Huge Savings on the Best Clearance Lights for Trailers – Don’t Miss Out!

When it comes to making sure your trailer is seen and safe at night, the best clearance lights for trailers are essential. Clearance lights provide a vital warning that your trailer is on the road and help to keep you safe. Choosing the right clearance lights can be a perplexing task, but with the right knowledge and understanding, you can ensure you have the best lights for your trailer. In this introduction, we’ll explore what makes a good clearance light, the different types available and how to choose the best one for your needs. With this knowledge in hand, you’ll be able to choose the right clearance light with confidence and peace of mind.

Why Best Clearance Lights for Trailers Is Necessary?

Clearance lights for trailers are essential for safety and visibility. They help to make sure that your trailer is clearly visible to other drivers in low light conditions and at night. The lights also help to alert drivers that a trailer is present, and give them a greater level of awareness when sharing the road with you. Additionally, having the proper clearance lights can meet local laws and regulations, ensuring that you stay in compliance with the law while on the road.

Comparison Chart for Best clearance lights for trailers

Recommended Product Briefs on Best clearance lights for trailers Are Listed Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

15

PRODUCT NAME

15″ 9 LED 3 Red Trailer Light Bar [DOT FMVSS 108] [SAE P2] [IP67 Submersible] Identification Running Marker ID Rear Trailer Tail Light Bar for 80″ Enclosed Motorcycle Utility Marine Boat Trailers

10
PRODUCT IMAGE
2

4-Way Flat Trailer Wiring Tester [Nickel-Plated Copper Terminals] [Male & Female] [Continuity Test] 4-Pin Trailer Light Wire Circuit Tester

PRODUCT NAME

4-Way Flat Trailer Wiring Tester [Nickel-Plated Copper Terminals] [Male & Female] [Continuity Test] 4-Pin Trailer Light Wire Circuit Tester

10
PRODUCT IMAGE
3

Partsam 12V Submersible Square Led Trailer Lights Smoked Red Combination Led Stop Tail Brake Turn Signal Light for Trailers Under 80

PRODUCT NAME

Partsam 12V Submersible Square Led Trailer Lights Smoked Red Combination Led Stop Tail Brake Turn Signal Light for Trailers Under 80″ Boat Trailer Truck Marine Camper RV Snowmobile IP68 DOT Compliant

10
PRODUCT IMAGE
4

Nilight - TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light, 2 Years Warranty

PRODUCT NAME

Nilight – TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light, 2 Years Warranty

9
PRODUCT IMAGE
5

Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit Red 12 LED Waterproof 4

PRODUCT NAME

Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit Red 12 LED Waterproof 4″ Brake Stop Turn Tail Marker Trailer Lights Sealed Flush Mount for Truck RV Boat UTE UTV 12V Grommet Plug Included

10

15 9 LED 3 Red Trailer Light Bar [DOT FMVSS 108] [SAE P2] [IP67 Submersible] Identification Running Marker ID Rear Trailer Tail Light Bar for 80 Enclosed Motorcycle Utility Marine Boat Trailers

 15 9 LED 3 Red Trailer Light Bar [DOT FMVSS 108] [SAE P2] [IP67 Submersible] Identification Running Marker ID Rear Trailer Tail Light Bar for 80 Enclosed Motorcycle Utility Marine Boat Trailers

Check Price on Amazon

Do you need a reliable and DOT-certified light bar for your 80 trailer? Look no further than the 15″ 9 LED 3 Red Trailer Light Bar. This light bar is made of long-lasting stainless steel, a DOT FMVSS-108 rated reflective lens compliant with all relevant laws and regulations, and is waterproof and entirely submersible for unparalleled all-weather usability. It also features a mounting bracket with notches on its short sides for easy wire routing. Read on to learn more about why we love this light bar!

Why We Like This
A MUST FOR 80″ OR WIDER TRAILERS Trailers measuring 80″ or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.
DOT-CERTIFIED REFLECTIVE LENS Unlike cheaper, inferior quality ID bars, this unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations.
IP67 SUBMERSIBLE RATED Waterproof and entirely submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.
SOLID CONSTRUCTION Black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Stainless hardware included.
STRAIGHTFORWARD INSTALLATION Mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.5″ centers.

Common Questions & Answers
Q: Does this product come with installation instructions?
A: Yes! The 15″ 9 LED 3 Red Trailer Light Bar comes with detailed installation instructions so you can install it easily without any hassle.
Q: Is this product waterproof?
A: Yes! This light bar is IP67 Submersible rated so it can withstand any kind of weather conditions without any issues.
Q: Is this product compliant with all relevant laws and regulation?
A: Absolutely! This light bar has a DOT FMVSS-108 rated reflective lens design that meets all applicable standards and regulations.

Additional Product Information

Height 1.35
Length 14.25
Weight 0.31
Width 1.42
Size Standard

4-Way Flat Trailer Wiring Tester [Nickel-Plated Copper Terminals] [Male & Female] [Continuity Test] 4-Pin Trailer Light Wire Circuit Tester

 4-Way Flat Trailer Wiring Tester [Nickel-Plated Copper Terminals] [Male & Female] [Continuity Test] 4-Pin Trailer Light Wire Circuit Tester

Check Price on Amazon

The 4-Way Flat Trailer Wiring Tester is the perfect tool to quickly and easily test your trailer lights. Its plug-n-play design means you dont need any tools or additional accessories to get up and running. The two-sided design allows you to leave it plugged in or store it conveniently in your glove box, door pocket, or tool box. With its nickel-plated copper terminals, male & female continuity tests, and weather, corrosion, and impact resistant construction, this tester is designed for years of reliable service. This is a must have for anyone looking for an easy way to test their trailer lights.

Why We Like This:
Straightforward trailer light testing – simply plug the tester inline between the tow vehicle and trailer, turn on the lights and check the easy to read LEDs
Isolate problems quickly – by effectively splitting the trailer wiring harness in half, problems can be quickly traced to the tow vehicle side or the trailer side wiring.
No tools needed – plug-n-play design means you don’t need anything else to effectively test your trailer light harness
Long lasting construction – designed to be weather, corrosion, and impact resistant for years of reliable service
Convenient compact design -the two-sided design means you can leave it plugged in or store it conveniently in your glove box, door pocket, or tool box

Common Questions & Answers:
Q: How do I use this tester?
A: Simply plug the tester inline between the tow vehicle and trailer, turn on the lights and check the easy to read LEDs.
Q: Does this come with any additional accessories?
A: No additional accessories are needed as it’s a plug-n-play design.
Q: How durable is this tester?
A: Its designed with weather, corrosion, and impact resistant construction for years of reliable service.

Additional Product Information

Height 0.7
Length 6.5
Weight 0.09
Width 3.74

Partsam 12V Submersible Square Led Trailer Lights Smoked Red Combination Led Stop Tail Brake Turn Signal Light for Trailers Under 80 Boat Trailer Truck Marine Camper RV Snowmobile IP68 DOT Compliant

 Partsam 12V Submersible Square Led Trailer Lights Smoked Red Combination Led Stop Tail Brake Turn Signal Light for Trailers Under 80 Boat Trailer Truck Marine Camper RV Snowmobile IP68 DOT Compliant

Check Price on Amazon

Are you looking for a unique and stylish way to light up your trailer or boat? The Partsam 12V Submersible Square Led Trailer Lights Smoked Red Combination Led Stop Tail Brake Turn Signal Light is the perfect solution. This light is visually distinctive from most normal square tail lights on the market and is completely street legal. It’s also waterproof, making it ideal for use on trailers that may be submerged, like a boat trailer. With 15 diodes on the curb side and 19 diodes on the street side, this light serves 6 functions on the curb side and 7 functions on the street side including a license plate illuminator. Plus, it’s DOT compliant so you know that it can be used safely and legally.

Why We Like This
Visually distinctive from most normal square tail lights
Completely street legal
Waterproof construction
15 diodes on the curb side and 19 diodes on the street side
7 functions including a license plate illuminator
DOT compliant for safe and legal use

Common Questions & Answers
Q: Can this be used as a replacement for my existing trailer lights?
A: Yes, this light is perfect for use as a replacement trailer light for trailers under 80 inches in width.
Q: Is this light waterproof?
A: Yes, the circuit board of this light is sealed which makes it ideal for use on trailers that may be submerged like a boat trailer.
Q: What functions does this light serve?
A: This light serves 6 functions on the curb side (stop light, turn signal light, tail light, rear reflex reflector, side marker light, side reflex reflector) and 7 functions on the street side (stop light, turn signal light, tail light, rear reflex reflector, side marker light, side reflex reflector and license plate illuminator).

Additional Product Information

Nilight – TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light 2 Years Warranty

 Nilight - TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light 2 Years Warranty

Check Price on Amazon

The Nilight – TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp is a perfect choice for those who are looking for waterproof and durable lights. This light features three quality Piranha LEDs that provide a wider lighting angle, higher light intensity, and longer life. The micro-reflex faceted reflector design increases the light output and adds an exquisite appearance to the marker light. With a sonically welded lens and housing that is sealed against the elements, this product is ready to take on anything nature throws its way. The installation is simple, with just a black wire for ground and a red wire for positive. All you have to do is fix the black base with two flat head screws and then snap the light into the base no need to drill extra holes!

Why We Like This
Quality LEDs: This marker light uses three quality Piranha LEDs for better heat dissipation, wider lighting angle, higher light intensity, and longer lifetime.
Reflector Design: The micro-reflex faceted reflector design increases the light output making it more efficient and also adds an exquisite appearance.
Sealed Unit: Lens and housing are sonically welded as one unit with inside LEDs also surface-sealed so that its ready for any weather abuse.
Easy Installation: Just fix the black base with two flat head screws provided and then snap the light into the base no need to drill extra holes!
Warranty: This product comes with a 2 year warranty so you can rest assured knowing your purchase is protected.

Common Questions & Answers
Q: Is this product waterproof?
A: Yes, lens and housing are sonically welded as one unit with inside LEDs also surface-sealed so that its ready to take on any weather abuse.
Q: How bright is this LED side marker?
A: This side marker uses three quality Piranha LEDs which provide higher intensity of lighting that will last longer than regular LED lights.
Q: Is this easy to install?
A: Yes, installation is quick and easy – just fix the black base with two flat head screws provided and then snap in the side marker into place without drilling any extra holes!

Additional Product Information

Weight 0.31
Size 3.9 inch

Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit Red 12 LED Waterproof 4 Brake Stop Turn Tail Marker Trailer Lights Sealed Flush Mount for Truck RV Boat UTE UTV 12V Grommet Plug Included

 Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit Red 12 LED Waterproof 4 Brake Stop Turn Tail Marker Trailer Lights Sealed Flush Mount for Truck RV Boat UTE UTV 12V Grommet Plug Included

Check Price on Amazon

The Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit is a great choice for anyone looking to improve the lighting of their trailer. This kit includes four round red LED lights, each with 12 diodes that serve three functions: stop, turn and tail. The lights are waterproof and flush-mounted, so they stay secure against any rugged terrain you may encounter during your journey. They also come with a grommet and pigtails, allowing for easy installation on any 12V DC system.

Why We Like This
5 inch Diameter round Waterproof trailer light: The Partsam kit comes with four 5 inch round lights that are waterproof and impact resistant, making them perfect for any terrain you may travel on.
12 LED serves 3 functions: Each light has 12 LED diodes that serve three functions: stop, turn and tail.
Easy installation: Installing this kit is easy thanks to the included grommet ring and pigtails that allow it to be connected to any 12V DC system.
Compatible with almost all automobiles: These lights are compatible with most vehicles equipped with an 8-16 Volt DC power source, from semi trucks to pick up trucks and UTVs.
Accepts standard 3-prong plug: This kit also comes with a standard 3-prong plug that allows for quick connection without having to wire the lights yourself.

Common Questions & Answers

Q: Are these lights waterproof?
A: Yes! The Partsam 4Pcs 4 Inch Round Led Trailer Tail Lights Kit is IP65 waterproof so you can use them in rain or snow without worry of damage or corrosion.
Q: How do I install this?
A: Installation is easy! All you need to do is connect the included grommet ring and pigtails to your 12V DC system, then plug in the three-prong plug into the light fixture. White is the ground, red is the high brightness and black is low brightness as tail light/running light.
Q: Are these compatible with all vehicles?
A: These lights are compatible with most vehicles equipped with an 8-16 Volt DC power source ranging from semi trucks to pick up trucks and UTVs.

Additional Product Information

Size 4 inch round led trailer tail light

Benefits of Best Clearance Lights for Trailers

1. Easy Installation: The best clearance lights for trailers are designed to be easy to install and require minimal effort. This means you can have your trailer up and running quickly with minimal hassle.

2. Durability: The best clearance lights for trailers are made from high-quality materials that are designed to withstand the elements and provide lasting performance. This makes them a great choice for any trailer owner looking for reliable lighting options.

3. Safety: Clearance lights help increase visibility on the road and make it easier for other drivers to notice your trailer when youre on the move. This is essential for ensuring both yours, and other drivers safety on the roads.

4. Cost-effectiveness: The best clearance lights typically offer better value than other lighting options due to their durability and reliability, meaning you dont have to spend as much on replacing them in the long run.

Buying Guide for Best clearance lights for trailers

Types of Clearance Lights for Trailers

Clearance lights are important safety components of a trailer. There are different types of clearance lights available in the market, each designed to serve a specific purpose.

Incandescent Lights: Incandescent lights are the most common type of clearance lights found on trailers. These are powered by 12-volt DC and feature a filament bulb which produces light when electricity passes through it. They have a low power consumption and offer good illumination. However, they may require frequent replacement due to their short lifespan.

LED Lights: LED (Light Emitting Diode) lights are becoming increasingly popular for trailers due to their energy efficiency, long lifespan and bright illumination. They also last longer than incandescent bulbs and generate very little heat, making them ideal for use in enclosed spaces such as trailers. LED lights can be powered by both DC and AC current, allowing them to be used with various types of trailer wiring systems.

Fiber Optic Lights: Fiber optic lighting is an advanced lighting system that uses fiber optics instead of electrical wiring to transmit light signals across distances. This allows for brighter illumination and better visibility in darker environments such as trailers at night. Fiber optic lighting also consumes less electricity than traditional incandescent bulbs or LEDs, making it an energy-efficient choice.

Factors to Consider When Buying Clearance Lights for Trailers

Size: The size of the clearance lights needs to be taken into account while buying them for your trailer as they need to fit properly into the existing holes on the trailers frame or bodywork. If youre replacing existing lights on your trailer, then youll need to buy ones that have the same size as the ones being replaced or else they wont fit properly into place.

Style/Design: Clearance lights come in different styles and designs such as round, rectangular, square or oval shaped designs among others depending on the manufacturer you buy from. Choose one that complements the look and design of your trailer so it looks aesthetically pleasing when installed on your vehicle.

Voltage: The voltage requirement must also be taken into account while purchasing clearance lights for your trailer since they must be compatible with your vehicles electrical system in order to function properly without any issues or damage caused by power overloads or surges. Make sure to check if the lamps you intend to buy run on 12-volt DC or 24-volt AC current before making a purchase decision so you dont end up with incompatible products that cannot be used with your vehicle wiring system without causing any damage or problems down the line.

Conclusion
When buying clearance lights for trailers it is important to consider factors like size, style/design, voltage requirement etc., so that you can make an informed decision when selecting appropriate lamps for your vehicle’s lighting system which match its look and style and provide sufficient illumination in darker environments such as night time driving conditions on open roads with limited visibility because this can have significant implications on road safety and help prevent potentially fatal accidents from occurring due

Overall, the best clearance lights for trailers depend on your needs and budget. For a reliable, affordable choice, LEDs are a great option. If you need more customization or have a larger budget, then halogen and xenon lights are also worth considering. No matter which type of light you choose, make sure it is certified to meet DOT standards so that it will be safe and effective.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts