Solving the Problem of 1999 Pontiac Grand Am Not Starting: What To Do When It Cranks But Won’t Start

A 1999 Pontiac Grand Am may not start even though it appears to be cranking. This can be caused by a variety of issues, including an electrical problem, an issue with the fuel system, or a mechanical problem. To diagnose the issue, it is important to first determine if the engine is receiving enough fuel and spark. If there is no spark at the spark plugs or no fuel pressure at the fuel rail, then it could be an electrical issue. If there is spark and fuel pressure present, then it could be a mechanical issue such as worn timing components or a bad crank sensor.

Automobile: 1999 Pontiac Grand Am Cranks But Won’t Start


Causes of a 1999 Pontiac Grand Am Not Starting



When a 1999 Pontiac Grand Am won’t start, it could be due to battery issues, fuel delivery problems, or ignition system problems. Battery issues can occur when the battery is dead or has become corroded. Fuel delivery issues could be a result of clogged injectors, faulty fuel filters, or a lack of fuel pressure. Ignition system problems can be caused by faulty spark plugs and wires, a malfunctioning ignition switch, or an electrical short in the wiring harness.

Troubleshooting a 1999 Pontiac Grand Am That Won’t Start



The first step in troubleshooting this problem is to check the battery and cables for corrosion and damage as well as checking that they are securely connected. If the battery is found to be okay then the next step is to inspect the fuel delivery system for clogged injectors, faulty filters and insufficient pressure. Finally, analyze the components of the ignition system such as spark plugs and wires and check that they are correctly connected.

Possible Solutions to a 1999 Pontiac Grand Am That Won’t Start



If any of these components are found to be faulty then they should be replaced or cleaned. The battery may need to be recharged or replaced if it has become completely drained of power. Fuel filters and injectors should also be checked for blockages and replaced if necessary. Spark plugs and wires should also be checked for damage and replaced if needed.

Common Issues in 1999 Pontiac Grand Am Starting Systems



A common issue with starting systems on these cars is failing starter motors which can cause intermittent starting problems or no starting at all. Another problem that can occur with this car is failing alternators and voltage regulators which can cause difficulty in turning over the engine when it is trying to start up.

Repairing/Replacing Parts of a 1999 Pontiac Grand Am Starting System



In order to repair or replace parts of the starting system on this car you will need to locate the starter motor under the engine bay and remove it in order to inspect it for faults or replace it entirely if needed. Alternators should also be inspected for faults as well as voltage regulators which may require replacement if they have failed due to age or wear-and-tear over time.

Cost of Repairing/Replacing Parts on a 1999 Pontiac Grand Am


If you own a 1999 Pontiac Grand Am and it is not starting, the first step is to identify what parts may need to be repaired or replaced. The two most common components that may need repair or replacement in this type of vehicle are the starter motor and alternator. The cost of repairing or replacing these parts can vary depending on the make and model of the car, as well as any other necessary components.

The cost of replacing a starter motor in a 1999 Pontiac Grand Am could range from $150 to $400, while the cost of replacing an alternator could range from $200 to $500. In addition, you may also need to purchase new belts and other small parts if any are needed for installation. It is important to consult your local auto repair shop for an accurate estimate before proceeding with any repairs.

Testing Components in a 1999 Pontiac Grand Am Starting System


In order to properly diagnose why your 1999 Pontiac Grand Am is not starting, it is important to test all components of the starting system. The components that should be tested include the starter motor, alternator and voltage regulator. Testing these components will help to determine if they are functioning properly or if they need to be replaced.

Testing the starter motor involves checking for proper operation, such as making sure it turns over when given power from the battery. Additionally, it should be checked for any signs of corrosion or damage that may have occurred over time. Lastly, testing the alternator and voltage regulator involves checking output levels and making sure they are within acceptable limits according to manufacturer specifications.

Diagnosing Electrical Issues in a 1999 Pontiac Grand Am


If your 1999 Pontiac Grand Am still will not start after testing all components in its starting system, then you may need to further investigate possible electrical issues that could be causing it not start properly. A few common areas where electrical issues can arise include faulty connections, blown fuses, and malfunctioning relays. To diagnose these problems accurately, one should use a multimeter or voltmeter device so that voltage readings can be taken at various points in order for any faulty connections or blown fuses/relays can be identified easily.

DIY Repairs for a 1999 Pontiac Grand Am Not Starting


For those who are mechanically inclined and have some basic knowledge of cars, there are some DIY repairs available that could help get your 1999 Pontiac Grand Am running again without having to take it into an auto repair shop. One example would be removing and replacing a faulty starter motor by following specific instructions based on your car’s make and model; this process typically requires basic tools such as ratchets and sockets along with some patience depending on how difficult it is remove/replace the part correctly without damaging anything else in its surrounding area. Additionally, checking an alternator on your own by using a multimeter device can also help determine if there is an issue with its output; this process does require some knowledge about how electrical systems work but does not necessarily require too much mechanical skill beyond being able to take apart certain pieces using basic tools such as pliers or screwdrivers if necessary.

Professional Services Available for Repairing a 1999 Pontiac Grand Am That Won’t Start


If you do not feel comfortable attempting any DIY repairs on your own then there are professional services available which specialize in repairing cars such as your 1999 Pontiac Grand Am that won’t start properly due to electrical issues or faulty parts needing replacement/repairment.. Car diagnostics services typically involve plugging into specialized devices which allow technicians access into various systems within your vehicle so they can accurately diagnose any possible problems which could be causing it not start correctly; this service usually comes at an additional cost but often times can save time and money when compared against trying multiple DIY fixes first before taking it into shop for professional assistance anyway due to them being able pinpoint issues quickly without having guesswork involved like with DIY attempts sometimes . Additionally many auto-shops also offer professional mechanic services where they can replace faulty parts directly such as starters & alternators etc.. This service usually requires more time & money upfront but often times guarantees quicker fix time frames than doing repairs yourself due their access better tools & resources plus technically skilled staff who specialize specifically on repairing vehicles like yours quickly & efficiently

FAQ & Answers



Q: What are the possible causes for a 1999 Pontiac Grand Am not starting?
A: The possible causes for a 1999 Pontiac Grand Am not starting include battery issues, fuel delivery problems, and ignition system problems.

Q: What is involved in troubleshooting a 1999 Pontiac Grand Am that won’t start?
A: Troubleshooting a 1999 Pontiac Grand Am that won’t start involves checking the battery and cables, inspecting the fuel delivery system, and analyzing the ignition system components.

Q: What are some possible solutions to a 1999 Pontiac Grand Am that won’t start?
A: Possible solutions to a 1999 Pontiac Grand Am that won’t start include replacing or recharging the battery, cleaning or replacing fuel filters and injectors, and replacing spark plugs and wires.

Q: What are some common issues in 1999 Pontiac Grand Am starting systems?
A: Common issues in 1999 Pontiac Grand Am starting systems include faulty starter motors and failing alternators and voltage regulators.

Q: What kind of professional services are available for repairing a 1999 Pontiac Grand Am that won’t start?
A: Professional services available for repairing a 1999 Pontiac Grand Am that won’t start include car diagnostics services and professional mechanic services.

In conclusion, the 1999 Pontiac Grand Am cranks but won’t start is a common issue with this model of car. It can be caused by a number of things, including worn spark plugs, faulty fuel pump, clogged fuel filter, or a weak battery. If you are experiencing this issue it is best to take your car to a qualified mechanic for proper diagnosis and repair.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts