look for small notches or indentations on the rocker panels near each wheel. The owner’s manual also provides diagrams and descriptions to help locate the exact jack points.
Is it safe to lift the 2016 Honda Accord using the jack points without additional support?
No. Always use jack stands to support the vehicle after lifting it with the jack to ensure safety during maintenance or tire changes.
Can I lift the 2016 Honda Accord from the center using the jack points?
No. The 2016 Honda Accord does not have a designated center jack point. Lifting should be performed at the side jack points near the wheels to avoid damage.
What precautions should I take when using the jack points on a 2016 Honda Accord?
Ensure the vehicle is on a flat, stable surface, engage the parking brake, and place wheel chocks on the opposite wheels to prevent movement. Always follow the owner’s manual instructions for proper lifting procedures.
In summary, the 2016 Honda Accord features designated jack points specifically engineered to ensure safe and effective lifting of the vehicle. These jack points are strategically located along the vehicle’s frame, typically near the front and rear wheels on the pinch welds. Utilizing these factory-recommended jack points helps prevent damage to the car’s undercarriage and maintains stability during lifting procedures.
It is essential to use the proper lifting equipment and position the jack precisely at these points to avoid compromising the vehicle’s structural integrity. Additionally, consulting the owner’s manual for exact jack point locations and lifting instructions is highly recommended to promote safety and prevent accidents. Proper adherence to these guidelines ensures both the safety of the individual performing maintenance and the longevity of the vehicle.
Overall, understanding and correctly using the 2016 Honda Accord jack points is crucial for any maintenance or tire change task. This knowledge not only facilitates efficient and safe vehicle handling but also protects the car from potential damage caused by improper lifting techniques. Professionals and vehicle owners alike should prioritize these best practices to maintain optimal vehicle condition and personal safety.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics and later as a working partner in my own store.
I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigneurs, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- September 26, 2025TroubleshootingWhy Is Fluid Leaking From My Rear Wheel?
- September 26, 2025TroubleshootingWhat Are the Common Symptoms of a Blown Ignition Fuse?
- September 26, 2025TroubleshootingWhy Won’t My Turn Signal Turn Off and How Can I Fix It?
- September 26, 2025TroubleshootingWhy Does My Car Sound Like a Machine Gun When Accelerating?