Why Your Car Might Be Shaking After a Brake Change

Car shaking after brake change is a common issue that can occur when brakes have been changed or serviced. It is typically caused by a number of factors, including improper installation, worn components, or warped rotors. The shaking can range from slight vibrations to severe jolts, and can be felt in the steering wheel, seat, and pedals. It is important to have the issue addressed as soon as possible to ensure safe driving conditions and prevent further damage to the car’s braking system.

Steps that can be taken to diagnose and resolve the issue include inspecting the brake calipers for proper installation, checking the rotors for warping or excessive wear, and adjusting the brake pads for proper clearance and alignment. If necessary, replacement components may need to be purchased and installed in order to fix the problem. In some cases, a combination of these techniques may need to be employed in order to completely resolve the issue.

Common Causes and Underlying Issues

When a car begins to shake after a brake change, there can be several causes. The most common cause is the rotors and pads not being correctly installed, as this can lead to an imbalance in the braking system. Another potential cause is if the suspension system has become worn, which can lead to the car vibrating when the brakes are applied. Additionally, if the wheel hubs or bearings have been damaged, this can also lead to shaking when the brakes are applied. Finally, if the tires have become out of balance from wear or poor alignment, this can also cause shaking.

Steps to Diagnose a Car Shaking After a Brake Change

In order to accurately diagnose why a car is shaking after having its brakes changed, it is important to carefully inspect each component of the braking system. This includes checking both the rotors and pads for any signs of damage or incorrect installation, as well as inspecting the suspension system for any signs of wear or damage. It is also necessary to examine both the wheel hubs and bearings for any signs of damage or deterioration that could be causing an imbalance when brakes are applied. Additionally, it is important to review whether or not there may be an issue with tire balance that could be causing vibrations when braking occurs. Finally, it is important to analyze whether or not any of the shock absorbers may need replacement if they have become worn over time.

Benefits of Changing a Car’s Brake

Having new brakes installed on your car offers several benefits that will improve both safety and performance. The primary benefit from having new brakes installed on your vehicle is improved safety due to increased stopping power and reduced brake fade during heavy braking applications. Additionally, having new brakes will increase overall performance by providing more consistent stopping distances regardless of road conditions and allowing for smoother stops with less vibration during braking applications. Furthermore, replacing worn brake components will extend the lifespan of other components within your vehicle’s braking system by eliminating additional wear caused by inefficient brake performance. Lastly, having new brakes installed on your vehicle will reduce noise levels when you apply them due to improved friction between pads and rotors caused by newer components.

Tips for Replacing Car Brakes

When replacing your car’s brakes it is important to plan ahead in order ensure that you are able to get quality parts and components at an affordable price while making sure they are properly installed upon completion of installation services. It is important that you research reputable mechanics in your area who can provide you with quality parts at reasonable prices as well as professional installation services so that you know you are getting quality work done on your vehicle without having to worry about any additional problems occurring after installation has been completed.

Cost Implications of Replacing Car Brakes

The cost associated with replacing car brakes depends largely upon several factors such as type of vehicle being serviced as well as quality and brand name parts being used in order ensure proper functioning after installation has been completed. Additionally, it is important that you identify reputable mechanics in your area who offer reasonable prices on both parts and services in order get quality work done at an affordable cost so that you do not end up spending more than necessary on replacement services for your vehicle’s brake system components.

Signs That Your Car May Need Its Brakes Changed

It is important for drivers to keep an eye out for certain signs that may indicate their vehicle needs its brakes changed before more serious issues arise such as increased stopping distance when applying brakes or loud noises coming from wheels when applying them under pressure. Other signs include vibrations felt through steering wheel during braking applications along with noticeable resistance felt through pedal when applying them which may indicate excessive wear on components within brake system needing replacement in order function properly once again

Car Shaking After Brake Change

If your car is shaking after you changed the brakes, it could be due to a number of issues. It is important to diagnose the problem and take corrective action in order to ensure the safety of yourself and others. In this article, we will look at some of the most common causes for car shaking after brake change, as well as some tips for troubleshooting and repairs.

Unusual Noises When You Press on the Break Pedal

If you hear unusual noises when you press on the brake pedal, this could indicate that there is an issue with your brakes or suspension system. You may hear grinding or squealing noises, which can be caused by a number of things. It could be due to worn out brake pads, warped rotors, or loose suspension components. It is important to have these issues checked out by a qualified mechanic in order to ensure that your brakes are working properly.

Vibrations from the Break Pedal or Steering Wheel

Vibrations from the brake pedal or steering wheel can also indicate that there is an issue with your car’s braking system. This can be caused by improperly installed brake pads, warped rotors, or worn out suspension components. If you feel vibrations when applying pressure to either the brake pedal or steering wheel, it is important to have them checked out by a qualified mechanic in order to ensure that nothing is amiss with either system.

Appearance of Dark Fluid on Wheels or Ground Beneath Vehicle

If you notice dark fluid appearing on your wheels or on the ground beneath your vehicle, this could indicate an issue with one of several components related to your braking system such as leaking calipers or master cylinders. It is important to have these issues addressed immediately in order to avoid any further damage to other components of your vehicle’s braking system.

Difference Between Disc and Drum Brakes

Disc brakes and drum brakes are two common types of braking systems found in cars today. Disc brakes use a set of calipers that clamp down onto a rotor when pressure is applied to the brake pedal while drum brakes use a set of shoes that expand outward when pressure is applied in order to create friction which helps slow down the vehicle. Each type has its own advantages and disadvantages; disc brakes tend to provide better stopping power but may require more maintenance than drum brakes while drum brakes tend to cost less but may not provide as much stopping power as disc brakes do.

Understanding ABS (Anti Lock Breaking System)

ABS stands for Anti Lock Breaking System which helps prevent skidding during emergency braking situations by automatically modulating pressure being applied during braking while maintaining traction with the road surface under certain conditions. ABS works by monitoring wheel speed sensors and detecting when one wheel begins rotating faster than another indicating that it has lost traction with the road surface; it then modulates pressure being applied until traction has been regained allowing for better control over direction during emergency stops.

Maintenance Requirements for Your Car’s Breaking System

To ensure optimal performance from your car’s breaking system it is important perform regular maintenance such as inspecting all components for wear and tear including pads, rotors, calipers and master cylinders; checking fluid levels in master cylinder reservoir; keeping all hoses free from blockages; replacing worn out parts; and having any potential problems addressed quickly before they become major issues down the line. Regularly scheduling inspections can help keep any potential problems from arising which can save time and money in the long run since repairs are often much more expensive than preventative maintenance would have been if caught early enough.

Troubleshooting Issues with Your Vehicle’s Breaking System

Troubleshooting any issues related to your car’s breaking system may require some knowledge about how each component works together so understanding warning lights on dashboard can help identify what needs attention first so repairs can begin quickly before other parts become damaged due improper functioning brakes over time if left unchecked for too long . Diagnosing problems with ABS can also require some technical know-how but having an experienced mechanic inspect everything should make sure all repairs are done correctly so nothing else becomes damaged due improper handling during repairs .

FAQ & Answers

Q: What are the common causes of a car shaking after a brake change?
A: Common causes of a car shaking after a brake change may include worn rotors or pads, a problem with the suspension system, faulty wheel hubs or bearings, an imbalance in the tires, worn shock absorbers, or an issue with the Anti-Lock Braking System.

Q: What are the benefits of changing a car’s brakes?
A: Changing your car’s brakes can provide many benefits including improved safety, enhanced performance, extended lifespan of braking system components, and reduced noise levels when braking.

Q: What tips should I follow when replacing my car brakes?
A: When replacing your car brakes it is important to plan ahead for replacement, choose quality parts and components, and ensure proper installation of new brakes.

Q: What are the cost implications of replacing car brakes?
A: The cost of replacing your car brakes will depend on several factors including type and quality of parts used and labor costs. It is important to identify affordable reputable mechanics to help ensure you get quality services at competitive prices.

Q: What are signs that my car may need its brakes changed?
A: Signs that your car may need its brakes replaced include unusual noises when pressing on the break pedal, vibrations from the break pedal or steering wheel, and dark fluid appearing on wheels or ground beneath vehicle.

In conclusion, car shaking after brake change is a common occurrence and can be caused by many different factors. It is important to have a professional mechanic inspect the brakes if they are shaking after a brake change. If the brakes are not installed correctly or if they are old or worn, they can cause the car to shake. Additionally, it is important to make sure that the brakes are properly balanced and aligned in order to ensure a smooth ride. If all else fails, it may be necessary to replace the brakes entirely in order to ensure that your car runs safely and smoothly.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts