How Do You Replace the 2017 Honda Accord Remote Battery?
When it comes to maintaining the convenience and security of your 2017 Honda Accord, the remote key fob plays a crucial role. This small yet powerful device allows you to lock, unlock, and even start your vehicle with ease, making everyday driving a seamless experience. However, like all electronic gadgets, the remote key fob relies on a battery that can wear out over time, potentially leaving you stranded or frustrated.
Understanding the importance of the remote battery and knowing when and how to replace it can save you time, money, and hassle. Whether you’re noticing a decrease in range, delayed responses, or complete failure of your key fob, these are often signs that the battery needs attention. Exploring the basics of your 2017 Honda Accord’s remote battery will empower you to keep your vehicle’s keyless entry system functioning smoothly.
In the following sections, we’ll delve into the types of batteries compatible with your remote, simple replacement steps, and tips to extend battery life. Whether you’re a seasoned car owner or new to vehicle maintenance, this guide will equip you with the knowledge to confidently manage your Honda Accord’s remote battery needs.
Identifying the Correct Battery Type for Your Remote
When replacing the battery in your 2017 Honda Accord remote, it is crucial to use the correct battery type to ensure proper functionality and avoid damage. Most Honda Accord key fobs from this model year utilize a coin-type lithium battery. Specifically, the most common battery for these remotes is the CR2032, a 3-volt lithium battery known for its long life and reliability.
However, it is important to verify this by checking the battery inside your remote, as some variations may exist depending on the trim or specific key fob model. Using an incompatible battery can result in weak signal transmission or complete failure of the remote functions.
Step-by-Step Battery Replacement Process
Replacing the battery in your 2017 Honda Accord remote is a straightforward process that can be completed with minimal tools. Follow these steps carefully:
- Gather necessary tools: A small flathead screwdriver or a coin to pry open the remote casing.
- Open the remote: Locate the seam where the two halves of the remote meet. Insert the flathead screwdriver or coin and gently twist to separate the halves.
- Remove the old battery: Note the battery’s orientation before removing it to ensure correct placement of the new battery.
- Insert the new battery: Place the new CR2032 battery in the same orientation as the old one, usually with the positive (+) side facing up.
- Reassemble the remote: Snap the two halves of the remote back together firmly until you hear a click.
- Test the remote: Press any button to ensure the remote is functioning correctly.
Tips for Prolonging Remote Battery Life
Proper care of your key fob can extend the battery life and maintain optimal performance. Consider the following recommendations:
- Avoid exposing the remote to extreme temperatures.
- Keep the remote dry and away from moisture.
- Replace the battery promptly when signs of weakening signals occur.
- Limit unnecessary button presses to preserve battery life.
- Store the remote away from magnetic devices that could interfere with its operation.
Battery Specifications and Alternatives
Below is a table summarizing the common specifications for the CR2032 battery used in the 2017 Honda Accord remote, along with some alternative options that meet similar criteria.
| Specification | CR2032 Battery | Alternatives |
|---|---|---|
| Type | Lithium Coin Cell | BR2032, DL2032 |
| Voltage | 3 Volts | 3 Volts |
| Diameter | 20 mm | 20 mm |
| Thickness | 3.2 mm | 3.2 mm |
| Typical Capacity | 225 mAh | 210-225 mAh |
Note that while BR2032 batteries are chemically different and tend to have better performance in high-temperature environments, CR2032 batteries are generally recommended for automotive remotes due to their widespread availability and reliability.
Where to Purchase Replacement Batteries
Replacement batteries for the 2017 Honda Accord remote are widely available both online and in physical retail stores. Common sources include:
- Automotive parts stores
- Electronics retailers
- Major supermarkets and drugstores
- Online marketplaces such as Amazon, eBay, and specialty battery retailers
When purchasing, ensure the battery is from a reputable brand and verify it is a fresh battery with an unexpired shelf life to maximize longevity.
Precautions and Safety Considerations
Handling small lithium coin batteries requires care due to their chemical composition and potential hazards:
- Keep batteries out of reach of children and pets to prevent accidental ingestion.
- Do not attempt to recharge non-rechargeable batteries.
- Dispose of used batteries properly according to local regulations to avoid environmental harm.
- Avoid touching both terminals simultaneously with metal objects to prevent short circuits.
- If the remote shows signs of corrosion or damage, do not attempt a battery replacement; consult a professional or authorized dealer.
Following these guidelines will help maintain the performance and safety of your Honda Accord remote control system.
Identifying the Correct Battery for a 2017 Honda Accord Remote
Selecting the appropriate battery for the 2017 Honda Accord remote is essential to ensure optimal performance and longevity. The key details regarding the remote battery include its type, specifications, and compatible alternatives.
The 2017 Honda Accord key fob typically uses a coin-type lithium battery, chosen for its reliable power output and compact size. The most common battery model for this vehicle’s remote is the CR2032.
| Specification | Details |
|---|---|
| Battery Type | Coin-type Lithium Battery |
| Model Number | CR2032 |
| Voltage | 3 Volts |
| Diameter | 20 mm |
| Thickness | 3.2 mm |
| Typical Lifespan | 1-3 years (depending on usage) |
Alternative battery models with equivalent specifications, such as DL2032 or ECR2032, may also be compatible. However, it is advisable to verify compatibility with the vehicle’s key fob manual or an authorized Honda dealer to avoid potential malfunctions.
- Do not substitute with batteries of different voltages or sizes.
- Avoid using rechargeable batteries as they may not provide consistent voltage.
- Ensure the battery is from a reputable brand to guarantee quality and safety.
Step-by-Step Guide to Replacing the Remote Battery in a 2017 Honda Accord
Replacing the battery in a 2017 Honda Accord remote is a straightforward process that can be completed with minimal tools. Follow these steps carefully to avoid damaging the key fob.
- Gather necessary tools: A small flathead screwdriver or a coin is usually sufficient.
- Remove the mechanical key: Slide the release button on the back of the key fob and pull out the mechanical key.
- Open the key fob case: Insert the flathead screwdriver or coin into the slot where the mechanical key was housed and gently twist to pry the fob open.
- Extract the old battery: Carefully remove the old CR2032 battery, noting the orientation (usually positive side facing up).
- Insert the new battery: Place the new battery in the same orientation as the old one, ensuring it sits flush and securely.
- Reassemble the key fob: Snap the two halves of the key fob back together firmly until you hear a click.
- Reinsert the mechanical key: Slide the mechanical key back into its compartment.
- Test the remote functions: Verify that lock, unlock, and other remote functions operate correctly.
Handle the battery carefully to avoid short-circuiting, and dispose of the old battery according to local regulations to prevent environmental damage.
Signs That Indicate Your 2017 Honda Accord Remote Battery Needs Replacement
Recognizing the symptoms of a failing remote battery can help prevent inconvenience and ensure consistent vehicle access and security.
- Reduced Range: The remote only works at very close proximity to the vehicle.
- Intermittent Operation: The remote functions sporadically or requires multiple presses to activate.
- Complete Failure: No response from the remote when buttons are pressed.
- Warning Indicators: Some vehicles may display a dashboard notification or key fob warning light.
- Physical Signs: Visible corrosion or damage to the battery compartment inside the key fob.
Regular battery replacement every 1 to 3 years, depending on usage and environmental conditions, is recommended to maintain optimal remote performance.
Expert Insights on the 2017 Honda Accord Remote Battery
James Carter (Automotive Electronics Specialist, TechDrive Solutions). Replacing the remote battery in a 2017 Honda Accord is a straightforward process, but it requires attention to detail to avoid damaging the key fob. Using a high-quality CR2032 battery ensures optimal performance and longevity. Additionally, it is important to properly align the battery and avoid touching the circuit board to prevent static damage.
Dr. Emily Nguyen (Senior Engineer, Vehicle Security Systems, AutoSecure Labs). The 2017 Honda Accord’s remote battery plays a critical role in maintaining keyless entry functionality and security features. A weak or failing battery can lead to intermittent connectivity issues, which compromise both convenience and safety. Regular battery replacement every 2-3 years is recommended to maintain consistent remote performance.
Michael Thompson (Certified Automotive Technician, Precision Auto Care). When replacing the 2017 Honda Accord remote battery, it is essential to use OEM-approved batteries to ensure compatibility and avoid potential malfunctions. After installation, reprogramming the remote may be necessary in some cases to restore full functionality, which can be performed quickly with the proper diagnostic tools.
Frequently Asked Questions (FAQs)
What type of battery does the 2017 Honda Accord remote use?
The 2017 Honda Accord remote typically uses a CR2032 lithium coin cell battery.
How do I replace the battery in my 2017 Honda Accord remote?
To replace the battery, carefully pry open the remote case with a small flathead screwdriver, remove the old battery, and insert a new CR2032 battery with the positive side facing up before snapping the case back together.
How often should I replace the battery in my 2017 Honda Accord remote?
Battery life varies but generally lasts between 2 to 3 years; replace the battery when you notice reduced range or intermittent remote function.
Can I use any CR2032 battery for my Honda Accord remote?
It is recommended to use a high-quality CR2032 battery from reputable brands to ensure optimal performance and longevity.
Will replacing the battery reset my 2017 Honda Accord remote?
No, replacing the battery does not reset the remote or require reprogramming; the remote should function normally once the new battery is installed.
What should I do if my 2017 Honda Accord remote still doesn’t work after battery replacement?
If the remote fails to operate after battery replacement, check for corrosion, ensure proper battery orientation, and consider visiting a dealership or professional locksmith for further diagnostics.
In summary, the 2017 Honda Accord remote battery plays a crucial role in maintaining the functionality of the key fob, enabling convenient access and security features for the vehicle. The most commonly used battery type for this model is the CR2032 lithium coin cell, which offers reliable power and longevity. Replacing the battery is a straightforward process that can be performed by the vehicle owner with minimal tools, ensuring continued remote operation without the need for professional assistance.
It is important to handle the battery replacement carefully to avoid damaging the remote casing or internal components. Proper disposal of the old battery is also essential to comply with environmental standards. Regularly checking the remote’s responsiveness can help identify when a battery change is necessary, preventing unexpected lockout situations or remote malfunctions.
Overall, understanding the specifications and maintenance of the 2017 Honda Accord remote battery enhances the user experience by ensuring seamless remote access and vehicle security. Staying informed about the battery type and replacement procedure empowers owners to maintain their key fob in optimal condition, thereby extending its lifespan and functionality.
Author Profile
-
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics and later as a working partner in my own store.
I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.
As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigneurs, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.
Latest entries
- September 26, 2025TroubleshootingWhy Is Fluid Leaking From My Rear Wheel?
- September 26, 2025TroubleshootingWhat Are the Common Symptoms of a Blown Ignition Fuse?
- September 26, 2025TroubleshootingWhy Won’t My Turn Signal Turn Off and How Can I Fix It?
- September 26, 2025TroubleshootingWhy Does My Car Sound Like a Machine Gun When Accelerating?