Is Your 2012 Chevy Cruze’s Transmission Slipping? Here’s What You Can Do

The 2012 Chevy Cruze is a compact car manufactured by American automaker Chevrolet. The transmission in the Chevy Cruze is designed to provide smooth and reliable performance. However, some owners of the 2012 Chevy Cruze may experience symptoms of transmission slipping, which can include difficulty shifting into gear, an abrupt change in engine speed or RPMs when shifting, and a delayed response when accelerating. Transmission slipping can be caused by several factors such as low or insufficient transmission fluid level, worn out clutch plates, or faulty solenoids. To address this issue, it is recommended to have the transmission system checked and serviced by a qualified mechanic. The mechanic may need to inspect the fluid levels, condition of the clutch plates and solenoids, as well as check for any other potential issues that could be causing the slipping. Additionally, if necessary they may recommend replacing worn parts to restore proper operation of the transmission system.

Automobile: 2012 Chevy Cruze Transmission Slipping

Common Issues & Symptoms

When it comes to the 2012 Chevy Cruze transmission slipping, there are several common issues and symptoms that can be easily identified. One of the most common issues is a delay in shifting gears, as well as grinding or clunking noises when shifting. The car may also take longer to accelerate, or jerk and shudder when accelerating. If the transmission fluid is low, or if there is fluid leakage, this could also be an indication of a slipping transmission.

Diagnosing Slipping Transmissions

In order to diagnose a slipping transmission in a 2012 Chevy Cruze, it is important to first assess the condition of the transmission fluid. If it is low or contaminated, this could be an indication that the transmission is having trouble operating correctly. It may also be necessary to check for any loose connections or worn components within the system. In some cases, a diagnostic scan may be required in order to determine exactly what is causing the issue.

Repair Solutions

Once a diagnosis has been made and it has been determined that the 2012 Chevy Cruze transmission is indeed slipping, there are several repair solutions available. The most common solution includes replacing certain parts of the transmission system such as seals, gaskets and other components that have worn out over time. It may also be necessary to replace the entire transmission if damage has become too severe. In cases where there are other underlying issues such as contamination or leaking fluids, these should also be addressed during repair in order to ensure that similar problems do not occur in future.

Advantages of Chevy Cruze Transmission

The advantages of having a Chevy Cruze with a reliable and durable transmission cannot be overstated. Compared to other cars in its class, such as Ford Focus and Honda Accord, it offers superior performance and reliability at an affordable price point. Its low maintenance requirements mean that owners can enjoy years of trouble-free driving without having to worry about unexpected repairs or breakdowns.

Cost of Replacing the 2012 Chevy Cruze Transmission

The cost of replacing the 2012 Chevy Cruze transmission will depend on several factors including labor costs and parts costs. Labor costs can vary significantly depending on location and type of work being done; however, labor costs typically range from $400 – $600 per hour depending on complexity of job and technician experience level. Parts costs will vary depending on what parts need replacing; however replacement options for transmissions can range from $1,000 – $3,000 depending on extent of damage and make/model of car being worked on..

Benefits of Professional Automotive Services for Chevy Cruze Transmissions

Although DIY auto repair may seem attractive for some people looking to save money on repairs; however seeking professional automotive services for your 2012 Chevy Cruze’s slipping transmission can offer several key benefits over DIY repair services: expert advice & guidance from experienced technicians; quality parts & workmanship guarantees; peace-of-mind knowing that your car will be repaired correctly; cost savings due to accurate diagnosis & repair solutions tailored specifically for your model & make..

Maintaining Your 2012 Chevy Cruze Transmission for Optimal Performance

Maintaining your 2012 Chevy Cruze’s transmission for optimal performance requires regular servicing & tune ups as well as regularly changing fluids & replacing worn components when necessary. Proper maintenance helps ensure long term reliability while reducing potential breakdowns due to wear-and-tear over time: Regular servicing should include checking all systems related to your vehicle’s engine as well as inspecting brake pads/shoes; engine air filters; spark plugs; belts & hoses; spark plug wires etc.. Additionally regular fluid changes such as brake fluid changes every 25k miles along with oil changes every 3k miles will help keep your vehicle running smoothly over time..


The 2012 Chevy Cruze is a popular compact car that has been praised for its fuel efficiency and overall reliability. However, some owners have reported that their Cruze’s transmission has been slipping, causing them to experience a decrease in performance. This article will look at the causes of transmission slipping in the 2012 Chevy Cruze and explore potential solutions.

What Causes Transmission Slipping in a 2012 Chevy Cruze?

The most common cause of transmission slipping in a 2012 Chevy Cruze is low fluid levels. The automatic transmission relies on fluid to keep it lubricated and functioning properly, and if it runs low it can cause the transmission to slip, resulting in lower performance. Other potential causes include worn or damaged internal components, such as gears or bearings, as well as faulty sensors or solenoids in the vehicle’s electronic control system.

How Can You Tell if Your Transmission is Slipping?

The most obvious sign of transmission slipping is a decrease in performance. If you are driving your 2012 Chevy Cruze and you notice that it is taking longer than usual for the vehicle to accelerate, then this could be a sign that your transmission is slipping. Additionally, you may also hear unusual noises coming from your engine when you accelerate or decelerate.

How Can You Fix Transmission Slipping?

If you suspect that your 2012 Chevy Cruze’s transmission is slipping, then the first step should be to check the fluid levels. If they are low then you will need to top them up with the correct type of fluid for your vehicle’s model year and engine size. Additionally, if there are any other signs of damage or wear then you should take your vehicle to a qualified mechanic who can carry out further tests and repairs as necessary.


Transmission slipping can be an issue with any car, including the 2012 Chevy Cruze. The most common cause of this issue is low fluid levels but it can also be caused by worn or damaged internal components as well as faulty sensors or solenoids in the car’s electronic control system. To fix this issue you should check the fluid levels first and if necessary take your car to a qualified mechanic who can diagnose and repair any other underlying issues that may be causing the problem.

FAQ & Answers

Q: What are common issues and symptoms of a slipping 2012 Chevy Cruze transmission?
A: Common issues and symptoms of a slipping 2012 Chevy Cruze transmission can include difficulty shifting gears, revving of the engine without an increase in speed, difficulty accelerating, and grinding or shaking when shifting gears.

Q: How do you diagnose a slipping transmission?
A: To diagnose a slipping transmission, it is important to check the fluid levels, inspect all electrical connections and other components related to the transmission, check for any signs of leakage, and perform a road test to verify symptoms.

Q: What are the advantages of the Chevy Cruze transmission?
A: The advantages of the Chevy Cruze transmission include superior performance, durability and reliability, and low maintenance requirements.

Q: How much does it cost to replace a 2012 Chevy Cruze transmission?
A: The cost of replacing a 2012 Chevy Cruze transmission will depend on factors such as labor costs, parts costs and replacement options. Generally speaking, total costs can range from $1,500-$3,000 or more depending on the severity of the issue.

Q: What are the benefits of professional automotive services for Chevy Cruze transmissions?
A: The benefits of professional automotive services for Chevy Cruze transmissions include expert advice and guidance from experienced technicians as well as quality parts and workmanship guarantees.

In conclusion, the 2012 Chevy Cruze’s transmission slipping issue has been a cause of concern for many drivers. However, the majority of cases have been resolved by replacing either the transmission fluid or the fluid filter. It is important to note that transmission slipping can be caused by a variety of other factors, including worn-out parts, improper maintenance, and incorrect operation. Therefore, it is important to have any transmission issues inspected by a certified technician before attempting to make repairs on your own.

Author Profile

Carl Frisch
Carl Frisch
With more than 30 years in the bicycle industry, I have a strong background in bicycle retailing, sales, marketing and customer service. I have a passion for cycling and a dedication to excellence. As a manager, I worked diligently to increase my capabilities and responsibilities, managing up to eleven mechanics (at Palo Alto Bicycles) and later as a working partner in my own store.

As the shop owner of Spoke n’ Word Cycles in Socorro, NM, the success of the mission was my responsibility, which I pursued passionately since we opened in 2003 through the spring of 2011. I am adept at managing owned and loan inventory, preparing weekly & annual inventory statements, and managing staff. The role as managing partner also allowed me tremendous freedom. I used this personal freedom to become more deeply involved in my own advancement as a mechanic, to spearhead local trail building, and advocating for cycling both locally and regionally.

As a mechanic, I have several years doing neutral support, experience as a team mechanic, and experience supporting local rides, races, club events. I consistently strive to ensure that bicycles function flawlessly by foreseeing issues and working with the riders, soigners, coaches and other mechanics. Even with decades of experience as a shop mechanic and team mechanic, and continue to pursue greater involvement in this sport as a US Pro Mechanic, and UCI Pro Mechanic.

Similar Posts