What Causes Subaru Clunking Noises When Turning?

Subaru clunking noise when turning is a common issue encountered by owners of Subaru vehicles. The noise is usually caused by worn out suspension components such as bushings, ball joints, and tie rods. In most cases, the noise is not an indication of a major problem and can be fixed relatively easily with replacement parts. However, it is important to have a professional mechanic inspect the vehicle to ensure that these components are in good condition before attempting any repairs. Additionally, if the clunking noise persists after repairs, it could indicate an underlying issue such as a damaged axle or transmission that should be addressed promptly to avoid further damage.

Automobile: Subaru Clunking Noise When Turning

Common Issues

Subaru cars are known for their reliability and durability, but that doesn’t mean they don’t have their share of issues. One of the most common issues with Subarus is a clunking noise when turning the steering wheel. This noise can be caused by several different factors, including worn-out components or loose parts in the steering system. In some cases, it may even be related to an issue with the suspension system or other components of the car.

Regardless of the cause, this clunking noise can be very concerning for Subaru owners and should not be ignored. If you hear a clunking noise when turning your Subaru, it’s important to have it inspected right away in order to identify what is causing the issue and take steps to fix it before more serious damage occurs.

Inspection Tips

When inspecting a Subaru for a clunking noise when turning, there are several parts that should be looked at closely. First, check the ball joints and tie rods, as these are both common sources of clunking noises in Subarus. If any of these parts appear worn out or damaged, they should be replaced immediately. Additionally, inspect the bushings in the suspension system as well as any other components that could potentially cause a clunking noise when turning.

If all of these parts appear to be in good condition and properly attached to their respective components, then it may be necessary to take a closer look at some other potential causes such as worn engine mounts or even out-of-balance tires or wheels.

Troubleshooting Steps

Once you have identified what is causing your Subaru’s clunking noise when turning, it’s time to take steps to fix it. Depending on what is causing the issue, you may need to replace certain parts or make adjustments to existing ones in order to get rid of the noise. For example, if worn ball joints are causing your car’s clunking noise when turning then replacing them with new ones should eliminate the problem completely.

If your car’s clunking noise is being caused by an issue with one of its engine mounts then you may need to adjust its position slightly in order to reduce any vibrations that could be causing the problem. Additionally, if out-of-balance tires or wheels are causing your car’s clunking noise then you may need to have them balanced or replaced entirely before taking further action against it.

Replacement Parts

When replacing any parts on your Subaru due to a clunking noise when turning, make sure that you use only genuine OEM replacement parts from an authorized dealer in order to ensure optimal performance and longevity from them as well as compatibility with other components within your car’s system. Using aftermarket parts can often result in further complications down the line so it is important that you stick with only genuine OEM replacement parts whenever possible for your Subaru repairs and maintenance needs.

DIY Repair Solutions

For those who feel confident enough in their mechanical abilities and automotive knowledge they could attempt a DIY repair solution for fixing their Subarus clunking noise when turning instead of seeking professional help from an authorized dealer or mechanic shop.

However it is important that they do some research beforehand so they know exactly what needs doing before attempting any repairs themselves as well as being aware of any potential risks involved such as damaging other components within their cars system while doing so which could end up costing them more money than if they had just taken it into an authorized dealer/mechanic shop from start rather than attempting DIY repairs themselves later down line due unforeseen complications..

Benefits Of Professional Automotive Services For Clunkin Noise In Subarus

> Seeking professional assistance from an authorized dealer/mechanic shop for diagnosing and repairing your Subarus’clucking sound when turning can offer several benefits such as:

• Professional diagnosis – Having experienced mechanics assess what’s wrong with your vehicle through thorough diagnostics tests ensures accuracy which gives peace mind knowing exactly what’s wrong without having worry about potential risks involved while attempting DIY repairs yourself.

.• Expert Repairs – Authorized dealers/mechanic shops have access high quality OEM replacement parts which guarantee optimal performance longevity since compatible with existing components within vehicles system.

.• Warranty – Having work performed by certified mechanics provides warranty coverage for services which can save money time having resolve same problem twice due faulty repairs.

>There are several signs alert drivers potential problems before hearing actualyclucking sound such as: < br >< br >• Grinding noises coming from steering wheel while driving – This usually indicates worn out part(s) such as ball joint(s) tie rods which require immediate attention prevent further damage occurring.< br >< br >• Vibrations coming from steering wheel while driving – This usually indicates either misaligned tires out balance wheels which require alignment balancing respectively.< br >< br >• Squealing noises coming brake pedal while braking – This usually indicates either worn brake pads/shoes need replacing soon otherwise risk damaging rotors calipers leading additional costs associated fixing them.

Common Problems with Suspension and Steering Systems That Cause Clunking Noises in Subarus

Subaru vehicles are well-known for their reliability and durability, but they may still experience common issues such as clunking noises when turning. This can be caused by a variety of issues within the suspension and steering systems, including worn ball joints, tie rod ends, bushings, or steering racks. Other potential causes include damaged shock absorbers or strut assemblies, loose bolts or nuts, worn control arms or wheel bearings, and even improperly inflated tires. Knowing which components to check can help you pinpoint the exact cause of the clunking sound.

How to Maintain a Subaru Vehicle to Avoid Clunking Noises When Turning

Preventative maintenance is key to avoiding clunking noises when turning in Subaru vehicles. It is important to keep up with regular oil changes, tire rotations and alignments, as well as periodic inspections of suspension components like ball joints and tie rod ends. Additionally, make sure that all parts are tightened securely to avoid any rattling or clunking noises when driving.

Tips to Prevent Clunking Noises When Turning in Subaru Cars

Along with regular maintenance, there are also some steps you can take to help prevent clunking noises when turning in Subaru cars. If your vehicle has an adjustable suspension system such as coilovers or adjustable struts/shocks, make sure they are set correctly for your weight and driving style. Additionally, if you frequently drive over rough roads or off-road terrain it is a good idea to inspect the suspension components more frequently for signs of wear and tear.

How to Troubleshoot an Existing Clunking Sound When Turning in a Subaru Vehicle

If you already have a clunking noise when turning in your Subaru vehicle then it is important that you troubleshoot the issue immediately. Start by inspecting all major suspension components such as ball joints and tie rod ends for signs of wear or damage. Additionally check all bolts and nuts for tightness and make sure that your tires are properly inflated at all times. If these initial checks don’t reveal any issues then it may be time to take your vehicle in for professional service from an experienced mechanic who can diagnose the exact cause of the problem.

Knowing When to Seek Professional Help for Clunking Noises When Turning in Subarus

If you have done all of the above steps but still cannot identify the source of the clunking noise when turning in your Subaru vehicle then it may be time to seek professional help from an experienced mechanic who can diagnose the issue accurately using specialized tools and techniques such as using a stethoscope or performing a road test while monitoring other systems such as brakes or transmission fluid levels. Additionally they may also be able to recommend further repairs that will ensure your vehicle operates at peak performance levels going forward without additional problems caused by clunks or rattles while driving.

FAQ & Answers

Q: What are the common causes of a clunking noise when turning in Subaru cars?
A: Common causes of clunking noises when turning in Subaru cars can include worn suspension components, loose steering parts, or misaligned wheels.

Q: How can I diagnose clunking noises in my Subaru vehicle?
A: To diagnose clunking noises in your Subaru vehicle, you should start by visually inspecting the suspension components and steering system for any signs of wear or damage. You should also check for any loose or missing parts and check the alignment of the wheels.

Q: What repair options are available for a clunking noise when turning in a Subaru car?
A: Repair options for a clunking noise when turning in a Subaru car can include replacing worn or damaged suspension components, tightening loose steering parts, and realigning the wheels.

Q: What are the benefits of professional automotive services for a clunking noise when turning in Subarus?
A: Professional automotive services can provide an expert diagnosis and repairs that will help to ensure that your vehicle is running safely and efficiently. Professionals will also be able to identify any underlying problems with your vehicle’s suspension or steering system that may be causing the clunking noise.

Q: What signs should I look out for before a clunking noise appears in my Subaru vehicle?
A: Signs to look out for before a clunking noise appears in your Subaru vehicle can include increased vibrations while driving, decreased handling performance, and rattling or knocking sounds from underneath the car. Other signs to look out for include uneven tire wear, misalignment of the wheels, and excessive play in the steering wheel.

In conclusion, it is important to determine the source of the clunking noise when turning in a Subaru. It could be a sign of a worn out suspension part, or it could be something as simple as a loose bolt. If the noise persists after checking these components, then further inspection by an experienced mechanic may be necessary. A mechanic will be able to accurately diagnose and correct the issue, ensuring that driving your Subaru can remain safe and reliable.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts