What is the 2012 Honda Civic Starter Replacement Cost?

AvatarByCarl Frisch

The 2012 Honda Civic is a popular, reliable sedan that has been around for decades. It is known for its dependability and excellent fuel economy. If you own a 2012 Honda Civic and need to replace the starter, it can be expensive. Depending on the type of starter you need and where you get it from, the replacement cost can be anywhere from $150-$650.

When replacing the starter in a 2012 Honda Civic, there are several things to consider. First, you need to determine what type of starter your vehicle needs; standard or high-performance. Standard starters are usually less expensive but may not last as long as high-performance starters. Secondly, you will need to decide where to purchase your starter from; either at an auto parts store or online. Auto parts stores tend to have more options but may be slightly more expensive than buying online. Finally, labor costs should also be taken into consideration when replacing the starter in a 2012 Honda Civic as it can add significantly to the overall cost of the repair.

In conclusion, the cost of replacing a 2012 Honda Civic starter can vary greatly depending on what type of starter is needed and where it is purchased from. Labor costs should also be taken into account when budgeting for this repair.

Overview of 2012 Honda Civic Starter Replacement Cost

Knowing the cost of replacing a starter in your 2012 Honda Civic is important to ensure you get the best value for your money. Comparing prices between various vendors and taking into account the labor costs can help you make an informed decision. Labor costs can vary greatly depending on the complexity of the job, so it’s important to factor this in when budgeting for your repair.

Advantages of Replacing a Starter in Honda Civic

Replacing a starter in your Honda Civic can offer a range of benefits, including improved performance, longer lasting vehicle, reduced maintenance costs and improved fuel efficiency. A new starter is likely to be more reliable than an older one, meaning you won’t have to worry about sudden breakdowns or unexpected issues with starting your vehicle. In addition, having a newer starter can help reduce fuel consumption over time, saving you money at the pump.

Disadvantages of Replacing a Honda Civic Starter

Unfortunately, replacing your starter does come with some disadvantages. The parts and labor tend to be expensive and the process itself can be very time consuming. Additionally, there is also risk of damaging other parts during installation if not done properly by an experienced mechanic or technician.

Common Problems with 2012 Honda Civic Starters

The most common problems associated with 2012 Honda Civic starters are worn brushes, failed solenoid contacts, defective overrunning clutches, damaged terminals and failed bearings. Worn brushes are typically caused by excessive use or wear and tear over time that causes them to become brittle or unable to hold an electrical charge efficiently. Failed solenoid contacts can occur when too much current passes through them and they become corroded or burned out as a result. Defective overrunning clutches occur when they become loose due to poor lubrication or misalignment from wear and tear over time. Damaged terminals usually happen from contact with corrosive material due to age or contact with water which degrades their conductivity properties. Finally, failed bearings are typically caused by inadequate lubrication causing them to seize up due to friction damage from heat buildup over time.

Finding the Right Replacement Part for Your Honda Civic Starter

Finding the right replacement part for your Honda Civic starter requires careful consideration as there are several factors that need to be taken into account before making a purchase decision. Firstly you should identify both the part number and model number of your current starter so that you can make sure you’re selecting a compatible part for your vehicle’s engine type. Secondly it is important to read reviews online from other customers who have purchased similar products before so that you know what kind of quality to expect from your chosen supplier or manufacturer before making a purchase decision. Lastly it is also highly recommended that you consult professional mechanics or dealerships about any questions you may have about compatibility issues before buying any replacement parts for your vehicle’s engine system as this will save you both time and money in the long run.

Tools Required for Replacing a Starter in Honda Civic

Replacing a starter in a Honda Civic requires the right tools to ensure proper installation. A socket wrench set, screwdrivers, wire strippers/crimpers and a replacement starter kit are all necessary for the job. Make sure to have all the necessary tools before starting the job, as it will save time and help you get the job done right.

Procedure for Replacing a Starter in 2012 Honda Civic

The procedure for replacing a starter in 2012 Honda Civic involves three steps: removing the old starter motor, installing the new starter motor and connecting the electrical wiring harnesses. To start with, use your socket wrench set to remove all of the bolts that secure the old starter motor to the engine block. Once this is done, use your screwdrivers to remove any wiring harnesses that may be attached to it. Then, install your new starter motor by following all of the instructions that came with it. Finally, connect all of your electrical wiring harnesses back up to their respective terminals on both the engine block and new starter motor.

Tips for Installing a New Starter in 2012 Honda Civic

Before starting any installation process, it’s important to read through all of the manufacturer’s instructions carefully. This will ensure that you have everything you need and that you know exactly how to install it correctly. Additionally, make sure to wear protective gear such as gloves when working on your vehicle as well as use quality tools and replacement parts so that your installation is successful.

Troubleshooting Issues While Replacing a 2012 Honda Civic Starter

If you experience any issues while replacing your 2012 Honda Civic starter there are several things you can do first before calling a mechanic or taking it into a shop for repairs. First check your battery voltage level before beginning any work—this can often be an issue if it’s not at its optimal level or if there is an issue with its connection. Additionally, test voltage of all connections after completion just to make sure everything is working properly and lastly inspect any wiring harnesses for signs of damage or loose connections which could be causing an issue with power flow from one component to another.

Upkeep and Maintenance Tips for Your 2012 Honda Civic Starter

To ensure that your 2012 Honda Civic starter remains functioning properly it’s important to regularly check up on its condition as well as perform regular maintenance on it such as cleaning, lubricating and securely tightening components where necessary. Additionally replace faulty wiring or connectors immediately so they don’t cause further issues down the line and make sure proper battery voltage levels are maintained before operating your vehicle so it doesn’t have any issues starting up each time you need it too!

FAQ & Answers

Q: What is the cost of replacing a starter in a 2012 Honda Civic?
A: The cost of replacing a starter in a 2012 Honda Civic can vary depending on the part and labor costs. On average, the starter replacement cost for this vehicle is between $400 and $600.

Q: What are the advantages of replacing a starter in a Honda Civic?
A: Replacing a starter in a Honda Civic can offer several benefits, such as improved performance, increased fuel efficiency, better vehicle longevity, and reduced maintenance costs.

Q: What are some common problems with 2012 Honda Civic starters?
A: Some common problems with 2012 Honda Civic starters include worn brushes, failed solenoid contacts, defective overrunning clutches, damaged terminals, and failed bearings.

Q: What tools are required for replacing a starter in a Honda Civic?
A: The tools that are needed for replacing a starter in a Honda Civic include socket wrenches, screwdrivers, wire strippers/crimpers, and replacement starter kits.

Q: What tips should I consider when installing a new starter in my 2012 Honda Civic?
A: When installing a new starter in your 2012 Honda Civic it is important to read the manufacturer’s instructions carefully before starting the installation process. Additionally it is important to use quality tools and replacement parts to ensure proper installation as well as protective gear and gloves when working on the vehicle.

In conclusion, the cost of replacing a 2012 Honda Civic starter can vary depending on the make and model of your car and the type of starter you choose. Make sure to do your research when it comes to selecting a replacement starter, as this will ultimately determine the cost of replacing your starter. Additionally, it is important to remember that although labor charges may be expensive, they are necessary for ensuring your car starts properly.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts